Advanced Digital Force Gauges

Power AC or rechargeable battery. Multi-step low battery indicator is displayed
Accuracy ±0.2% of full scale
Sampling rate 3, 000 Hz
Battery Life Backlight on
Backlight off up to 24 hours of continuous use
Measurement units lbF, ozF, gF, kgF, N, kN, mN (depending on model)
Outputs USB / RS-232
Mitutoyo (Digimatic) Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog ±1 VDC, ±0.25% of full scale at capacity,
General purpose Three open drain outputs, one input.
Set points Three open drain lines.
Safe overload 150% of full scale (display shows “OVER” at 110% and above)

Series 4 digital force gaugesare designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 500 lb (0.5 N to 2500 N). The gauges feature a sampling rate of 3, 000 Hz, producing accurate results under a wide range of test conditions. Accuracy is 0.2% of full scale, and resolution is 1/2000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.
On-board data memory for up to 50 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force.
An ergonomic, reversible aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 4 digital force gauges are directly compatible with Mark-10 test stands, grips, and software. Series 5 force gauges are directly compatible with Mark-10 test stands, grips, and software.
The gauges include MESUR Lite data acquisition software. MESUR Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.

Features

High-speed 3, 000 Hz sampling rate
USB, RS-232, Mitutoyo, and analog outputs
Large backlit graphic display
50-point data memory with statistics (min, max, mean, standard deviation) and outputs
Live load bar graph with set point markers
Programmable set points, with alarms and outputs
Peak readings and set points always displayed
5 selectable units of measurement
Configurable audio alarms and key tones
Password protection, configurable for individual keys and calibration

Additional Information:

Payment Terms : T/T

Delivery Time : 7-8 Week

View Complete Details

Ask Latest Price & Details

Ultrasonic Thickness Gauge

Ultrasonic Thickness Gauge NOVOTEST UT-1
Ultrasonic Thickness Gauge NOVOTEST UT-1 is designed for rapid non-destructive thickness testing of:

products made of various metals, alloys and other materials;
glass, plastic, composite and other products from non-metallic materials;
the walls of the tanks, pipes, casing parts, sheets, overhead, and other structures, including the corroded surfaces, pitted, with scum, etc.;
products during their production and operation;
metal products for diagnostic and expert work with one-side access to the tested object.

Ultrasonic method for measuring thicknessUltrasonic Thickness Gauge NOVOTEST UT-1 operates on the principle of measuring the propagation time of ultrasound in the product. The pulse generator produces a high frequency electrical pulses that excite the piezoelectric transducer (Probe). At the same transducer are converted electrical signals into the elastic (mechanical) vibrations sound waves. These waves propagate from the surface of the input to the reflective (bottom) surface, re-taken and converted into electrical signal by means of PET. After that device calculates the thickness of tested object.

Advantages

Wide range of measuring thicknesses
Convenience and ease in operation
Minimum number of controls
Select the type of probe through single button
Preset velocity of ultrasound

View Complete Details

Ask Latest Price & Details

Precision Spotcheker

The SC1000 measures the thickness and basis weight of plastic film and other non conductive materials such as nonwovens, paper and ceramic tape.
This non contacting micrometer utilizes SolveTechs proprietary capacitance based technology. It allows for higher precision than a contact measurement, and it is great for material that are easily damaged or deform.

Key Features Include:

Accurate to +/- 0.001 mils
Easy to Operate
Reliable and Repeatable
Records Data with the Click of a Foot Pedal
Easily Exports Data to Excel
NIST Traceable Calibration

Great for the lab or the production floor for quickly profiling you material or checking the gauge of you material.

View Complete Details

Ask Latest Price & Details

Multichanneltm Array Gauge

ON LINE THICKNESS GAUGING SYSTEM

The MultiChannel Array Gauge from SolveTech is used to measure the thickness of plastic film and other non conductive materials on the production line. It accurately delivers a crossweb profile with high precision in real time. Unlike a typical scanning gauge, the MultiChannel has multiple measurement sensing zones that cover the web continuously.
The result is a unique offering to the market that has made it the highest performance unit for webs under 60 inches wide. The video below shows a MultiChannel running on a simulated plastic film while continuously running on 19 different channels.

FEATURES

FAST DATA COLLECTION
The MultichannelTM Array Gauge provides extremely fast response, allowing it to sense even brief, transient web variations. Having an array of channels make true profile and product mapping available for the first time.

ACCURATE AND RELIABLE
Quick response features combined with proprietary Measurement Head design allow the MultichannelTM Array Gauge to provide 100% continuous coverage with excellent accuracy. Accuracies typically range between 0.1% and 1%, depending on the application.

REAL-TIME 3D WEB VIEWS
The MultichannelTM Array Gauge provides multiple fixed points across the web. The measurement areas are usually contiguous and provide complete coverage with no scanning. The high frequency response allows complete data on your web.

RADIATION-FREE
Our dielectric-based technology means fast, accurate measurements without the environmental or regulatory concerns associated with nuclear gauges.

COVERAGE
The MultichannelTM Array Gauge employs a C frame design that can measure web widths up to 60 using two heads. Array elements are contiguous, thereby providing total coverage.

FEATURES INCLUDE:

Non-scanning, 100% continuous coverage
Multiple contiguous zones within one unit
Non-contact
No moving parts
C-Frame head styles up to 30
Easy to read display
Software package for process set-up, monitoring, trouble-shooting/studies, and QC
Menu-driven setup
Rear panel analog output

SYSTEM INCLUDES:

Model CLC Series non-contact, nuclear-free Measurement Head
Gauge Control Unit
MC5600-PC Software package
Associated power cord and cables

View Complete Details

Ask Latest Price & Details

Blown Film Gauge

The BF200 Blown Film Gauge is used to measure blown film thickness accurately on the production line. It measures blown film with market leading precision and consistently holds calibration to deliver an accurate measurement even on the thinnest films. It is also designed to be easy to use and durable in the sometimes harsh and dirty environments.
It is a great alternative to on-the-bubble gauging systems due to its lower cost and ability to give an absolute measurement.

THE ADD-ON GAUGE THAT ADDS ON PROFITS

Reduce Scrap
Improve Quality
Enhance Training
Increase Productivity
Predictive Cleaning and Maintenance

SIGNIFICANT OPERATIONAL IMPROVEMENTSAutomatically provides full thickness information for operators, process engineers, and quality control personnel.

EXCLUSIVE FEATURES:

Provides a stable and reliable thickness measurement
Totally non-invasive wont disturb bubble and wont mark film.
Comprehensive, easy-to-use BF200-PC Software package
High reliability, trouble-free design
Non-nuclear, Proprietary Capacitance Gauging Technology
Continuous gauge profile feedback
User-friendly, NIST Traceable calibration
Simple installation
Great for measuring thin films

ON-TARGET BLOWN FILMThe blown film process has many variables that affect film thickness. This complexity puts a large burden on the operator as he tries to achieve on-target thickness. SolveTechs breakthrough technology has opened the door to significant improvements in your production. The BF200 Blown Film Gauging System is an affordable tool that combines reliable thickness readings with simple, trouble-free performance.

ENHANCE EXISTING EQUIPMENTAdding a BF200 Blown Film Gauging System to an existing extruder is a good way to get the most out of your equipment. It will help you generate significant savings in time and material. Catch upsets or drifts that may occur and get operator feedback that enables quicker set-ups. This proves to be a cost-effective way to improve quality and reduce scrap.

RETURN ON INVESTMENT

Improve yield and reduce waste
Improve product quality
Improve customer confidence and gain new business

BF200 STANDARD SYSTEM INCLUDES:BF200 Measurement Head: Non-invasive and non-nuclear. This precision head wont disturb bubble or mark film. No worries about interfering with product or process. Provides outstanding reliability.BF200 Gauge Control Unit: Provides power and signal conditioning for the Measurement Head, as well as secondary displays and controls for the operator.PC-Compatible Gaugeware Software Package: Provides all of your thickness information needs. Includes information for process set-up, process monitoring, process troubleshooting/studies, and QC on a per roll basis (computer not included). This program is easy to use, yet offers tools to satisfy the most demanding user. Roll reports and printable screens give you the ability to show your customer the quality of each roll you produce for them.Head Positioning System: Automatically positions the Measurement Head along the edge of the film. Periodically provides automatic re-standardization (auto-zero) of system

SYSTEM OPTIONSCustomize your BF200 with options such as Feedback Control, Encoder, or Analog Output. We are willing to work with you to make a system that fits your blown film gauging needs.

View Complete Details

Ask Latest Price & Details

Machine Direction Gauging System

This measurement system is dedicated to downweb quality and diagnostics. Monitor and characterize, study and diagnose. Flat out excellence make it yours.
SolveTechs Machine Direction Gauging System utilizes the latest in capacitive measurement head design to provide you with critical measurement data in the down web direction. The information from this system can be used ot make process improvements, provide Machine Direction process monitoring, as well as help in predictive maintenance.

SYSTEM INCLUDES:

CL Series Measurement Head: Provides a thickness reading of the web, in from the edge, past any edge effects. The heads capacitance-based technology means unbeatable speed, unmatched precision and non the worries associated with nuclear gauge technology. Your choice of measurement head give you flexibility in building your system. You can specify head sizes and measurement patterns.
Gauge Control Unit: Provides plug-and-play simplicity to the system.
FX2100/MD Software Package: Analysis (max/min, mean, standard deviation, histogram), Set-up (menu-driven with Save and Restore for all set-up parameters), and Excel-compatible data files. Computer not included.
Associated cables and power cords

View Complete Details

Ask Latest Price & Details

Economical Force Gauges

The Series MG Digital Force Gauge is an economical solution for push and pull testing of up to 500 lb. A rugged reversible aluminum housing allows for hand-held use or test stand mounting. Three pushbuttons allow the user to easily select units of measurement, reset zero, and recall tensile and compressive peak loads. Use the MG with a test stand and gripping fixtures to create a complete testing solution.

Features :

Compatible with all Mark-10 test stands and grips.
Small size
Reversible aluminum housing for hand use or stand mounting
Peak memory for tensile and compressive loads
Programmable automatic shutoff
Programmable default configuration
Push-button calibration
IPM - Intelligent Power Management system
Selectable units of measurement
Battery or AC operation
Same housing size for all capacities
Accuracy: 0.5% of full scale 1 digit
Safe overload: 150% of capacity
Battery life: 30 hours of continuous operation
Weight: 0.7 lbs (0.3 kg)
Environmental requirements: 40F - 100F [5C - 45C],

View Complete Details

Ask Latest Price & Details

Economical Digital Force Gauges

Power AC or 9V non-rechargeable battery, with multi-step low battery indicator
Accuracy ±0.5% of full scale
Sampling rate 500 Hz
Battery Life Backlight on
Backlight off up to 92 hours
Measurement units lbF, kgF, N
Safe overload 150% of full scale (display shows “OVER”

Series 2 digital force gauges are designed for basic tension and compression force testing applications up to 500 lbF (2, 500 N). Peak tension and compression readings are reliably captured via the gauges' 0.5% accuracy and 500 Hz sampling rate. A backlit graphic LCD displays the current, peak tension, or peak compression reading.
The gauges are overload protected to 150% of capacity. An ergonomic, reversible aluminum housing allows for hand held use or fixture mounting, rugged enough for applications in both production and laboratory environments. Series 2 gauges are directly compatible with Mark-10 test stands and grips.

Features :

Calculates peak tension and compression values
3 selectable units of measurement
Ultra-compact, ergonomic housing
Configurable default measurement unit and mode
500 Hz sampling rate
Large, backlit graphic display with auto-dimming
Powered by 9V battery or available AC adapter
Reversible housing for alternate load cell orientation

View Complete Details

Ask Latest Price & Details

Digital Force Gauges

Power AC or rechargeable battery. Multi-step low battery indicator is displayed,
Accuracy ±0.3% of full scale
Sampling rate 2, 000 Hz
Battery Life Backlight on
Backlight off up to 24 hours of continuous use
Measurement units lbF, gF, kgF, N (depending on model)
USB Outputs Configurable up to 115, 200 baud.
Safe overload 150% of full scale (display shows “OVER” at 110% and above)

Series 3 digital force gaugesare designed for tension and compression force testing in numerous applications from 0.12 lbF to 500 lbF (0.5 N to 2500 N). The gauges feature a sampling rate of 2, 000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges features and configurable parameters. USB output is provided for data collection purposes.
Set point indicators are provided for pass-fail testing. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force.
An ergonomic, reversible aluminum housing allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 3 digital force gauges are directly compatible with Mark-10 test stands, grips, and software.
The gauges include MESUR Lite data acquisition software. MESUR Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.

Features :

High-speed 2, 000 Hz sampling rate
USB data output of continuous or individual data points
Ultra-compact size
Large backlit graphic display
Programmable set points with pass/fail indicators
Live load bar graph with set point markers
Peak readings and set points always displayed
3 selectable units of measurement
Configurable audio alarms and key tones

View Complete Details

Ask Latest Price & Details

Digital Torque Gauges

Accuracy ±0.5% of full scale
Sampling rate 2, 000 Hz
Power AC or rechargeable battery. Multi-step low battery indicator is displayed
Battery Life Backlight on
Backlight off up to 24 hours of continuous use
Measurement units lbFin, ozFin, kgFmm, Ncm (depending on model)
USB Output Configurable to 115, 200 baud
Safe overload 150% of full scale (display shows “OVER” at 110% and above)
Weight 1.8 lb [0.8 kg]

TT03 digital torque gauges are designed for clockwise and counter-clockwise torque testing applications in virtually every industry, with capacities from 10 ozFin to 100 lbFin (7 to 1, 150 Ncm). A dedicated remote torque sensor with Jacobs chuck can be used to grip a sample, bit, or fixture. The gauges rugged aluminum housing allows for hand-held use or test stand mounting for more sophisticated testing requirements.

Series TT03 features a sampling rate of 2, 000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges features and configurable parameters. USB output is provided for data collection purposes.

Set point indicators are provided for pass-fail testing. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force.

The gauges include MESUR Lite data acquisition software, for tabulation of continuous or individual data points. One-click export to Excel allows for further data manipulation.

Features :

Ergonomic torque sensor with Jacobs chuck
Peak torque values saved and displayed
High-speed 2, 000 Hz sampling rate
USB data output of continuous or individual data points
Programmable set points with pass/fail indicators
Live load bar graphs with set point markers
Peak memory for clockwise and counter clockwise readings
Set points always displayed
Configurable audio alarms and key tones
MESUR Lite data collection software included
Battery or AC operation
Safe overload: 150% of capacity
CE mark

View Complete Details

Ask Latest Price & Details

Professional Digital Force Gauges

Accuracy ±0.1% of full scale
Sampling rate 14, 000 Hz
Power AC or rechargeable battery. Multi-step low battery indicator is displayed
Battery Life Backlight on
Backlight off up to 24 hours of continuous use
Measurement units lbF, ozF, gF, kgF, N, kN, mN (depending on model)
Outputs USB / RS-232
Mitutoyo (Digimatic) Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog ±1 VDC, ±0.25% of full scale at capacity,
General purpose Three open drain outputs, one input.
Set points Three open drain lines.
Safe overload 150% of full scale (display shows “OVER” at 110% and above)

Series 7 professional digital force gaugesare designed with a number of sophisticated features for the most demanding tension and compression measurement applications, up to 500 lbF (2500 N). The gauges feature 0.1% accuracy and a blazingly fast, industry-leading sampling rate of 14, 000 Hz, producing reliable results for extremely quick-action tests.
Series 7 gauges include all the functions of Series 5 gauges, with several additional features, including high speed continuous data capture and storage, with memory for up to 5, 000 readings, at an acquisition rate of up to 14, 000 Hz. The gauges also feature programmable footswitch sequencing, break detection, and 1st / 2nd peak detection. Series 7 includes a coefficient of friction unit of measurement and user-defined unit of measurement. For productivity enhancement, the gauges also feature automatic data output, data storage, and zeroing functions upon the completion of break detection, averaging, external trigger, and 1st / 2nd peak detection.
Series 7 force gauges are directly compatible with Mark-10 test stands, including the ESM303, to permit functions such as break testing, tensile testing, compression testing, dynamic load holding, PC control capability, and many other applications.
The gauges include MESUR Lite data acquisition software. MESUR Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.

Features:

High-speed 14, 000 Hz sampling rate
Continous data capture of up to 5, 000 data points, at up to 14, 000 Hz, downloadable to a PC
Individual data point memory for up to 5, 000 data points, downloadable to a PC
USB, RS-232, Mitutoyo, and analog outputs
Sample break detection with auto functions, including stopping movement on the ESM303 test stand
1st / 2nd peak detection
Automatic output / data storage / zeroing upon various event completions
5 units of measurement, plus Coefficient of Friction, and user-defined unit with configurable name
Programmable footswitch command string
Programmable set points, with indicators and outputs
Averaging mode - calculates average readings over time
External trigger mode - for switch contact testing or remotely stopping display update
Password protection, configurable for individual keys and calibration

Additional Information:

Payment Terms : T/T

Delivery Time : 7-8 Week

View Complete Details

Ask Latest Price & Details

Coating Thickness Gauge

Coating Thickness Gauge NOVOTEST TP-1
Portable Coating Thickness Gauge NOVOTEST TP-1 device for operative non-destructive testing of coating thickness with high measurement accuracy.Coating thickness gauge is designed to test:

thickness of various thick protective coatings on various metals and alloys;
thickness of paint and other dielectrics radioabsorbing, mastic, teflon, plastic, electroplating coatings on steel;
thickness of electroplating and paint coatings on non-ferromagnetic alloys and non-ferrous metals;
thickness of bitumen and other thick coatings on various metals and alloys;
as well as relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures, estimate the depth of grooves and the surface roughness

Electronic thickness gauge device which widely used in shipbuilding and automotive industries for measuring the thickness of paint, in order to test the quality of products, also it used for determining technical condition of the tested objects.

Advantages

Large thickness measurement range
Convenience and ease in operation
Minimum number of controls: one button one function
Graphical display with backlight
Automatic recognition of probe
Indication of the connected probe type
Control of batteries

View Complete Details

Ask Latest Price & Details

Polytech Instruments Pvt.Ltd.
Ghodbunder Road, Thane, Maharashtra

Measurement Gauges & Fittings

Advanced Digital Force Gauges

Ultrasonic Thickness Gauge

Precision Spotcheker

Multichanneltm Array Gauge

Blown Film Gauge

Machine Direction Gauging System

Economical Force Gauges

Economical Digital Force Gauges

Digital Force Gauges

Digital Torque Gauges

Professional Digital Force Gauges

Coating Thickness Gauge

Contact Us

Polytech Instruments Pvt.Ltd. Ghodbunder Road, Thane, Maharashtra

Measurement Gauges & Fittings

Advanced Digital Force Gauges

Ultrasonic Thickness Gauge

Precision Spotcheker

Multichanneltm Array Gauge

Blown Film Gauge

Machine Direction Gauging System

Economical Force Gauges

Economical Digital Force Gauges

Digital Force Gauges

Digital Torque Gauges

Professional Digital Force Gauges

Coating Thickness Gauge

Contact Us

Polytech Instruments Pvt.Ltd.
Ghodbunder Road, Thane, Maharashtra