Pooja Switchgears

Gandhi Road, Ahmedabad, Gujarat

Micron Miniature Circuit Breaker (MCB) protects the low voltage electrical appliances and circuits which can be damaged due to overload or short circuit

Technical Information:

• Standard Conformity : IS/IEC 60898-1:2015
• Rated Current (In) : 6, 10, 16, 20, 25, 32, 40, 63 AMP 
• Rated Breaking Capacity : 10000A (10 kA) 
• Rated Voltage (Un) :415V AC 
• Rated Frequency : 50 Hz 
• Dielectric Strength : 2000 V for 1 Minute 
• Rated Insulation Voltage (Ui) : 660 V 
• Rated Impulse Voltage (Uimp) : 4 kV 
• Energy Limiting Class : Class 3 
• Ambient Temperature(°C ) : -5°C to 55°C 
• Degree of Protection : IP20 
• Tripping Mechanism : Thermal and Magnetic 
• Type Mounting : Snap on DIN rail at (35mm x 7.5mm) 
• Connecting Terminals : 25mm²

Micron Features

• Tested from ERDA in accordance with IS/IEC 60898-1 and are ISI marked.
• CE marking fulfils the requirement of Global Standard.
• Protection against Over Load and Short Circuit.
• Environment friendly, meets the ROHS compliance as defined by the European Standard
• Shock Proof: Finger and Hand touch safe.
• All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• A quick make and Break trip free mechanism.
• Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection.
• Better Arc Quenching values and Cooling system which ensure enhanced shot circuit performance.
• Positive Isolation.
• Suitable for Residential and Commercial applications.

Micron Miniature Circuit Breaker (MCB) protects the low voltage electrical appliances and circuits which can be damaged due to overload or short circuit

Technical Information:

• Standard Conformity : IS/IEC 60898-1:2015
• Rated Current (In) : 6, 10, 16, 20, 25, 32, 40, 63 AMP 
• Rated Breaking Capacity : 10000A (10 kA) 
• Rated Voltage (Un) :415V AC 
• Rated Frequency : 50 Hz 
• Dielectric Strength : 2000 V for 1 Minute 
• Rated Insulation Voltage (Ui) : 660 V 
• Rated Impulse Voltage (Uimp) : 4 kV 
• Energy Limiting Class : Class 3 
• Ambient Temperature(°C ) : -5°C to 55°C 
• Degree of Protection : IP20 
• Tripping Mechanism : Thermal and Magnetic 
• Type Mounting : Snap on DIN rail at (35mm x 7.5mm) 
• Connecting Terminals : 25mm²

Micron Features

• Tested from ERDA in accordance with IS/IEC 60898-1 and are ISI marked.
• CE marking fulfils the requirement of Global Standard.
• Protection against Over Load and Short Circuit.
• Environment friendly, meets the ROHS compliance as defined by the European Standard
• Shock Proof: Finger and Hand touch safe.
• All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• A quick make and Break trip free mechanism.
• Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection.
• Better Arc Quenching values and Cooling system which ensure enhanced shot circuit performance.
• Positive Isolation.
• Suitable for Residential and Commercial applications.

Micron Residential Current Circuit Breaker (RCCB) is a crucial current sensing safety system that protects electrical appliances

Technical Information:

• Standard Conformity : IS 12640-1 & IEC 61008-1
• Rated Current (In) : 16, 25, 32, 40, 63 AMP
• Breaking Capacity : 6000 A ( 6 KA)
• Rated Voltage (Un) :415V AC
• Sensitivity (lln) : 30ma, 100ma, 300ma
• Dielectric Strength : 2000 V for 1 Minute
• Rated Insulation Voltage (Ui) : 660 V
• Rated Impulse Voltage (Uimp) : 4 kV
• Energy Limiting Class : Class 3
• Ambient Temperature(C ) : -5 to 55
• Degree of Protection : IP20
• Mounting : Snap on DIN rail at (35mm x 7.5mm)
• Connecting Terminals : 35mm²

 Features:

• Tested in accordance with IS:12640-1 & IEC 61008-1 and are ISI marked
• CE marking fulfils the requirement of global standard
• Environment friendly, meets the ROHS compliance as defined by the European Standard. Shock Proof: Finger and Hand touch safe.
• All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• Trip quickly when earth fault/ leakage current occurs and prevent from electric shock Test button ‘T’ is provided for Regular Inspection
• Simple and Robust operating mechanism.
• Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection.
• Positive Isolation.
• Suitable for Residential & Commercial applications

Micron distribution board is vital for any commercial and residential entity when supplying electricity to the whole property. The cable from the main comes to the distribution board, and in the distribution board, it gets distributed via breakers and transferred to secondary circuits such as lights and plugs. To maintain your devices' optimal performance, you need to have proper power distribution both indoors and outdoors. Micron distribution board isn't just an enclosure. It in-houses an overall system that comes with neutral links along with an earth leakage unit. It has interconnecting wires that serve the purpose of proper electrical distribution. Micron double door distribution board can be used for heavy-duty distribution tasks. The distribution boards have an aesthetic design and are user friendly

Features

• Conformity to IEC 61439/IS:13032 & IS:8623
• Premium quality power coating with Mat finish.
• DB’s are made of special CRCA sheet for strength and finish.
• These DB’s undergo a Seven-Tank Phosphating process to ensure anti rust conditioning, superior finish and lasting strength.
• Compact DB’s which occupy minimum space.
• Removable top & bottom gland plate with knock out.
• Provided with neutral link, earth link and insulated busbar.
• Plastic and Sheet Steel Enclosures for independent cut off / connection of the electrical appliances.
• IP Protection – IP20/42.
• Suitable for surface and flush mounting.
• Suitable for MCB’s/Isolator/RCCB as incoming and SP as outgoing.

The Micron DC MCBs is a protective device equipped with thermal & electromagnetic release for circuit protection against overload & short-circuit current in DC distribution system equipment and electric equipment. Devices are designed for direct current (DC) applications mainly Solar PV & others like Electric Vehicles, Charging Stations, Battery Storage and UPS Systems.

Technical Information:

• Standard conformity : IS/IEC 60898:2/ 60947:2
• Rated Current (In) : 6, 10, 16, 20, 25, 32, 40 & 63 AMP
• Rated Breaking Capacity (ICU) : 6000A (6 kA)
• Rated Voltage (Un) : 1P: 250V, 2P: 500V & 4P: 1000V
• No of Poles : 1, 2 & 4
• Rated Insulation Voltage (Ui) : 500 V
• Rated Impulse Voltage (Uimp) : 4 kV
• Energy Limiting Class : Class 3
• Ambient Temperature (C) : -5 to 55
• Degree of Protection : IP20
• Trip Type : Thermal and Magnetic 
• Installation Category : Class III 
• Mounting : Snap on Din rail at (35mm x 7.5mm)
• Connecting Terminals : Box Type/35mm²
• ON-OFF Indication : Positive Indication as ON (RED) & OFF (GREEN)
• Connections : Dual Connection Level (Bus Bar + Cable)

Features: 

• CE marking fulfils the requirement of Global Standard.
• Protection the PV Module from dangerous high DC back current.
• Applicate in direct current circuit like Motor, auxiliary circuit and photovoltaic.
• Environment friendly, meets the ROHS compliance as defined by the European Standard. Shock Proof: Finger and Hand touch safe.
• Housing & Cover made from Flame Retardant Material ensures protection against heating and strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• A quick make & Break trip free mechanism.
• Positive Isolation.
• Suitable for Commercial, Industrial , Residential & New Energy.
• Install before invertor to protect Solar Panel in case of high surge current.

Micron Residential Current Circuit Breaker (RCCB) is a crucial current sensing safety system that protects electrical appliances

Technical Information:

• Standard Conformity : IS 12640-1 & IEC 61008-1
• Rated Current (In) : 16, 25, 32, 40, 63 AMP
• Breaking Capacity : 6000 A ( 6 KA)
• Rated Voltage (Un) : 240V AC
• Sensitivity (lln) : 30ma, 100ma, 300ma
• Dielectric Strength : 2000 V for 1 Minute
• Rated Insulation Voltage (Ui) : 660 V
• Rated Impulse Voltage (Uimp) : 4 kV
• Energy Limiting Class : Class 3
• Ambient Temperature(C ) : -5 to 55
• Degree of Protection : IP20
• Mounting : Snap on DIN rail at (35mm x 7.5mm)
• Connecting Terminals : 35mm²

 Features

• Tested in accordance with IS:12640-1 & IEC 61008-1 and are ISI marked
• CE marking fulfils the requirement of global standard
• Environment friendly, meets the ROHS compliance as defined by the European Standard. Shock Proof: Finger and Hand touch safe.
• All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.
• Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving.
• Trip quickly when earth fault/ leakage current occurs and prevent from electric shock Test button ‘T’ is provided for Regular Inspection
• Simple and Robust operating mechanism.
• Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection.
• Positive Isolation.
• Suitable for Residential & Commercial applications

Micron Mini Changeover Switch is used for switching to an alternate source of supply from the main supply.It is made from first resistant engineering plastic ensuring safety against heating and strong impact.Compact design makes it suitable for use in low voltage distribution circuit

Technical Information:

• Standard Conformity : IS/IEC 60947-3
• Rated Current (In) : 40, 63 AMP
• Rated Voltage (Un) : 415V AC
• Rated Frequency : 50 Hz
• Dielectric Strength : 2000 V for 1 Minute
• Rated Insulation Voltage (Ui) : 660 V
• Rated Impulse Voltage (Uimp) : 4 kV
• Energy Limiting Class : Class 3
• Ambient Temperature(C ) : -5 to 55
• Degree of Protection : IP20
• Mounting : Snap on DIN rail at (35mm x 7.5mm)

Features: » Manually operated changeover switching to an alternate supply of source from main supply.» CE marking fulfils the requirement of Global Standard.» Environment friendly, meets the ROHS compliance as defined by the European Standard.» All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.» Compact Design suitable for use in low voltage Distribution Circuit.» Silver cadmium oxide contact tips. » Double Break contact.» Shrouded terminals.» Front operation with state position I-O-II - Mid position off.» Can be mounted with other products like MCB/RCCB/Isolators in Distribution Board.» Suitable for Residential & Commercial applications

Micron Mini Changeover Switch is used for switching to an alternate source of supply from the main supply.It is made from first resistant engineering plastic ensuring safety against heating and strong impact.Compact design makes it suitable for use in low voltage distribution circuit

Technical Information:

• Standard Conformity : IS/IEC 60947-3
• Rated Current (In) : 40, 63 AMP
• Rated Voltage (Un) : 240V AC
• Rated Frequency : 50 Hz
• Dielectric Strength : 2000 V for 1 Minute
• Rated Insulation Voltage (Ui) : 660 V
• Rated Impulse Voltage (Uimp) : 4 kV
• Energy Limiting Class : Class 3
• Ambient Temperature(C ) : -5 to 55
• Degree of Protection : IP20
• Mounting : Snap on DIN rail at (35mm x 7.5mm)

Features: » Manually operated changeover switching to an alternate supply of source from main supply.» CE marking fulfils the requirement of Global Standard.» Environment friendly, meets the ROHS compliance as defined by the European Standard.» All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.» Compact Design suitable for use in low voltage Distribution Circuit.» Silver cadmium oxide contact tips. » Double Break contact.» Shrouded terminals.» Front operation with state position I-O-II - Mid position off.» Can be mounted with other products like MCB/RCCB/Isolators in Distribution Board.» Suitable for Residential & Commercial applications

Technical Information:

• Standard Conformity to IEC 62640, C-Curve, 240V AC , 50HZ, Breaking Capacity 3kA.
• A quick make & break trip free mechanism
• Over load & short circuit protection
• Easy to operate & replace
• IP 20 protection
• Shock proof, Compact & Elegant design with indicator
• Enclosures are made of engineering plastic Poly Carbonate

The Micron DC MCBs is a protective device equipped with thermal & electromagnetic release for overload & short circuit protection.Devices are designed for direct current (DC) applications like E-Rickshaw, Solar PV, Electric Vehicles, Charging Stations, Battery Storage and UPS Systems.

Technical Information:

• Standard conformity : IS 60898:2/ IEC 60947-2, ROHS
• Rated Current (In) : 6, 10, 16, 20, 25, 32, 40 & 63 AMP
• Rated Breaking Capacity (ICU) : 10KA / 6KA
• Rated Voltage (Un) : 24V, 48V, 96V, 120V, 240V DC
• No. of Poles : SP, DP, TP & FP
• Rated Insulation Voltage (Ui) : 660 V
• Rated Impulse Voltage (Uimp) : 4 kV
• Energy Limiting Class : Class 3
• Ambient Temperature (C) : -5 to 55
• Degree of Protection : IP20
• Trip Type : Thermal and Magnetic
• Installation Category : Class III
• Mounting : Snap on DIN rail at (35mm x 7.5mm)

Features: 

• CE marking fulfils the requirement of Global Standard.
• Applicate in direct current Specially designed for E-Rickshaw for the safety of battery, controller, motor, auxiliary circuit and photovoltaic from dangerous High DC Current
• Environment friendly, meets the ROHS compliance as defined by the European Standard. Shock Proof: Finger and Hand touch safe.
• Housing & Cover made from Flame Retardant Material ensures protection against heating and strong impact.
• The contacts are made of high grade material silver inlay copper
• A quick make & Break trip free mechanism.
• Suitable for Isolation.

Micron distribution board is vital for any commercial and residential entity when supplying electricity to the whole property. The cable from the main comes to the distribution board, and in the distribution board, it gets distributed via breakers and transferred to secondary circuits such as lights and plugs. To maintain your devices' optimal performance, you need to have proper power distribution both indoors and outdoors. Micron distribution board isn't just an enclosure. It in-houses an overall system that comes with neutral links along with an earth leakage unit. It has interconnecting wires that serve the purpose of proper electrical distribution. Micron double door distribution board can be used for heavy-duty distribution tasks. The distribution boards have an aesthetic design and are user friendly

Features

• Conformity to IEC 61439/IS:13032 & IS:8623
• Premium quality power coating with Mat finish.
• DB’s are made of special CRCA sheet for strength and finish.
• These DB’s undergo a Seven-Tank Phosphating process to ensure anti rust conditioning, superior finish and lasting strength.
• Compact DB’s which occupy minimum space.
• Removable top & bottom gland plate with knock out.
• Provided with neutral link, earth link and insulated busbar.
• Plastic and Sheet Steel Enclosures for independent cut off / connection of the electrical appliances.
• IP Protection – IP20/42.
• Suitable for surface and flush mounting.
• Suitable for MCB’s/Isolator/RCCB as incoming and SP as outgoing.

We are engaged in making available high-quality LED Bulbs of different Watts with CE Certified. We are one of the most trusted links between the manufacturer and the market of LED Bulbs. Our efficiency lies in the fact that we supply these Bulbs all over the country in time and safely. We are often called as the eminent Supplier of LED Bulbs in Ahmedabad, Gujarat. We offer the LED Bulbs of 3, 5, 7, and 10 Watts.

Features :

• Suitable for replacement of Incandescent lamps and cfl.

• Compact size, 100% Retrofit for existing fitting.

• Consumes upto 90% less electricity than incandescent bulb and upto 60% than CFL

• Elegant design

• As per IS : 16102 (Part - 1 and 2 ) / IEC 62560 and 62612.

• Green and environment protection without UV, IR, thermal radiation and mercury pollution

We bring high-quality Miniature Circuit Breaker (MCB's) for the market across the country. We are counted among the preeminent Suppliers of Miniature Circuit Breaker (MCB's) in Ahmedabad, Gujarat. We have a range of MCBs, which includes SP, DP, SPN, TP, TPN, and FP. Each MCB is CE certified, thereby, warranting its quality. 

The switch is provided with shunt trip coil incorporated in series with the fixed & moving contact. The two leads are taken out for application of tripping voltage to the coil. For tripping voltage is applied across the coil via leads. Once the coil will become inoperative due to its inherent features & hence coil will be safe even if the tripping voltage is applied for more time to continuously.

Features :

• State-of-the-art design
• MCSs are completely type tested in accordance with IS/IEC 60898-1 and ISI marked.
• CE marking fulfils the requirement of global standard.
• Shock Proof: Finger and hand touch safe.
• Protection against electric shock.
• The housing of MCS is moulded from special grade PST
• Fire resistant plastic parts ensure protection against heating and strong impact.
• Contacts are made of special silver inlaid copper, ensuring higher life and maximum safety
• against contact welding and Low temperature rise.
• Low Watt Loss
• A quick make & break trip free mechanism.
• Short Circuit Protection
• Over load Protection
• Dual Position Clip.

Power-saving attribute and elegant design set our LED Panel Downlights apart. We are emerging as the promising Supplier of LED Panel Downlights in Ahmedabad, Gujarat. We have tie-ups with eminent manufacturers, who produce these Downlights in compliance with the international standards of quality. We make them available all over the country in time. Place the order for LED Panel Downlights at competitive prices with us!

Features

• Top quality aluminum die cast with better heat dissipation
• clip in action for easy installation
• Consumes upto 90% less electricity than incandescent bulb and uptro 60% than CFL
• Green and enviroment protection without UV, IR and mercury pollution
• As per IS:16102 (part-1 and 2) / IEC 62560 and 62610
• Ling life IC base Curcuit
• Elegnt design
• Available in Round & Square Shape

We cater for the market across the country with our premium Distribution Board Enclosure. We are standing amid the most preferred Suppliers of Distribution Board Enclosure in Ahmedabad, Gujarat. This equipment is fabricated in accordance with the IS 13032 and IS 8623-3 standards.

We are working in full throttle to make sufficiently available premium LED COB Downlights throughout the country. We are backed by well-spread network across the country, which adds to our fluidity and swiftness. We are identified as the main Supplier of LED COB Downlights in Ahmedabad, Gujarat. We offer Downlights of 5, 12, and 20 Watts. To avail the deal at affordable rates, contact us!

Features

• Top quality aluminum die cast with better heat dissipation.
• Graceful model and perfect in workmanship.
• Consumes upto 90% less electricity than incandescent bulb and upto 60% than CFL.
• Green and environment protection without UV, IR, thermal radiation and mercury pollution.
• As per IS: 16102(part- 1 and 2 ) / IEC 62560 and 62612.
• Long life IC base Curcuit.
• Available  only in clear glass

Our MCCBs are absolutely compliant with the IS/IEC 60947-2 standards. We procure them from reliable manufacturers and serve the country with these best-in-class Moulded Case Circuit Breaker (MCCB). We are an authorized Supplier of Moulded Case Circuit Breaker (MCCB) in Ahmedabad, Gujarat. We are appreciated for delivering foolproof and quality assured products and that too in time. Buy them at best prices from us!

Features

• Compact Size in Selected rating.

• Four Pole Version available with neutral fully protected

• Push to trip button provision.

• Suitable for use as switch disconnected provide overload & short circuit protection.

• Available in both fixed & adjustable magnetic settings

• Adjustability - Offers close protection to different load condition.

• Low let through energy

• Available of motor driven operation mechanism

• Line load reversibility

• Positive isolation

• High repeat accuracy - reliable protection

• Available with wide range of accessories.

• Available in enclosed version