Our Products
Paper & Paper Products
2 Products availableAutomotive Cleaners
1 Products availableLubricants
1 Products availablePetrochemicals & Petroleum Products
1 Products availableHeaters, Thermostats & Heating Devices
1 Products availableOur Complete range of products are Thread Sealing Adhesive, High Impact Speed Bonder Adhesive, Flanges Sealant Adhesive, Chisel Gasket Remover and Low Modulus MS Sealant ADHESIVE.
We offer a comprehensive range of243 Thread Sealing, which is formulated for the locking and sealing of threaded fasteners between 1/4" and 3/4" (6 to 20 mm). This tip pick Loctite 243 Primer less, Oil Tolerant Removable Medium Strength Blue Thread locker is capable of working on both active metals like brass, copper and also on passive substrates such as stainless steel and plated surfaces. A recommended replacement for Loctite 2440, it has the property to tolerates minor surface contamination from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.
to the application. This high impact, toughened, two step acrylic, amber, multi-surface Loctite 324 Speed bonder structural adhesive offers the strength of an epoxy and the speed of an instant, fixture in 5 minutes. Solvent resistant, this adhesive when used with Loctite Primer 7075 becomes ideal for large gap applications.
ApplicationSourced from one of the well established manufacturers, Henkel, our range of574 Flanges Sealant Adhesiveis widely used for sealing close fitting joints between rigid metal faces and flanges. This kind of sealing is achieved due to their fast curing property. Sold under the brand Loctite, these 574 Flange Sealants provides resistance to low pressures immediately after assembly of flanges.
Applications | Gasketing > Formed In Place > Rigid Flange (Anaerobic and Polyacrylate) Gasketing > Industrial Gasketing Gasketing > Industrial Gasketing > Anaerobic |
Chemistry | (-)Acrylates (monomeric) |
Media Carrier | 100 % liquid & paste |
Cure Type | Anaerobic |
ESSRBOND MS 25 is a one component, Low Modulus, high performance sealant based on advance MS Polymer Technology. It is Solvent, Silicone and Isocyanates Free and Non-staining for natural stones applications. It has an excellent UV, weather and temperature resistance. It has excellent adhesion over a wide variety of substrates and is paintable with most common industrial paints. This sealant has been specifically formulated as a non staining sealant and for application to difficult substrates associated with modern facade construction.
ESSRBOND WPK 55 is a single component, solvent-free, high-build, liquid-applied waterproofing coating based on MS polymer technology that is designed to coat and protect roof and terrace of buildings. It cures as a result of a reaction with atmospheric moisture to form a tough, monolithic waterproof membrane.It is well suited for enclosed wet areas like bathroom as well as complex structures such as flashings, roof skylights, etc., which would normally require elaborate workmanship.
ESSRBOND PG 101 is a high performance, self leveling, chemical resistant, Polysulphide polymer based joint system. It is resistant to many chemicals, shrinkage, aging, thermal stress and the effects of outdoor exposure. It is highly resilient and has excellent recovery characteristic after extended period of compression or elongation.
ESSRBOND PP 110 is a one component low viscosity primer for porous surfaces to be used with ESSRBOND PG 101 and ESSRBOND GG 105.
Recommended uses : Concrete surface, Natural Stone, Bricks and stained timber frame, Glazed tiles (Unglazed edge)
ESSRBOND FR 501 is an advanced MS Polymer technology sealant that provides movement capability in fire rated joint applications. It's ideal for sealing application which requires both fire and acoustic ratings.
Specially formulated single-component, water-based, acrylic sealants used for firestop applications. It is effective in numerous UL systems for wall and floor through-penetrations and head-of-wall construction joint applications.
ESSRBOND NAIL FREE is a single component, instant grip, High Tack sealant based on advance Polymer Technology. The instant Grab Technology will eliminate the need for bracing, nailing, screwing & other fastening devices.