Powertech Industries Mumbai, Maharashtra

'MASS' make thermowells are design to protect the temperature gauges from various corrosive media, Pressure, Viscous material or Velocity and abrasive's. A thermowell design permits quick removal and easy fitment of thermometer for replacement, repair and testing. 'MASS' thermowell features welding neck or screwed connection from solid bar construction to fit standard stem length.

Pressure gauge snubbers are intended to suppress the effect of pressure pulses and pressure peaks. The snubber is provided with an adjustable needle valve that enables to restrict the flow as operating conditions may demand even if the snubber is in service. The carefully adjusted snubber will considerably increase the service life of pressure gauges at arduos conditions such found at reciprocating pumps and compressors, hydraulic presses or fluid power systems and will additional improve the reading accuracy of the fitted gauge.Overpressure protector are intended to protect the pressure gauge against the effect of pressure that exceed the maximum pressure rating of the pressure gauge. Next to providing protection at faulty process conditions, the over pressure protector may also be used to isolate low pressure indicator at a system that requires to alternatively read very low and rather high pressure.ressure gauge syphons are intended to protect the pressure gauge from the effect of hot pressure media such as steam and also to reduce the effect of rapid pressure surges. Condensate of the pressure medium that is collected inside the coiled portion of the syphon prevents direct contact. When first installed the syphon should be filled with water or any other suitable separating liquid.

Dial Size:63mm, 100mm & 150mm, Accuracy :+ 2%+ 1% of full scale, Bourdon: SS316BrassMonelPhosphor Bronze, Movement:S.S. 304S.S. 316Brass, Case & Bezel:S.S. 304 Crimp type Snap Action Bayonet type, Range: Pressure upto 1400 kgcm, Vacuum & Compound Ranges, Joints:S.S. Bourdon tube tip and the socket ends are ARGON ARC WELDED and phosphor bronze bourdon tubes are silver brazedsoldered. Bourdon tubes are heat-treated and stress relieved, Mounting: Direct with bottom EntryDirect with bacl entryFlush Panel with back entry(Three PanelBracket)Surface with bottom entry.

Dial Size: 100mm, 115mm & 150mm, Accuracy: + - 1% of full scale, Bourdon:SS 316SS 316L, Temperature Element:Mercury actuated, Capillary Protectionl:SS 304 tubing with PVC or SS 304 armoured from 1m to 25m, Range in Degree Celsius:0 - 50 to 600, -38 to 50 & other compound ranges. Ranges in Degree Farenhit & scale on request, Accessories Option: Thermowells, Dual Scale, Calibration Cerificate, Antivibration Fitting, Filling Liquid(Glycerin or Silicon oil) and Electrical Contact.

MASS' make diaphragm sealed gauges are designed for systems needing contact surface that are rigorously cleanedand totally safe. The function of diaphragm is to isolate the pressure gauge from the process fluid, preventing bacteria developing inside pressure gauges sensing element.The advantage of the flush diaphragm gauges is easy to clean and quick release coupling.