Power Drives Enterprises

Valasaravakkam, Chennai, Tamil Nadu

We are offering top mounted magnetic level switch. A top mounted magnetic level switch is normally a simple device that monitors the liquid level in a tank and sends a trip signal to another device such as a pump to protect it. These level switches are used for pump protection, cooling circuit protection, high & low level alarm and general level monitoring.

A Top Mounted Magnetic Level Switch is normally a simple device that monitors the liquid level in a tank and sends a trip signal to another device such as a Pump to protect it. These Level Switches are used for Pump protection, Cooling Circuit protection, high & low level alarm and general level monitoring.

Tubular Level Gauge for visual liquid level observation is very common in process industry. It is a simple and reliable device for direct reading in atmospheric or pressurized tank applications. It is mounted parallel, along the side of tank. As the process level fluctuates, the level in the transparent glass tube changes accordingly and gives local liquid indication.

A combination of Lexium 23 Servo Drive & BCH servo motor has been tailor made to meet various motion control applications. Lexium 23 is a Powerful Servo Drive, which can be used, either in standalone mode (with Digital IO Control), or with External Position Controller.

Modicon LMC058 Motion Controllers are destinated to the machine builders (OEMs) by offering performant solutions in terms of motion control for synchronized axis, speed control, high speed counting and communication networks. It has been designed in order to satisfy the market requirements in terms of simplicity of installation and evolution.

The new Magelis STO or STU boost the Magelis Small Panels range : more flexibility, more communication, easy and fast revolutionary mounting system Powered by Vijeo Designer, bring a cost-effective solution to all machines builders.

Item Code - Altivar12 Single phase drive of small machinesApplications . Small machines. Simple consumer machines. Mobile machines

• 0.3 to 48 Nm Torque Ratings, Available with Low, Medium & High Inertia Type Motors.

Accurate Control

• BCH servo motors are 3 phases synchronous motors.
• BCH motor are equipped with 2 ranges of high quality encoder.
• The Lexium 23C Series is compatible with 10, 000 Increment encoder; Lexium 23M is compatible with 20 bit encoder, allowing the Lexium 23M to be used on applications requiring high performance for material working, for example machine tools etc.

Benefits

A combination of Lexium 23 Servo Drive & BCH servo motor has been tailor made to meet various motion control applications

Lexium 23 is a Powerful Servo Drive, which can be used, either in standalone mode (with Digital I/O Control), or with External Position Controller.

Applications

• Material Handling.
• Assembly & Inspection machines.
• Printing & Packaging.
• Winding & Unwinding.
• Machine Tools.

The A series is the first product to prove equally good in regard to efficiency and versatility within a highly competitive context, both performance and price-wise.

The units of the RAN series are designed to fit the purposes of transmissions laid out in right angle setting. Easy to fit and almost maintenance-free, RAN units offer multiple shaft arrangements and a choice of several exact gear ratios, beside the 1:1, that come handy when designing synchronized drive systems. Also available in the version for screw jack duty.

Bharat Bijlee has been a pioneer in the field of standard & special electric motors.

Type 'MA' 0.12 KW (Frame 63) to 160 KW (Frame 315M).

We are offering flame proof motors. The bbl range of flame proof ex (d) type "md" motors are from 0.37 kw ( frame 80) to 90 kw ( frame 280m). Motors are also offered in multi speed and non standard outputs voltages frequencies. Flp energy efficient motors are also available.

BBL manufactures TEFC three phase DC Brake motors with Type MB. These motors are used for applications requiring positive and instantaneous braking. These motors are Fail safe, which means that the brake will be applied immediately in case the power supply fails or is switched off. These motors have a built in rectifier along with a varister for protecting the rectifier as well as the brake coil from voltage surges. The special brake liner used assures consistent braking torque as well as very little wear. This leads to almost maintenance free operation. These motors can be offered in various types of mounting. BBL manufactures these motors in frame sizes from 71 to 132M in 2, 4, 6 and 8 pole. Multi speed brake motors can also be supplied. Motors from 90S to 132M can also be supplied with a Manual release arrangement to manually release the brake.

BBL manufactures TEFC crane duty three phase Slip ring motors with Type MP. These motors are used for cranes requiring frequent start /stops and for speed control. Standard MP motors are designed for use for S3, S4 or S5 duty with various Cyclic duration factors. These motors can be offered in various types of mounting. BBL manufactures these motors in frame sizes from 100L to 160L in 6 pole with outputs from 1.1 kW to 10kW. 4 pole motors are made in frame 100L to 132M with outputs from 1.5kW to 7.5 kW.

Click here to download Manual

The BBL range of Flame proof Ex (d) Type "MD" motors are from 0.37 Kw ( Frame 80) to 90 Kw ( Frame 280M). Motors are also offered in multi speed and non standard outputs / voltages / frequencies. FLP energy efficient motors are also available.

These motors can be used in Zone 1 and Zone 2 areas as per IS 5572 and VDE 0165

When customers benefit from the know-how developed over the years

Top torque density, product variety, extremely wide speed choice, great compactness and price effectiveness make the C series the unparalleled line of helical gearmotors and speed reducers.

Compact, and yet extremely powerful, are the units of the 300 series. Their planetary drive train makes them the ideal choice for all the severe duty applications where shock loadings and impacts are more the rule than the exception. The product configuration is highly versatile, due to several options as far as the mounting, the gear layout, the output shaft and the motor interface. All the features are available for each of the 16 finely spaced frame sizes, spanning over the 1.000 450.000 Nm torque range. Finding the perfect match to any drive problem is therefore more than a wish, it is something users can safely rely on always.

Wormgears and motors are also available in the enhanced protection EP configuration, featuring food grade specifications and extra corrosion protection, allowing for cleanability and sanification after operation. Besides the food processing, the EP configuration will also suit the requirements of the chemical and pharmaceutical industry as well as the marine on-board and quayside installations.

Scientific Devices Turbine Flow Meters are useful for liquids & gases in general industrial application. They provide excellent performance with quality & reliability. Suitable for as hygienic application. The flowing media engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick -of coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal.

The electromagnetic flow meter accurately measures the flow rate of any conducting liquid or slurry that is flowing in closed pipes. It is obstruction less and hence offers no pressure drop in the process. Absence of moving parts ensures that there is no need for maintenance.

We are deal in various types of ac drive that are available at market leading prices.

Schneider electric is a leading manufatcurer and supplier of electric motor.

We offer the best and most competitive distribution of various gear boxes to meet with the requirements of its customers.

We are an eminent and leading manufacturer, supplier, trader and exporter of scientific instruments in india.

A sight Flow Indicator is a device which is inserted in a run of pipe to observe the flow of fluid in the pipe. To enhance the visibility of the flow, spinner is often incorporated in the flow stream so that fluid impinging on the spinner vanes cause it to turn.

The strainer is a filtering element incorporated in the pipe line. It is called a Y Type, Basket Type or T Type strainer because of its shape. Inside the strainer is a mesh, which blocks any suspended impurities that the fluid has and is collected in the mesh. During maintenance the mesh can be removed and cleaned of the impurities.