Our Product / Services
Adhesives
2 Products availableNatural And Synthetic Resin
2 Products availableLaboratory Chemicals
1 Products availableLab Instrument
1 Products availableEpoxy Coatings
1 Products availableCement Grout
1 Products availableOur Complete range of products are PCP Ease 101L Superplasticizer Admixture, PCP Ease 102M Superplasticizer Admixture, PCP Ease 103H Superplasticizer Admixture, PCP Ease 4229 Superplasticizer Admixture and PCP Naplig Flow 100N Superplasticizer Admixture.
PCP I00 IOIL h light brown/yellowish coloured polycaboxylic ether based new generation hyper plasticier confirming to EN specification, developed for specitic application in high performance concrete.
The hyper dispersion effect products by PCP EASE 101L. Exhibits better durability and performance in concrete. PCP EASE 101L is compatible with all portland cement and pozzolonic materials confirming to international standards.
Advantages
Primary appliction areas
Dosages / Uses
SafetyPCP EASE 101L is non toxic, non flammable and non hazardous, However, any splash on the human bosy should be washed out immediately with plenty of waters.
PCP EASE 102M is a polycarboxylate ether based suerplasticiser and a new type-range water-reducing admixture for concrete grades from M20 to M60. PCP EASE 102M is designed to provide good workability without aegregation confirming to ASTM C-494 Type G, C-1017 and IS 9103:2003.
Advantages
Primary Application Areas
Dosages / UsesPCP EASE 102M has recommmended dosage range of 0.5 to 1.5% by weight of cementious material. But the dosage will vary accordingly to concrete material used.
Storage PCP EASE 102M Should be sored under shad. if frozen it properties can be recovered after thawing and agitating thoroughly.
SafetyPCP EASE 102M is non toxic , non flammable and non hazardous. However, any splash on the human body should be washed out immmediatly with plenty of water
Advantages
Primary Application Areas
Dosages / UsesPCP EASE 4229 has recommmended dosage range of 0.5 to 1.5% by weight of cementious material. But the dosage will vary accordingly to concrete material used.
Storage PCP EASE 4229 Should be sored under shad. if frozen it properties can be recovered after thawing and agitating thoroughly.
SafetyPCP EASE 4229 is non toxic , non flammable and non hazardous. However, any splash on the human body should be washed out immmediatly with plenty of water.
PCP - NAPLIG FLOW 10ON is a brown ready to use concre superplatiscer, Conrming to the specification of ASTM C 494 type and IS 9103-1999 (Amendment 2003).
AdvantagesBetter slump retention to achieve potable concrete. Compatible with all type of cement. Increase ultimate strength with maximum water reduction Controls set retardation with optimum dosage.
Dosages/UsesGeneraly dosed 0.5 to 1.5% by weigth of cement anhanced upto 3.5 % depending upon climate condition, but better go for trial mix to determine the optimum dosages.
SafetyPCP-NAPLIG FLOW 100N is non toxic , non flammable and non hazardous. However, any splash on the human body should be washed out immmediatly with plenty of water
PCP - NAPLIG SUPER FLOW 101N is brown liquid admixture ready to used fir high workability retention with set retarding effect complies with ASTM C 494 type-A, G and B.
Purpose and applicationTo produce workability and to make concrete virtually self leaing and requies no vibration during placing or may also to be used promote high ultimate strength by large water reduction (UP to 20%) which maintain workability for pumping, pre-stressed and structural concrete.
Advantages
Dosages/UsesIt is better go for trial mix to determine the optimum dose generally dosed 0.9 to 1.6% by weight of cemnet enhanced upto 3.5 % depending upon climate condition.
SafetyPCP-NAPLIG FLOW 100N is non toxic , non flammable and non hazardous. However, any splash on the hum7an body should be washed out immmediatly with plenty of water.