Our Products
Industrial Seals
1 Products availableTube Fittings
1 Products availableOur product range contains a wide range of Diaphragm Sealed Pressure Gauges, Utility Pressure Gauges, Thermowell For Sensors and Temperature Gauges, Mercury Filled Temperature Gauge and mercury filled temperature gauges
MASS make Diaphragm Sealed Pressure Gauges are designed to measure the corrosive fluids pressure, where suitable material for bourden tube is not available.
The Diaphragm assembly withstand various corrosive actions encountered and seals the Bourdon tube from the process fluid. The displacement of the liquid filled in the Bourdon tube, through movement of the diaphragm, transmits the process pressure to the gauge. The Diaphragm sealed connections are available with threaded type, flanged type and capillary type mountings.
ifferent type of Chemical Seals can be provided such as : |
|
PRESSURE GAUGE END | |
Dial Size | 63mm, 100mm & 150mm |
Accuracy | 11% of thef.s.d. |
Bourdon material | Phosphor bronze / AISI 316 SS |
Socket | Brass/S.S. 304/S.S. 316 |
Movement material | Brass/S.S. 304/S.S. 316 |
Case & Bezel | Die Cast Aluminium Weatherproof housing, with screwed outer bezel, stoved enamel black finish. AISI 304 SS / AISI 316 SS Polished case and snap action bezel. |
Extra fitments | Micro Zero Adjustment Pointer Neoprene blow out disc. |
SEALED UNIT END | |
Upper Chamber Material | Mild steel painted in black / S.S. 304 / S.S. 316 |
Diaphragm Material | S.S. 316 / MONEL / HASTELOY - C / TENTALUM or any special material, if needed teflon sheating can be provided. |
Lower Chamber Material | S.S. 304 / S.S. 316 / MONEL / HASTELOY - C / TENTALUM or any special material. |
Connection | Threaded or flanged or flexible SS capillary can be provided. |
Sealing liquid | Silicone Oil or suitable liquid as desired by the user. DC-704, 710, FS 1265, Halocarbon. |
Temp. Limit | 45° C to 250°C Max. For high temp, go for cooling tower assembly - impulse tubing or capillary extension. |
MASS' make thermowells are design to protect the temperature gauges from various corrosive media, Pressure, Viscous material or Velocity and abrasive's. A thermowell design permits quick removal and easy fitment of thermometer for replacement, repair and testing.
'MASS' thermowell features welding neck or screwed connection from solid bar construction to fit standard stem length. 'MASS' can give thermowells in straight, tapered, stepped and standard flange construction. 'MASS' make thermowells are widely used for Bi-metal, Mercury, Gas filled thermometer, sensors and different application like Pulp and Paper industries, Food and Beverage industries, Machine and Apparatus construction, Chemicals, Petrochemicals, Fertilizers, Refineries, Pharmaceuticals and National Thermal Power Stations.
MASS make Master Gauges are designed for use as a reference gauge for recalibrating general service gauges, transmitters and other pressure operated instruments.
These gauges are easy to carry for field use and for spot inspections. To make reading easier and faster each pressure gauge is provided with readble dial. Reading error caused by paralax is eliminated by aligning the knife edge tip pointer with its reflection in the mirror band on the gauge.
The pressure element of these instruments has two S.S.316 bellows, balance mounted. The value shown on the dial is the difference between two input pressure or depressions coming in to each bellow. 'MASS' Differential Pressure Gauges are entirely made of S.S.316 wetted parts, therefore they offer the same corrosion resistance (inside and outside) as the Bourdon Pressure Gauges. Moreover the mechanical resistance of the bellows allows important one-sided overpressure, compare to the differential pressure (up to 20 times in some cases).
All differential pressure gauges are used for measurements of flow, level, filter clogging, pressure drop measurement, air conditioner & chemical processor.
Optional Features : |
|
Delta P |
Maximum static |
60 mbar not on the full scale |
4 bar |
100 mbar to 200 mbar |
4 bar |
200 mbar to 500 mbar |
6 bar |
350 to 1.6 bar |
20 bar MAXIMUM |
1.2 to 6 bar |
40 bar |
6 to 12 bar |
100 bar |
Diaphragm gauges are suitable for measuring pressure of all kind of fluid and gaseous medium. The measuring element is a sensitive corrugated diaphragm fixed between two flanges. For slurry and viscous liquids flanged connections can also be incorporated. Low Pressure Bellow Capsule Gauge are designed for non-corrosive and non-aggresive application.
These Gauges have bellow capsule which is composed of two corrugated metal discs of Brass / Stainless Steel joined by brazing / argon arc welding. A rise pressure will cause the corrugated Capsule / Diaphragms to expand and this motion is transferred to the indicator through sector, pinion movement mechanism. A similar type of low pressure built-in capsule gauge can also be offered having almost similar kind of mechanism.
"MASS", Weatherproof gauges are commonly used in Chemical Processing, Petroleum Refinery, Petrochemical, Fertilizer, Thermal & Nuclear Power generating industry & process applications.
Dial Size | ØR1 | ØR2 | ØR3 | ØR4 | R5 | P |
O (Square) |
L | ||
Surface Mounting | Other | Bottom | Back | |||||||
65mm |
68.5 |
61.5 |
85 |
75 |
78 |
37 |
33 |
14 |
10 |
10 |
100mm |
109 |
98.5 |
132 |
118 |
122 |
51 |
48.5 |
22 |
15 |
18 |
150mm |
166 |
151 |
186 |
168 |
176 |
52 |
48.5 |
22 |
20 |
22 |
MASS1 make differential pressure gauges are used to measure the pressure difference between two lines. Which can be directly indicated on dial. For ranges up to 6000 mmWC Max. Static pressure is 25kg/cm2 and for ranges 1 kg/cm2 to 10kg/cm2 Max. Static pressure is 40kg/cm2.
'MASS' make differential pressure gauges are suitable for Noncorrosive and Noncrystallizing gaseous and liquid media and that are not highly viscous.
'MASS' make differential pressure gauges are widely used across the Filters for Liquid control systems, Pharmaceutical industries, Chemicals, Petrochemicals, Fertilizers, Refineries and all Process industries