The Digital( also analogue) Bursting strength Tester is suitable for finding the stregth paper ad card board boxes normally used in packaging. The  Digital contaoller have a unique featere of after bursting tester will automaticlly returned to original position to restart. It very easy to opearate and dont need manual interfearence .

Digital diplay have selection facility of differnt units lik Kg/cm, PSI . etc. 

Eaast changable Rubber diaphrem and Hydro-Fluid (Glyscerine) uping are easy and provision given, so for future maintenence easy and can done by your techniciain itself.

Italian make Pressure sensor gives accurate result and long lasting.

Please contact polyplasteqp@gamil.com/ 022 25617126  

The vibration testes available as per different standard, ASTM d999, is tp28, IEC, difece, Naval. vertical, horizontal, Sinisuidal r available. The picture is if Sinisuidal, 650x650, 900 x900 at are common, also make digital display of data including g value & software available optionally.

We POLYPLAST equipment and accessores, make  different testers incluidng HDT VSP used in polymer and other industries. The  Heat deflection point  is find our with temperature riced in a set rate and xample /when the polymer /specimen kept under load on 3 point position on medium normally silicon oil deforms  on specific temperature the Digital gauge will show displacement and temperature to be notice. The Load. temperature increment rate are programmable amd cooling facility also provide. 

VSP also in similar nature and the pointer will penertrate in specimen under test medium ( silicon oil) and will show displacement and temperature to be noted. There are sinle , multiple station and cooling facility optional feature includig software faciltiy are there .  Pls contact polyplasteqp@gmail.com / +91 22 25617126/ +91 9821618727

Vidoe link : 

POLYPLAST make Torque Tester for find Bottle container's opening and closing torque find , it can keep specimen size up to 180dia from 20mm. The Reading in Nm/Kg./cm reading will get directly for both clossing and opening.  The Tester is made of study allloye steal with aluminimum blocks for holding bottles studly, the easy adjustable mechnanism grip/holdss thespecimen firmly. The canedian transduces high acuracy & unifirmity is best in class will collect the Torque( 5Nm & 10Nm max normally) with  The digital indicator will show current and Peak reading with 2 decimels.   

we do make customerisation fo this product depends on requirement. Polyplast Mumbai do make diffent type of Testers including for package worthiness like , vibration , compression, Drop Tester, Burst strength, Hydro static testers

We offer a wide range of Melt Flow Index Tester widely used to determine the melt flow index of plastic material. This system is structured with a heated extruder tube, an interchangeable jet and a piston with dead weights. This piston is used to apply the required pressure on the material inside the carbon steel extruder tube. A Bend Heater is affixed around outer circumference of the extruder tube and is used as an effective heating material. This heater is covered with a mineral wool insulation. The extruder tube is installed with a PID controller to indicate & control the temperature. Manufactured in accordance to the ASTM D 1238 & equivalent standards, this range of testers is available in various models with different parameters.
Construction of the metal flow index tester:

• The assembly is fixed on a rigid stand.
• The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate
• The jet through which the extruder is pushed out is made from hardened and ground die steel
• The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet.
• The piston moves inside the cavity of tube. A sleeve to provide to guide the relieved portion of the piston
• The plate-form is thermally insulated from the load.
• The extruder tube assembly is mounted on a metal box.
• A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, digital preset timer & other electronic components.
• Cleaning tools for tube cavity, jets, stoppers and cutters for the extrudate are also available with the equipment.
• The top of the piston carries a plate-form for keeping the load on.

We offer a wide range of Melt Flow Index Tester widely used to determine the melt flow index of plastic material. This system is structured with a heated extruder tube, an interchangeable jet and a piston with dead weights. This piston is used to apply the required pressure on the material inside the carbon steel extruder tube. A Bend Heater is affixed around outer circumference of the extruder tube and is used as an effective heating material. This heater is covered with a mineral wool insulation. The extruder tube is installed with a PID controller to indicate & control the temperature. Manufactured in accordance to the ASTM D 1238 & equivalent standards, this range of testers is available in various models with different parameters.

Construction of the metal flow index tester:

• The assembly is fixed on a rigid stand.
• The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate
• The jet through which the extruder is pushed out is made from hardened and ground die steel
• The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet.
• The piston moves inside the cavity of tube. A sleeve to provide to guide the relieved portion of the piston
• The plate-form is thermally insulated from the load.
• The extruder tube assembly is mounted on a metal box.
• A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, digital preset timer & other electronic components.
• Cleaning tools for tube cavity, jets, stoppers and cutters for the extrudate are also available with the equipment.
• The top of the piston carries a plate-form for keeping the load on.

To check the resistance to ' Crashes ' while transporting , different models available for different products as per IS 7028 (part3). For testing impact resistance of packaged articles like Cartons, Containers, Crates etc.

We are engaged in manufacturing and supplying a wide range Drop Tester to validate the strength of moulded containers. The entire range manufactured is at par with the ASTM D 5276-98 and IS 7028( part-4) standards and can be availed in various models. Used for several applications, these testers are accurate and reliable.

Other Details:

• Drop tester is designed to place the 90% water filled container on a resting platform
• These are allowed to drop in 6 to 8 different orientations
• The drop height 1.2 meters and can be altered according to clients specifications
• This test is considered to be effective if there is no leakage from any part of the container
• A fresh container is used every time, for each drop at different orientation

Our range includes a wide variety of Plastic Testing Equipment that is widely used to indicate the level of current load, peak load, and peak elongation. These automatic machines include a ball screw, geared motor, micro-processor based controller, load cell, and encoder. In addition to this, we also provide a similar application for testing peel strength of the specimen. Precision-engineered, these machines are at par with the ASTM D 638, ASTM D 412 & ASTM D 882, and ASTM D 903 standards.

Manufactured using latest technology, Ross Flex Tester offered by us is compliance to the ASTM D 1052 and IS3400 standards. Available at affordable prices, these testers are used to determine the flexibility of the specimen under test. Owing to features like durability, reliability, and long service life, our products are widely demanded by the clients across the globe.

We are engaged in manufacturing and supplying a wide range of Abrasion Testers. This range is designed to determine the resistance of the specimen under test against abrasion. Designed and developed in compliance with the IS 34 standards, these apparatus can be availed at industry leading prices.

The Universal Tensile Testing Equipment offered by us are used to determine the tensile strength and the elongation of the specimen under test. These are also used as compression testers in various industries. The entire range is manufactured in accordance with the ASTM D 638 & D882 and ASTM D695 standards. Apart from this, we also provide a flexural testing equipment which is designed as per ASTM D 790 standards. We offer these measuring devices in various models.

The entire range of our Izod Impact Testers For Rigid Plastics PIZ – 01 is used to measure energy required to break thicker plastics of defined shapes and sizes under maximized velocity point of swinging weighted pendulum. The variations in the angle of pendulum are displayed on the digital indicator. This testing device is available in two models.

We offer a wide range of Co-efficient Of Friction Tester, catering to the needs of various national as well as international rubber and plastic industries. This apparatus is used to test the co-efficient of friction for various plastic bags and sheets. The entire range is tested to ensure its compliance with TAPPI T-815, ASTM D 1894, and 2534 standards.

Designed to measure the ability of package to withstand the compression resistance, these Compression Testers (Model No. PCT-01) are available in various models. Manufactured as per the IS 7028 ( part 6 & 9 ), ISO 2872 standards, these equipment consists of a moving plate, geared motor, and Microprocessor based digital indicator. This indicator detects the movement and the compression of the specimen.

Our range includes a wide variety of Rubber Testing Equipment that is widely used to indicate the level of current load, peak load, and peak elongation. These automatic machines include a ball screw, geared motor, micro-processor based controller, load cell, and encoder. In addition to this, we also provide a similar application for testing peel strength of the specimen. Precision-engineered, these machines are at par with the ASTM D 638, ASTM D 412 & ASTM D 882, and ASTM D 903 standards.

The HDT-VSP Apparatus offered by us is widely used as Heat deflection Testers and Vicat softening Point. This apparatus is essentially used to test the variations in the temperature & softening point of the specimen used. Available in various models with a number of stations, these apparatus are manufactured as per the ASTM D 1525 & D648 standards.

Balls are dropped through a pipe from predetermined heights with the help of mechanical or electromagnetic releasing jaws and slot on the pipe. Balls can be also fitted to a mild steel block and connected to a rope for pulling it back to the required height, up to 2 mtr.
Pipe is clamped to channel support at a distance according to the size of the sample.  Ball should fall only once on the test piece.

We provide a wide range of Vibration Tester that is well known for its quality and cost-effectiveness. These are designed to check the resistance to vibrations in various specimen. Available in various models, these testing equipment are manufactured in compliance with IS 7028(part-2 & 12) standards/ ASTM D999- all segmentsA/B?C?D??.

The Digital( also analogue) Bursting strength Tester is suitable for finding the stregth paper ad card board boxes normally used in packaging. The  Digital contaoller have a unique featere of after bursting tester will automaticlly returned to original position to restart. It very easy to opearate and dont need manual interfearence .

Digital diplay have selection facility of differnt units lik Kg/cm, PSI . etc. 

Eaast changable Rubber diaphrem and Hydro-Fluid (Glyscerine) uping are easy and provision given, so for future maintenence easy and can done by your techniciain itself.

Italian make Pressure sensor gives accurate result and long lasting.

Please contact polyplasteqp@gamil.com/ 022 25617126  

The vibration testes available as per different standard, ASTM d999, is tp28, IEC, difece, Naval. vertical, horizontal, Sinisuidal r available. The picture is if Sinisuidal, 650x650, 900 x900 at are common, also make digital display of data including g value & software available optionally.

We POLYPLAST equipment and accessores, make  different testers incluidng HDT VSP used in polymer and other industries. The  Heat deflection point  is find our with temperature riced in a set rate and xample /when the polymer /specimen kept under load on 3 point position on medium normally silicon oil deforms  on specific temperature the Digital gauge will show displacement and temperature to be notice. The Load. temperature increment rate are programmable amd cooling facility also provide. 

VSP also in similar nature and the pointer will penertrate in specimen under test medium ( silicon oil) and will show displacement and temperature to be noted. There are sinle , multiple station and cooling facility optional feature includig software faciltiy are there .  Pls contact polyplasteqp@gmail.com / +91 22 25617126/ +91 9821618727

Vidoe link : 

POLYPLAST make Torque Tester for find Bottle container's opening and closing torque find , it can keep specimen size up to 180dia from 20mm. The Reading in Nm/Kg./cm reading will get directly for both clossing and opening.  The Tester is made of study allloye steal with aluminimum blocks for holding bottles studly, the easy adjustable mechnanism grip/holdss thespecimen firmly. The canedian transduces high acuracy & unifirmity is best in class will collect the Torque( 5Nm & 10Nm max normally) with  The digital indicator will show current and Peak reading with 2 decimels.   

we do make customerisation fo this product depends on requirement. Polyplast Mumbai do make diffent type of Testers including for package worthiness like , vibration , compression, Drop Tester, Burst strength, Hydro static testers

We offer a wide range of Melt Flow Index Tester widely used to determine the melt flow index of plastic material. This system is structured with a heated extruder tube, an interchangeable jet and a piston with dead weights. This piston is used to apply the required pressure on the material inside the carbon steel extruder tube. A Bend Heater is affixed around outer circumference of the extruder tube and is used as an effective heating material. This heater is covered with a mineral wool insulation. The extruder tube is installed with a PID controller to indicate & control the temperature. Manufactured in accordance to the ASTM D 1238 & equivalent standards, this range of testers is available in various models with different parameters.
Construction of the metal flow index tester:

• The assembly is fixed on a rigid stand.
• The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate
• The jet through which the extruder is pushed out is made from hardened and ground die steel
• The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet.
• The piston moves inside the cavity of tube. A sleeve to provide to guide the relieved portion of the piston
• The plate-form is thermally insulated from the load.
• The extruder tube assembly is mounted on a metal box.
• A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, digital preset timer & other electronic components.
• Cleaning tools for tube cavity, jets, stoppers and cutters for the extrudate are also available with the equipment.
• The top of the piston carries a plate-form for keeping the load on.

We offer a wide range of Melt Flow Index Tester widely used to determine the melt flow index of plastic material. This system is structured with a heated extruder tube, an interchangeable jet and a piston with dead weights. This piston is used to apply the required pressure on the material inside the carbon steel extruder tube. A Bend Heater is affixed around outer circumference of the extruder tube and is used as an effective heating material. This heater is covered with a mineral wool insulation. The extruder tube is installed with a PID controller to indicate & control the temperature. Manufactured in accordance to the ASTM D 1238 & equivalent standards, this range of testers is available in various models with different parameters.

Construction of the metal flow index tester:

• The assembly is fixed on a rigid stand.
• The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate
• The jet through which the extruder is pushed out is made from hardened and ground die steel
• The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet.
• The piston moves inside the cavity of tube. A sleeve to provide to guide the relieved portion of the piston
• The plate-form is thermally insulated from the load.
• The extruder tube assembly is mounted on a metal box.
• A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, digital preset timer & other electronic components.
• Cleaning tools for tube cavity, jets, stoppers and cutters for the extrudate are also available with the equipment.
• The top of the piston carries a plate-form for keeping the load on.

To check the resistance to ' Crashes ' while transporting , different models available for different products as per IS 7028 (part3). For testing impact resistance of packaged articles like Cartons, Containers, Crates etc.

We are engaged in manufacturing and supplying a wide range Drop Tester to validate the strength of moulded containers. The entire range manufactured is at par with the ASTM D 5276-98 and IS 7028( part-4) standards and can be availed in various models. Used for several applications, these testers are accurate and reliable.

Other Details:

• Drop tester is designed to place the 90% water filled container on a resting platform
• These are allowed to drop in 6 to 8 different orientations
• The drop height 1.2 meters and can be altered according to clients specifications
• This test is considered to be effective if there is no leakage from any part of the container
• A fresh container is used every time, for each drop at different orientation

Our range includes a wide variety of Plastic Testing Equipment that is widely used to indicate the level of current load, peak load, and peak elongation. These automatic machines include a ball screw, geared motor, micro-processor based controller, load cell, and encoder. In addition to this, we also provide a similar application for testing peel strength of the specimen. Precision-engineered, these machines are at par with the ASTM D 638, ASTM D 412 & ASTM D 882, and ASTM D 903 standards.

Manufactured using latest technology, Ross Flex Tester offered by us is compliance to the ASTM D 1052 and IS3400 standards. Available at affordable prices, these testers are used to determine the flexibility of the specimen under test. Owing to features like durability, reliability, and long service life, our products are widely demanded by the clients across the globe.

We are engaged in manufacturing and supplying a wide range of Abrasion Testers. This range is designed to determine the resistance of the specimen under test against abrasion. Designed and developed in compliance with the IS 34 standards, these apparatus can be availed at industry leading prices.

The Universal Tensile Testing Equipment offered by us are used to determine the tensile strength and the elongation of the specimen under test. These are also used as compression testers in various industries. The entire range is manufactured in accordance with the ASTM D 638 & D882 and ASTM D695 standards. Apart from this, we also provide a flexural testing equipment which is designed as per ASTM D 790 standards. We offer these measuring devices in various models.

The entire range of our Izod Impact Testers For Rigid Plastics PIZ – 01 is used to measure energy required to break thicker plastics of defined shapes and sizes under maximized velocity point of swinging weighted pendulum. The variations in the angle of pendulum are displayed on the digital indicator. This testing device is available in two models.

We offer a wide range of Co-efficient Of Friction Tester, catering to the needs of various national as well as international rubber and plastic industries. This apparatus is used to test the co-efficient of friction for various plastic bags and sheets. The entire range is tested to ensure its compliance with TAPPI T-815, ASTM D 1894, and 2534 standards.

Designed to measure the ability of package to withstand the compression resistance, these Compression Testers (Model No. PCT-01) are available in various models. Manufactured as per the IS 7028 ( part 6 & 9 ), ISO 2872 standards, these equipment consists of a moving plate, geared motor, and Microprocessor based digital indicator. This indicator detects the movement and the compression of the specimen.

Our range includes a wide variety of Rubber Testing Equipment that is widely used to indicate the level of current load, peak load, and peak elongation. These automatic machines include a ball screw, geared motor, micro-processor based controller, load cell, and encoder. In addition to this, we also provide a similar application for testing peel strength of the specimen. Precision-engineered, these machines are at par with the ASTM D 638, ASTM D 412 & ASTM D 882, and ASTM D 903 standards.

The HDT-VSP Apparatus offered by us is widely used as Heat deflection Testers and Vicat softening Point. This apparatus is essentially used to test the variations in the temperature & softening point of the specimen used. Available in various models with a number of stations, these apparatus are manufactured as per the ASTM D 1525 & D648 standards.

Balls are dropped through a pipe from predetermined heights with the help of mechanical or electromagnetic releasing jaws and slot on the pipe. Balls can be also fitted to a mild steel block and connected to a rope for pulling it back to the required height, up to 2 mtr.
Pipe is clamped to channel support at a distance according to the size of the sample.  Ball should fall only once on the test piece.

We provide a wide range of Vibration Tester that is well known for its quality and cost-effectiveness. These are designed to check the resistance to vibrations in various specimen. Available in various models, these testing equipment are manufactured in compliance with IS 7028(part-2 & 12) standards/ ASTM D999- all segmentsA/B?C?D??.