Our Products
Iron & Iron Products
2 Products availableMetal Pipes & Tubes
1 Products availableBrass & Copper Products
1 Products availableEarthing Equipment
1 Products availableWe offer a complete product range of EARTHING CHAMBERS, Galvanized Iron Flat, TIN COATING COPPER and LPI Lighting Arrester
Hot dip Galvanizing is the immersion of iron or steel articles in molten zinc to apply a protective coating. All material processed by Galco Steel is in accordance with I.S. EN ISO 1461: 2009.
Preparation :The galvanizing reaction will only occur on a chemically clean surface. Like most coating processes the secret to achieving a good quality coating lies in the preparation of the surface. It is essential that this is free of grease, dirt and scale before galvanizing. Contamination is removed by a series of processes. Firstly we degrease using a caustic solution into which the component is dipped. The article is then rinsed and then dipped in hydrochloric acid at ambient temperature to remove rust and mill scale. Welding slag, paint and heavy grease will not be removed by these cleaning steps and should be removed before the work is sent to the galvanizer. After further rinsing, the components are then dipped in a flux solution - usually about 30% zinc ammonium chloride at around 65-80C.
FEATURES :
| Model | Pipe Diameter (MM) | Length (M) | Chemical (Kg) |
| PTES - G22 | 40 MM | 1.5 M | 15 |
| PTES - G33 | 40 MM | 2 M | 20 |
| PTES - G44 | 40 MM | 3 M | 40 |
| PTES - G55 | 50 MM | 1.5 M | 15 |
| PTES - G66 | 50 MM | 2 M | 20 |
| PTES - G77 | 50 MM | 3 M | 40 |
| PTES - G88 | 80 MM | 2 M | 20 |
| PTES - G99 | 80 MM | 3 M | 40 |
| Model | Pipe Diameter (MM) | Length (M) | Chemical (Kg) |
| PTES - C22 | 40 MM | 1.5 M | 15 |
| PTES - C33 | 40 MM | 2 M | 20 |
| PTES - C44 | 40 MM | 3 M | 40 |
| PTES - C55 | 50 MM | 1.5 M | 15 |
| PTES - C66 | 50 MM | 2 M | 20 |
| PTES - C77 | 50 MM | 3 M | 40 |
| PTES - C88 | 80 MM | 2 M | 20 |
| PTES - C99 | 80 MM | 3 M | 40 |
Solid Copper Bonded Rod - Pure Copper Bonded Rod is made from 99.9% pure electrolytic copper. Solid copper rods offer greater resistance to corrosion. They are ideally used in applications where soil conditions are very aggressive.
Solid Copper Bonded Rod - Pure Copper Bonded Rod are of two types. Externally threaded and internally threaded. Solid Copper earth rods are used where the factor of corrosion is very high and exceptionally long life is required.
| Model | Pipe Diameter (MM) | Length (M) | Chemical (Kg) |
| PTES - CR44 | 12 MM | 2 M | 20 |
| PTES - CR55 | 12 MM | 3 M | 40 |
| PTES - CR66 | 16 MM | 2 M | 20 |
| PTES - CR77 | 16 MM | 3 M | 40 |
| PTES - CR88 | 19 MM | 2 M | 20 |
| PTES - CR99 | 19 MM | 3 M | 40 |
We specialize in manufacturing and supplying a wide range of Cast Iron Earth Plates. The cast iron surface of our plates ensures high quality and better performance of these products.
Precisely developed our products find wide application in different industrial and commercial sectors. Our plates are available in standard sizes and specifications. We quality check these on well-defined parameters before delivery to offer qualitative range at clients end.
FEATURES :
| Model | Plate (Sq.Ft) | Thickness (mm) | Chemical (Kg) |
| PTES - CI66 | 600 x 600 | 6 MM | 40 |
| PTES - CI77 | 600 x 600 | 12 MM | 40 |
| PTES - CI88 | 1000 x 1000 | 6 MM | 40 |
| PTES - CI99 | 1000 x 1000 | 12 MM | 40 |
Plate Earthing Copper-GI is a high quality electrical equipment, widely used in different residential complexes, commercial and industrial places. These earthing products, manufactured under the surveillance of expert professionals, are acknowledged for their precise dimension and smooth operation.
FEATURES :
| Model | Plate (Sq.Ft) | Thickness (mm) | Chemical (Kg) |
| PTES - CP88 | 600 x 600 | 3 MM | 40 |
| PTES - CP99 | 600 x 600 | 6 MM | 40 |
We endeavor our valuable clients a wide range of Earth Pit Chambers with high features, uniqueness, and extreme high quality. We are renowned in the market for its extraordinary quality as because these is been designed technically and physically to bear tough and course weather condition with the help of fine quality of raw elements which not only responsible for its durability but also for its power and potential and also ensures corrosion.Earth pit cover Hi grade Heavy duty polypropylene. HD PVC Chamber.
Having year of experience, we are involved in offering utmost quality of Galvanized Iron Flat. This Galvanized Iron Flat is known for its quality and it is designed as per the requirements. The offered Galvanized Iron Flat is extensively used to make steel, an even harder and tougher metal compound.
Catering to the demands of various industries, we offer quality range of Copper Plates, Sheets, Cakes and Circles. Known for their durability, strength and resistance against corrosion, our range is available in varied sizes and shapes.We even custom design these as per client specific requirement.
We are instrumental in offering the phenomenal range of LPI Lightning Arrester for the patrons. This lightning arrester is manufactured using high grade raw material and sophisticated technology at our vendor base. We made these products in complete adherence with the set industry norms. It is believed to be the prime needs for all the kinds of buildings and infrastructural facilities which protect the building from damaging.
In order to surpass quality the offered lightning arresters are stringently tested by our experts on various parameters to ensure defect free range. Clients can avail the offered range from us at market leading prices.
Powertecs Earthing Systems (Powertecs Earthing Systems)
No. 21, Lakshmanan Koundar Street, Nallampalayam Road, , Coimbatore, Tamil Nadu - 641006, India
Share us via
Write a Review
