Our Product / Services

Laboratory Equipments 22 Products available
Measuring Instruments & Equipment 13 Products available
Tables 12 Products available
Beds 9 Products available
Trolleys 7 Products available
Clean Room Equipment 6 Products available
Lab Instrument 6 Products available
Sterilizers 5 Products available
Industrial Ovens & Furnaces 5 Products available
Autoclaves 4 Products available
Others Products / Services 162 Products / Services available

Laboratory Equipments #35240

We are leaders in the market for providing best range of Thawing Water Bath, High Temperature Oil Bath, Serological Water Bath, Refrigerated Circulating Water Bath and Fume Hood

Thawing Water Bath

705
Temperature + 37°C (accuracy ± 1°C)
External Dimensions W x D x H (mm) 760 x 530 x 640
Thawing Timer Adjustable up to 2 Hrs
Internal Body Material Stainless Steel AISI304 Grade
External Body Material Powder Coated CRCA Steel
Noise Level Noise Level
Recommended Line Voltage Corrector 3 KVA
Electrical 220-240 Volts, 50 Hz, SINGLE PHASE zero size imag

Thawing Water Bath (PLT-142 A)

APPLICATIONS OF THAWING WATER BATH

We are one of the largest manufacturers of Thawing Water Bath engaged in marketing & exporting wide array of Thawing Water Baths used widely used widely in the food & food processing industry.
It features exclusively designed microprocessor for accurate temperature control as well as circulating pump to ensure proper uniformity of equal heating of the liquid. The main focus of its use is in thawing , i.e. , heating of the frozen food for cooking and eating purposes.
It finds maximum utilization in the western countries and the middle east where most of the meat consumed is frozen. The hotels and hospitality industry is also one of its largest buyers. We have exported Thawing Bath to more than 40 countries of the world
It has a sturdy cabinet that is fabricated by using the best grades of stainless steel and comes with plethora of accessories to match requirements of specific processes.
It also features outstanding quality heating element for long service life. Our Thawing Water Bath is manufactured according to the customer specifications.

SALIENT FEATURES & CONSTRUCTION OF THAWING WATER BATH

Outer Chamber is made up of MS powder coated
The inner chamber is made up of Stainless Steel (304 grade).
Between the outer and inner body wool is stuffed for insulation and for the prevention of thermal loss
Door Gasket is provided for proper sealing along with heavy hinges and door closing device
Heating elements are made up of high quality Nichrome
Kanthal wire are embedded around the chamber
Supplied with 1 (or) 2 removable shelves
Temperature is controlled by Electronic Digital temperature indicator and is fitted in front for easy visibility
Temperature is displayed on digital LED
Front panel beside the temperature display also includes the ON/OFF switch
Supplied with chord and Plug
Operating Voltage: 22 Volts AV (50 Hz)

View Complete Details

Ask Latest Price & Details

High Temperature Oil Bath

High Temperature Oil Bath (PLT-121)

APPLICATIONS OF HIGH TEMPERATURE OIL BATH

Double Walled High Temperature Oil Bath having wide range of application, such as oxidation stability test on oils, greases, etc, or any other test requiring high temperature control having high thermal efficiency.
Double Walled High Temperature Oil Bath is low cost options for heating- ideal tool for Laboratories, Pharmaceutical, petroleum Industries and Institutions.

SALIENT FEATURES & CONSTRUCTION OF HIGH TEMPERATURE OIL BATH

The Oil bath offered by us is basically designed to tolerate high temperatures with ease.
Inner Tank and lid made of Stainless Steel (SS-304 grade).
Outer chamber is made of Mild Steel duly powder coated.
Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & stainless steel tank.
Heating elements are positioned in the floor and side walls & a natural mixing of the medium arises, providing better temperature distribution in the bath
Temperature range 500C to 2500C.
Operating Voltage: 220 Volts AC (50 Hz)

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF HIGH TEMPERATURE OIL BATH

Model No.	HOB 1	HOB 2	HOB 3
Internal Dimensions (L X B X D)	250 x 250 x 250mm	300 x 300 x 250mm	350 x 350 x 250mm
Approximate Capacity	15 Ltr.	22 Ltr.	32 Ltr.
Heating Load	2.5 KW	3.5 KW	4.5 KW
Temperature	Controlled by microprocessor based digital temperature indicator cum controller 1.5 KW 2.0 KW
Temperature Range	500C to 250^°C
Temperature Accuracy	± 3^°C.
Heater Protection	By Stainless Steel Perforated cover
Stirring Arrangement	By F. H. P. stirrer fitted with stainless steel shaft.
Stirring Speed	Can be regulated by speed regulator.

OPTIONAL FEATURES OF HIGH TEMPERATURE OIL BATH

Temperature control by	By profile (Micro Programmable) controller.
Timer Facility	Can be in built with Digital Electronic Timer
Communication Port	with interface and data cable to download data to your PC

View Complete Details

Ask Latest Price & Details

Serological Water Bath

Serological Water Bath (PLT-109)

APPLICATIONS OF SEROLOGICAL WATER BATH

Double Walled Serological water bath is a versatile equipment to handle any clinical procedure, Incubation, Inactivation, Agglutination & Biomedical procedures.
Double Walled Serological Water Bath is low cost options for Biotechnology, Clinical, Environmental, Medical, Petroleum, Pharmaceutical or Industrial Applications.

SALIENT FEATURES & CONSTRUCTION OF SEROLOGICAL WATER BATH

Double walled construction.
Inner Tank and lid made of Stainless Steel (SS-304 grade).
Outer chamber is made of Mild Steel duly powder coated.
Flat Stainless Steel Lid prevents Evaporation.
Heating by immersion heaters.
Temperature range up to 900C.
Controls temperature within an accuracy of 1C.
Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & stainless steel tank.
Fitted with drain plug for easy cleaning.
To work on 220/230V AC supply.

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF SEROLOGICAL WATER BATH

Model No.	WBS 1	WBS 2	WBS 3	WBS 4
Internal Dimensions (L X W X D)	300 x 250 x 175mm	325 x 300 x 175mm	450 x 300 x 175mm	600 x 300 x 175mm
No. of Racks (to hold)	2	4	6	8
Approx. Capacity	13 Ltr.	17 Ltr.	23 Ltr.	31 Ltr.
Heating Load	1.0 KW	1.5 KW	2.0 KW	2.0 KW
Top Lid	Stainless Steel
Temperature	Controlled by Hydraulic Type Capillary Thermostat
Temperature Range	From ambient to 90^°C
Temperature Accuracy	± 1^°C.
Temperature Display	Thru L-shaped prismatic thermometer. (not supplied with the unit)
Heater Protection	By Stainless Steel Perforated cover

OPTIONAL FEATURES OF SEROLOGICAL WATER BATH

Electronic Digital Controller	Temperature controlled by Micro processor based temp. indicator cum controller
Stirring Arrangement	By F. H. P. stirrer fitted with stainless steel shaft & Blades
Temperature control by	By profile (Micro Programmable) controller.
Stirring Speed

View Complete Details

Ask Latest Price & Details

Refrigerated Circulating Water Bath

Refrigerated Circulating Water Bath (PLT-115)

APPLICATIONS OF CIRCULATING WATER BATH

The unit serves the dual purpose i. e. it can be used as a stand alone unit. As well as, a part or subsystem of some bigger system. Temperature Range 50C to 900C controlled by Microprocessor based Digital Temperature Controller cum Indicator.
The Unit is ideal for external temperature control applications to external systems such as Rotary Vacuum Evaporators, Refractometers, Polarimeters, Fermenters, Electrophoresis Chamber, Chromatography Columns, Condensers, Rheometers, and general laboratory cooling applications.

SALIENT FEATURES & CONSTRUCTION FOR REFRIGERATED WATER BATH CIRCULATING

A compact refrigerated/heating circulator.
Double walled construction.
Inner Tank made of Stainless Steel (SS-304 grade).
Outer chamber is made of Mild Steel duly powder coated.
Heating by immersion heaters
Cooling by sturdy refrigeration unit done by ISI mark compressor / Condensing Units CFC free & R-134 a eco friendly refrigerant.
Temperature range 50C to 900C.
Controls temperature within an accuracy of 1C by microprocessor based digital temperature indicator cum controller.
Temperature stability is maintained by internal circulation in bath
Thermal loss is prevented by filling PUF (Insulation) in space between the outer body & stainless steel tank.
Low noise level.
To work on 220/230V AC supply.

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF REFRIGERATED WATER BATH CIRCULATING

Model No.	RWB 1	RWB 2
Internal Dimensions (L X W X D)	250 x 250 x 250mm	500 x 250 x 250mm
Approx. Capacity	17 Ltr.	32 Ltr.
Approx. Heating Load	2.0 KW	2.5 KW
Top Lid	Double walled insulated
Temperature	Controlled by microprocessor based digital temperature indicator cum controller.
Temperature Range	5^°C to 90^°C
Temperature Accuracy	± 1^°C.
Temperature Display	Digital LED with set value (SV) & process value (PV).
Temperature Sensor	RTD (Pt-100)

OPTIONAL FEATURES OF REFRIGERATED WATER BATH CIRCULATING

Temperature control by	By profile (Micro Programmable) controller.
Communication Port	With interface and data cable to download data to your PC
Voltage Stabilizer	Servo or Automatic Stabilizer to regulate in coming voltage

View Complete Details

Ask Latest Price & Details

Fume Hood

1.17 Lakh /Piece Get Latest Price

Material Stainless Steel
Manufacturing Brand Tanco
Material Grade SS 304
Phase Single Phase
Model Number PLT-272 H
Front Door Moves vertically up and down with concealed counter balanced weight/by Hinges
Standard Accessory Gas/Air cock fitted with 15/5 amp socket with switches
Working Table Top Fitted with acid/alkali resistant tile and SS sink fitted with swan type water tap.
Voltage (V) AC 220 / 230 V
Frequency (Hz) 50 Hz

View Complete Details

Ask Latest Price & Details

Medico Centrifuge

Medico Centrifuge (PLT-181)

APPLICATIONS OF MEDICO CENTRIFUGE

TANCO Medico Centrifuge Machine is low priced unit ideal for routine centrifuging tests.
Used for majority of the small capacity centrifuging requirements of medical practitioners, pathological laboratories and hospitals.

SALIENT FEATURES & CONSTRUCTION OF MEDICO CENTRIFUGE

It is a compact bench top model unit.
Rust proof Aluminum body.
Vibration free performance.
Maximum RPM 3500.
The units are fitted with resiliently mounted motor.
Best quality rotor with double enameled windings and coil.
Having built in 5 step speed regulator.
Complete with metel shields, prophylene/glass tubes & tube carriers.
Available with Swing out & Angle rotor.
Fitted with vacuum feets for stability.
Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF MEDICO CENTRIFUGE

Model No.		CEN-4	CEN-6	CEN-8
Capacity	MI	4 X 15	6 X 15	8 X 15
Type of Head		Swing out	Swing out	Angle
Max. Speed	RPM	4	6	8
Max. RCF	'g'	1850	1600	1450

View Complete Details

Ask Latest Price & Details

Plant Growth Chamber

Environmental / Plant Growth Chamber (PLT-149)

APPLICATIONS OF ENVIRONMENTAL PLANT GROWTH CHAMBER

"TANCO" brings the ultra-high-tech Triple walled Microprocessor controlled, solid-state Plant Growth/ Environmental Chamber used to study and contemplate the effects of different environmental parameters such as humidity, temperature and light in various applications tests involving micro-organisms, plants, in tissue culture applications, enzyme reaction studies, growth observation studies, and fermentation analysis.
Also Used for forestry research works propagation of seeds, and incubation that requires a controlled environment (hot/cold cycles and light dark operations). It provides the necessary light, enclosed humid atmosphere and warmth for successful plant growth suitable for investigation in the eftect of day light on flowering cycle, growth rate etc. & have a variety of usage in R&D laboratories and research studies.

SALIENT FEATURES & CONSTRUCTION OF ENVIRONMENTAL PLANT GROWTH CHAMBER

It offers unsurpassed accuracy and reliability in the control of temperature, humidity and lighting. energy efficient lighting systems, culminating in plant growth chambers with a wider performance range, greater control of conditions and with unequalled reliability and durability.
Programmable to enable true dawn/dusk simulation - reduces light shock
Reduce heating effects on plant materials.
Enable easy cleaning and servicing.
Ensure constant light output by maintaining lamps at their maximum operating temperature.
Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish.
Inner chambers are made of STAINLESS STEEL SHEET (304 Grade).
Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement.
A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.
Door operated illumination lamp is fitted inside the chamber for easy visibility.
Exterior illumination with the help of fluorescent lamps/tubes accounts for artificial daylight conditions.
Energy efficient - high frequency fluorescent lighting uses up to 25% less energy than ordinary fluorescent lamps
Light regulation allows user to select exactly the desired lighting level between approximately 10 to 100% output- provides maximum lighting uniformity at low light levels.
Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber.
Inner chamber has ribs for placing the shelves at convenient levels.
Heating elements are placed in the path of moving air duly insulated from the body.
Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked Compressor/Condensing Units CFC free & R-134 a eco friendly refrigerant.
High grade Glass Wool / Puf Insulation between outer and inner chamber for minimal thermal losses.
Fitted with Control Panel with advanced micro-processor based technology housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature provided with Volt meter on the panel to read the incoming voltage. With illumination and humidity controls according to requirements.
Safety Thermostate to prevent over heating.
Caster wheels mounted for easy portability.
Supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS & ORDERING INFORMATIONS OF ENVIRONMENTAL PLANT GROWTH CHAMBER

Model No.	PGC- 1	PGC- 2	PGC- 3	PGC- 4	PGC- 5
Usable Space in MM	610 x 450 x 410	845 x 500 x 400	870 x 570 x 560	900 x 650 x 570	700 x 900 x 650
Capacity	4 Cu.ft.	6 cu. ft	10 cu. ft	12 cu. ft	15 cu. ft
Approx Volume (Ltr)	113 ltrs	170 ltrs	284 ltrs	340 ltrs	425 ltrs
No. of Shelves	2	2	2	3	3
Temperature Range	5^°C above ambient to 60°C (Resolution 0.1^°C)
Temp. Controller	By Microprocessor Based PID Digital Temperature/Humidity Indicator cum Controller.
Temp. Accuracy	+1^°C
Humidification	By steam injection process.
Humidity Range	5% above ambient from 40% to 95% RH at cool temperatures.
Humidity Accuracy	+ 5% RH
Display:	LED Display for Set Value(SV) and Process Value (PV)
Relay	Solid state electronic relay with protective heat sink.
Air Circulation	By forced convection system
Safety	By safety thermostat to prevent overheating
Illumination	Exterior illumination with fluorescent tubes/lamps.
Insulation	By High density PUF insulation
Operations	Nearly silent operation with ultra-low vibration
Voltage Indicator	By Digital Volt Meter fitted on Panel
Electric Supply	220/230V AC, 50/60Hz

OPTIONAL FEATURES OF ENVIRONMENTAL PLANT GROWTH CHAMBER

Controlling of Temperature	By Profile Digital Microcontroller having 4 Programmers each of16 steps (total 64 steps of ramp / soak profile)
PLC Based Control Systems	With Touch Screen Display with Direct Thermal / Dot Matrix Printer.
LCD Controller with Data Logger	(16 x 2) with optional RS-485 communication ports, cables, window based software with inbuilt data recording. For (Temperature, humidity and light levels) storage up to 2500 events.
Communication Port	Communication Port with interface and data cable to download data to your PC.
Lighting Control	Five Levels light control (0%, 25%, 50%, 75% and 100%)
Timer	With reverse 0 - 24 hours for regulating hours of light and darkness
Real Time Clock	Facility can be incorporated
Alarm Facility	Audio/Visual alarm for temperature deviation from set values.
High Voltage Protection	Through automatic voltage stabilizer (Optional)

View Complete Details

Ask Latest Price & Details

Water Bath Rectangular

Water Bath Rectangular Single Walled (PLT-107)

APPLICATIONS OF WATER BATH SINGLE WALLED

Single Walled Water Bath generally used for evaporating liquids for boiling the material.
Single Walled Water Bath is low cost options for heating / boiling ideal tool for Laboratories, Pharmaceutical, Food & Beverage Industries and Institutions.

SALIENT FEATURES & CONSTRUCTION OF WATER BATH SINGLE WALLED

Single walled made of heavy gauge stainless steel.
Provided with concentric rings (Removable) of 75mm hole.
Concentric rings can be removed to accommodate containers of various sizes.
Heating by immersion heaters.
Temperature range ambient up to 90^oC.
Operating Voltage: 220 Volts AC (50 Hz)

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF WATER BATH SINGLE WALLED

Model No.	WBR-1	WBR-2
Internal dimensions (LX W X D)	300 x 250 x100mm	350 x 400 x100mm
Capacity	8 Ltr	15 Ltr
No. of Holes	6	12
Holes Dia.	75 mm	75 mm
Heating Load	1.0 KW	2.0 KW

View Complete Details

Ask Latest Price & Details

Digital Bacteriological Incubator

Incubator Bacteriological Digital (PLT-136 A)

APPLICATIONS OF DIGITAL BACTERIOLOGICAL INCUBATOR

Bacteriological Incubator (Memmert Type) Double walled is elegantly designed in various applications for microbiology, cell cultivation of animals and plants, food studies. Our Incubators stands for unparallel precise, even and gentle temperature control.
Double Walled Incubators (Memmert Type) is low cost options for various experiments in, industries, R&D labs, Pharmaceutical, Food & Beverage Industries and Institutions- in the field of Medical, Agricultural and Industrial Research used for Drying of slides, paraffin embedding, tissue culture work, incubation of antibody test, excellent for Microbiological determinations, crystallization studies and Incubation of hydroxyl steroids.

SALIENT FEATURES & CONSTRUCTION OF DIGITAL BACTERIOLOGICAL INCUBATOR

Outer chamber is made of Mild Steel duly powder coated.
Inner chamber made of ALUMINIUM or STAINLESS STEEL (304) sheet.
Forced convection system ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber.
Door has double viewing window to observe the sample placed inside the chamber without disturbing the thermal condition.
Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & Inner chamber.
Door Gasket fixed on the double walled door for proper sealing.
Fitted with heavy hinges with a ball catcher, spring loaded door closing device. Door is duly insulated.
Adjustable two ventilation slides control inner air / vapor circulation.
Beaded heating elements made of high quality Ni chrome/Kanthal wire are placed in ribs, at bottom and sides for uniform heat distribution.
Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves.
Temperature is controlled by electronic digital temperature indicator cum controller from 50C to100C 1C. fitted on the front panel for easy operations.
Different programme functions can be designed for a wide variety of applications, and even when used
Temperature is displayed by Digital LED with SV and PV display at front of the oven.
Front Panel is provided with ON/OFF switch, temperature controller and indicators
Supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF DIGITAL BACTERIOLOGICAL INCUBATOR

Model No.	INE 1	INE 2	INE 3	INE 4	INE 5	INE 6	INE 7	INE 8
Inner Chamber in MM (W x H x D)	300x300x300	355x355x355	455x455x455	455x605x455	455 x 605 x 605	605x605x605	605x910x455	605x910x605
Inches Conversion	12 x 12 x 12	14 x 14 x 14	18 x 18 x 18	18 x 24x 18	18 x 24 x 24	24 x 24 x 24	24 x 36 x 18	24 x 36 x 24
Capacity	28 ltrs	43 ltrs	90 ltrs	105 ltrs	120 ltr	215 ltrs	240 ltrs	325 ltrs
Heating Load	0.50 KW	0.50 KW	1.00 KW	1.00 KW	1.50 KW	1. 50 KW	1.50 KW	2.00 KW
No. of Shelves	2	2	2	2	2	2	3	3
Temperature Range	5^°C above ambient to 70^°C
Temp. Controller	By Microprocessor Based PID Digital Temperature Indicator cum Controller.
Temp. Sensitivity	+1^°C.
Air Circulation	By forced convection system
Relay	Solid state electronic relay with protective heat sink.
Auto Tuning System	System is compatible with auto tuning system

OPTIONAL FEATURES OF DIGITAL BACTERIOLOGICAL INCUBATOR

Controlling of Temperature	By Profile (Micro Programmable Controller)
Audio Alarm System	Activates at end of cycle Buzzer.
Timer Facility	Can be in built with Digital Electronic Timer
Communication Port	RS - 485 with Window based software
PLC Based Control Systems	With Touch Screen Display with Direct Thermal / Dot Matrix Printer.
With Touch Screen Display with Direct Thermal / Dot Matrix Printer.	16 x 2) with optional RS-485 communication ports, cables, window based software with inbuilt data recording.

View Complete Details

Ask Latest Price & Details

Platelet Incubator

Platelet Incubator (PLT-142 G)

APPLICATIONS OF PLATELET INCUBATOR

"TANCO" Platelet Incubator fitted with microprocessor controller is designed to store platelet concentrates in continuous motion before centrifuge in controlled environment.

SALIENT FEATURES & CONSTRUCTION OF PLATELET INCUBATOR

Robust construction Outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish.
Fitted with Durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber.
Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement.
Door operated illumination lamp is fitted inside the chamber for easy visibility.
A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.
High grade insulation between outer and inner chamber for minimal thermal losses.
Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked Compressor/Condensing Units CFC free & R-134 a eco friendly refrigerant.
Preset temperature 22C (FDA recommended).
Temperature is controlled by Electronic Digital Temperature Indicator Cum Controller fitted With Audio Visual Alarm incorporated with battery back which triggers in the event of fluctuation exceeding permitted tolerance. Unit is also fitted with Door Operated Alarm and Power Supply Failure Alarm, as a safety device.
Specially designed to accommodate Platelet Agitator.
Caster wheel mounted for easy portability.
Supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF PLATELET INCUBATOR

Model No.	PLT 142G
Approx Volume (Ltr)	150 ltr
Approximate Size (in Cuft.)	5.5
Chamber	Inner Chamber Made of Stainless Steel
Temperature	Preset at 22^°C
Temp. Controller	By Microprocessor Based PID Digital Temperature Indicator cum Controller with alarm facility Fitted with specially designed deviation alarm from the preset temperature, door open alarm and power failure alarm.
Temperature Recorder	Seven days circular Temperature chart recorder.
Specially designed	To accommodate Platelet Agitator
Temperature Alarm	Audio Visual Alarm
Display	LED Display
Relay	Solid state electronic relay with protective heat sink.
Battery Backup	Facility is provided
Illumination	By Fluorescent Lamp
Air Circulation	By forced convection system
Insulation	By High density insulation
Operations	Nearly silent operation with ultra-low vibration
High Voltage Protection	Through automatic voltage stabilizer (Optional)
Electric Supply	220/230V AC, 50/60Hz

OPTIONAL FEATURES OF PLATELET INCUBATOR

Printing Facility	By Built in Mini Printer to record temperature.
Regulated Voltage	By Voltage stabilizer

View Complete Details

Ask Latest Price & Details

Shaking Cum BOD Incubator

Orbital Shaking cum BOD Incubator (PLT-146)

APPLICATIONS OF ORBITAL SHAKING INCUBATOR cum BOD Incubator

"TANCO" brings the ultra-high-tech Triple walled Microprocessor controlled, solid-state Orbital Shaking Incubator down to earth.
Specially designed for Orbital Shaking under controlled Incubations / Temperature required for Tissue Cultures Fermentation Studies, & Ageing Tests., Life science applications & growth studies.

SALIENT FEATURES & CONSTRUCTION OF ORBITAL SHAKING INCUBATOR cum BOD Incubator

Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish.
Inner chamber made of STAINLESS STEEL SHEET (304 Grade).
Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber.
Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement.
Fitted with Universal Platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks.
Stationery shelves made of Stainless Steel (SS-304) for use of the unit as a standard B.O.D. Incubator, can be supplied at extra cost.
Door operated illumination lamp is fitted inside the chamber for easy visibility.
A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.
High grade PUF INSULATION between outer and inner chamber for minimal thermal losses.
Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked Compressor/Condensing Units CFC free & R-134 a eco friendly refrigerant.
Heating elements are placed in the path of moving air duly insulated from the body.
Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature provided with Volt meter on the panel to read the incoming voltage.
Caster wheel mounted for easy portability.
Supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF ORBITAL SHAKING INCUBATOR cum BOD Incubator

Model No.	PLT - 146
Usable Space in MM	600 X 600 X 600
Capacity	8 cu. Ft
Approx Volume (Ltr)	230
No. of Shelves	2
Temperature Range	5^°C above ambient to 60^°C (Resolution 0.1^°C)
Temp. Controller	By Microprocessor Based PID Digital Temperature Indicator cum Controller.
Shaking amplitude	25 mm.
RPM Display	Digital
Shaking Speed	Variable speed from 20 RPM to 250 RPM
Temp. Accuracy	+1^°C
Temp. Display:	LED Display for Set Value(SV) and Process Value (PV)
Relay	Solid state electronic relay with protective heat sink.
Air Circulation	By forced convection system
Insulation	By High density PUF /Glass Wool
Operations	Nearly silent operation with ultra-low vibration
High Voltage Protection	Through automatic voltage stabilizer (Optional)
Electric Supply	220/230V AC, 50/60Hz

OPTIONAL FEATURES OF ORBITAL SHAKING INCUBATOR cum BOD Incubator

LCD Controller with Data Logger	(16 x 2) with optional RS-485 communication ports, cables, window based software with inbuilt data recording.
Communication Port	Communication Port with interface and data cable to download data to your PC.
Timer	With reverse 0 - 24 hours for regulating hours of light and darkness including fitting at the top of incubator.
Shaking Frequency	Range 50 to 300rpm
Shaking Motion	By Permanent Magnet DC Drive for continuous operations.
Lotus Clamp Holders	Made of Stainless Steel (SS-304) (One set supplied as per user configuration)
Flask Configurations Available (any one set supplied with the unit)	36 Erlynmeyer Flasks of 100ml capacity each.
	24 Erlynmeyer Flasks of 250ml capacity each.
	16 Erlynmeyer Flasks of 500ml capacity each.
	9 Erlynmeyer Flasks of 1000ml capacity each.
Chamber sterilization	By U.V. germicidal tube.
Interior Illumination	By fluorescent tubes of for photosynthetic applications
Regulated Voltage	By Voltage Stabilizer Automatic

View Complete Details

Ask Latest Price & Details

Digital Photoelectric Colorimeter

Digital Photo Electric Colorimeter Eight Filter (EE-028)

APPLICATIONS of Digital Photoelectric Colorimeter

Photoelectric Colorimeter can easily measure the ability of any solution to absorb the light waves of various wavelengths. Photo electric colorimeter can be used to measure the growth rate of yeast or bacterial material.
Tancos Digital Photoelectric Colorimeter finds usage in Pharmaceutical & Diary industries which are also its largest buyers.

View Complete Details

Ask Latest Price & Details

Soxhlet Extraction Unit

Soxhlet Extraction Unit (PLT-175)

APPLICATIONS OF SOXHLET EXTRACTION UNIT

Tanco Soxhlet Extraction Unit is very useful to heat soxhlet Flasks.
It consists of Mild Steel housing provided with mantles and surface temperature is 300 degree Celsius.

SALIENT FEATURES & CONSTRUCTION OF SOXHLET EXTRACTION UNIT

Unit has two Vertical and two Horizontal rods with clamps and screws to hold the flasks.
consists of Mild Steel housing provided with mantles
surface temperature is 300 degree Celsius
Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.

View Complete Details

Ask Latest Price & Details

Incubator Bacteriological

Incubator Bacteriological (Memmert Type) (PLT-136)

APPLICATIONS OF BACTERIOLOGICAL INCUBATOR

Bacteriological Incubator (Memmert Type) Double walled is elegantly designed in various applications for microbiology, cell cultivation of animals and plants, food studies. Our Incubators stands for unparallel precise, even and gentle temperature control.
Double Walled Incubators (Memmert Type) is low cost options for various experiments in, industries, R&D labs, Pharmaceutical, Food & Beverage Industries and Institutions- in the field of Medical, Agricultural and Industrial Research used for Drying of slides, paraffin embedding, tissue culture work, incubation of antibody test, excellent for Microbiological determinations, crystallization studies and Incubation of hydroxyl steroids.

SALIENT FEATURES & CONSTRUCTION OF BACTERIOLOGICAL INCUBATOR

Outer chamber is made of Mild Steel duly powder coated.
Inner chamber made of ALUMINIUM or STAINLESS STEEL (304) sheet.
Forced convection system ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber.
Door has double viewing window to observe the sample placed inside the chamber without disturbing the thermal condition.
Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & Inner chamber.
Door Gasket fixed on the double walled door for proper sealing.
Fitted with heavy hinges with a ball catcher, spring loaded door closing device. Door is duly insulated.
Adjustable two ventilation slides control inner air / vapour circulation.
Beaded heating elements made of high quality Nichrome/Kanthal wire are placed in ribs, at bottom and sides for uniform heat distribution.
Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves.
Temperature is controlled by thermostat from 50C to100C 1C. fitted on the front panel for easy operations.
Different programme functions can be designed for a wide variety of applications, and even when used
Temperature is displayed by Digital LED with SV and PV display at front of the oven.
Front Panel is provided with ON/OFF switch, temperature controller and indicators
Supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF BACTERIOLOGICAL INCUBATOR

Model No.	INC 1	INC 2	INC 3	INC 4	INC 5	INC 6	INC 7	INC 8
Inner Chamber in MM (W x H x D)	300x300x300	355x355x355	455x455x455	455x605x455	455 x 605 x 605	605x605x605	605x910x455	605x910x605
Inches Conversion	12 x 12 x 12	14 x 14 x 14	18 x 18 x 18	18 x 24x 18	18 x 24 x 24	24 x 24 x 24	24 x 36 x 18	24 x 36 x 24
Capacity	28 ltrs	43 ltrs	90 ltrs	105 ltrs	120 ltr	215 ltrs	240 ltrs	325 ltrs
Heating Load	0.50 KW	0.50 KW	1.00 KW	1.00 KW	1.50 KW	1. 50 KW	1.50 KW	2.00 KW
No. of Shelves	2	2	2	2	2	2	3	3
Temperature Range	5^°C above ambient to 70^°C
Temp. Controller	Hydraulic type capillary thermostat.
Temp. Accuracy	+1^°C.
Temp. Display	Thru L-shaped prismatic thermometer.

OPTIONAL FEATURES OF BACTERIOLOGICAL INCUBATOR

Air Circulation	By F. H. P. motor fitted with blower
Timer Facility	By Mechanical Timer up to 2 Hours.
Fan Speed	Can be regulated by speed regulator.

View Complete Details

Ask Latest Price & Details

Vortex Shaker

Vortex Shaker/Test Tube Shaker/ Cyclomixer (PLT-202)

APPLICATIONS of Vortex Shaker

A vortex mixer- Cyclometer is a simple device used commonly in laboratories to mix small vials of liquid. Vortex mixture- Cyclometer is used commonly in Bioscience & Microbiology laboratory. It is also used extensively in Pharmaceutical Industry. Tanco is one of the largest supplier of Vortex Mixer- Cyclometer in the World.
Tanco has been associated with number of prestigious institution and supplied to number of Multinational Corporations

View Complete Details

Ask Latest Price & Details

Tissue Flotation Bath

Model No. TFB - 1
Bath Size (Inner) (Dia. x Depth) 225 x 70 mm
Temperature Controlled by imported capillary type thermostat
Temperature Range +5 0 C to 70°C
Temperature Accuracy ± 2°C.

Tissue Flotation Bath (PLT-122)

APPLICATIONS OF Tissue Flotation Bath

Double walled Tissue floatation water bath is used for precise control of different samples at constant temperature most ideal for Histological, chemical, clinical and bacteriological laboratories used to stretch and dry cut tissues.
It is ideal for tissue culture, enzyme reactions fermentation tissue section processing etc. for preparing distortion less and wrinkle free tissue specimens.
Its exact temperature regulation ensures evenly stretched cuttings that are clearly visible in the anodized bath.
The cuttings are carefully dried on the warmed rim of the bath.
Offers highest level of performance, flexibility and control for most demanding applications.
Exact temperature constancy of 2C.

SALIENT FEATURES & CONSTRUCTION OF Tissue Flotation Bath

Inner tank (Single piece) made of black anodized aluminum.
Housing made of powder coated aluminum.
Front panel consist of temperature regulator knob, mains switch and pilot lamp.
Inside black and outer surface finished in powder paint, with wide enough rim for drying the wet slides.
Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & inner tank.
Heating elements are positioned in the floor and side walls & a natural mixing of the medium arises, providing better temperature distribution in the bath.
Temperature is controlled by imported capillary type thermostat, from ambient to 70C with an accuracy of +2C.
The low 110mm depth of the bath allows comfortable and safe working.
Supplied with Dust Guard Lid made of black anodized aluminum.

View Complete Details

Ask Latest Price & Details

Orbital Shaking Incubator

Orbital Shaking Incubator Table Top (PLT-144)

APPLICATIONS OF ORBITAL SHAKING INCUBATOR

"TANCO" brings the ultra-high-tech Triple walled Microprocessor controlled, solid-state Orbital Shaking Incubator down to earth.
Specially designed for Orbital Shaking under controlled Incubations / Temperature required for Tissue Cultures Fermentation Studies, & Ageing Tests., Life science applications & growth studies.

SALIENT FEATURES & CONSTRUCTION OF ORBITAL SHAKING INCUBATOR

Table Top Model.-can be placed easily.
Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish.
Inner chamber made of STAINLESS STEEL SHEET (304 Grade).
Top Cover made of acrylic sheet enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.
Fitted with Universal Platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks.
High grade Glass Wool INSULATION between outer and inner chamber for minimal thermal losses.
Heating elements are placed in the path of moving air duly insulated from the body.
Control panel having all controls and circuitry are housed at the front panel fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature.
Supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF ORBITAL SHAKING INCUBATOR

Model No.	OSI - 1	OSI - 2
Usable Space in MM	400 x 400	550 x 550
Approx Volume (Ltr)	100	200
Temperature Range	Temperature Range
Temp. Controller	By Microprocessor Based PID Digital Temperature Indicator cum Controller.
Shaking Motion	By Permanent Magnet DC Drive for continuous operations.
Shaking amplitude	25 mm.
Lotus Clamp Holders	Made of Stainless Steel (SS-304) (One set supplied as per user configuration)
RPM Display	Digital
Shaking Speed	Variable speed from 20 RPM to 250 RPM
Temp. Accuracy	+1^°C
Temp. Display:	LED Display for Set Value(SV) and Process Value (PV)
Relay	Solid state electronic relay with protective heat sink.
Air Circulation	By forced convection system
Insulation	By High density PUF /Glass Wool
Operations	Nearly silent operation with ultra-low vibration
Electric Supply	220/230V AC, 50/60Hz

OPTIONAL FEATURES OF ORBITAL SHAKING INCUBATOR

Flask Configurations Available (any one set supplied with the unit)	36 Erlynmeyer Flasks of 100ml capacity each.
	24 Erlynmeyer Flasks of 250ml capacity each.

View Complete Details

Ask Latest Price & Details

Hybridization Incubator

Hybridization Incubator (PLT-138)

APPLICATIONS OF HYBRIDIZATION INCUBATOR

Hybridization oven/incubator is ideal for sterile laboratory testing and where the integrity of the sample must be preserved while heating it to the exact temperature for the right period of time. These simple and versatile instruments are found in applications including nucleic acid hybridization such as Northern (RNA) blots/hybridization, Southern (DNA) blots/hybridization, Western (Protein) blots, and molecular biology assays. Used in life science laboratories to perform membrane hybridization with a hybridization incubator. Hybridization incubators, also known as hybridization ovens, provide defined temperature control, agitation, and consistency throughout the incubator chamber.

SALIENT FEATURES & CONSTRUCTION OF HYBRIDIZATION INCUBATOR

Temperature range from ambient (+5C) to 90C 0.5C controlled by P.I.D. controller. Chamber made of S.S. 304 is provided with air circulation fan. Rotator is inbuilt and is provided with racks to hold six bottles (60 mm Dia 200 mm Depth) at a variable speed of 2 to 16 rmp.

Hybridizer and UV cross linked in one self-contained space-saving unit
Designed for effective, efficient cross linking and hybridization at one location with each section can operate at the same time
Precise temperature control, ambient to 99.9C and variable speed control at 10 to 18 rpm
Multiple bottle sizes fits up to ten with three different sized bottle configurations

The hybridization oven operates with microprocessor controls to monitor temperature and rotation speed of bottles for dynamic mixing capability. This is ideal for creating the optimum conditions needed for cDNA library screenings, primer synthesis and all nucleic acid hybridization. The UV crosslinker provides an extremely uniform shortwave radiation exposure chamber for bonding nucleic acid to medium, typically done prior to hybridization. UV output is measured by an internal sensor and controlled by an on-board microprocessor, enabling accurate, reliable and safe laboratory crosslinking. Preset or user-selected UV energy or UV time exposure are selected via touch pad. What's include: bottle carousel, one large bottle 35 x 300mm.

Outer chamber is made of Mild Steel duly powder coated.
Inner chamber made of ALUMINIUM or STAINLESS STEEL (304) sheet.
Forced convection system ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber.
Door has double viewing window to observe the sample placed inside the chamber without disturbing the thermal condition.
Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & Inner chamber.
Door Gasket fixed on the double walled door for proper sealing.
Fitted with heavy hinges with a ball catcher, spring loaded door closing device. Door is duly insulated.
Adjustable two ventilation slides control inner air / vapour circulation.
Beaded heating elements made of high quality Nichrome/Kanthal wire are placed in ribs, at bottom and sides for uniform heat distribution.
Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves.
Temperature is controlled by electronic digital temperature indicator cum controller from 50C to100C 1C. fitted on the front panel for easy operations.
Different programme functions can be designed for a wide variety of applications, and even when used
Temperature is displayed by Digital LED with SV and PV display at front of the oven.
Front Panel is provided with ON/OFF switch, temperature controller and indicators.
Supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF HYBRIDIZATION INCUBATOR

Model No.	INE 1	INE 2	INE 3	INE 4	INE 5	INE 6	INE 7	INE 8
Inner Chamber in MM (W x H x D)	300x300x300	355x355x355	455x455x455	455x605x455	455 x 605 x 605	605x605x605	605x910x455	605x910x605
Inches Conversion	12 x 12 x 12	14 x 14 x 14	18 x 18 x 18	18 x 24x 18	18 x 24 x 24	24 x 24 x 24	24 x 36 x 18	24 x 36 x 24
Capacity	28 ltrs	43 ltrs	90 ltrs	105 ltrs	120 ltr	215 ltrs	240 ltrs	325 ltrs
Heating Load	0.50 KW	0.50 KW	1.00 KW	1.00 KW	1.50 KW	1. 50 KW	1.50 KW	2.00 KW
No. of Shelves	2	2	2	2	2	2	3	3
Temperature Range	5^°C above ambient to 70^°C
Temp. Controller	By Microprocessor Based PID Digital Temperature Indicator cum Controller.
Temp. Sensitivity	+1^°C.
Air Circulation	By forced convection system
Relay	Solid state electronic relay with protective heat sink.
Auto Tuning System	System is compatible with auto tuning system

View Complete Details

Ask Latest Price & Details

Bacteriological Incubator

Material Aluminum, Metal, Mild Steel, Stainless Steel
Certification CE Certified, ISI Certified, ISO Certified
Application Industrial Use, Medical Use
Color Black, Blue, Green, Purple, White
Voltage 110V, 220V
Condition New, Used
Frequency 50Hz, 60Hz
Automation Grade Fully Automatic, Semi Automatic

View Complete Details

Ask Latest Price & Details

Bod Incubator Automatic

We are offering Bod Incubator Automatic. APPLICATIONS "TANCO" brings the ultra-high-tech Triple walled Microprocessor controlled, solid-state heatingcooling incubator (BOD Incubator) down to earth.Specially designed for incubation of Biochemical Oxygen demand on water and sewage; can be used as environmental study and growth chamber by incorporating lighting and humidification system.Used in various applications for microbiology, cell cultivation of animals, plants & food studies- where experiments requiring low temperature conditions. Used for microorganism or activation, good storage and desalting process of enzyme extracts and for preservation of vaccines, insulin, level extracts, a* 15C for serological and complement fixation tests for enzymatic digestion process.

View Complete Details

Ask Latest Price & Details

GMP Bacteriological Incubator

Incubator Bacteriological GMP Model (PLT-136 B)

APPLICATIONS OF BACTERIOLOGICAL INCUBATOR GMP

Bacteriological Incubator (Memmert Type) Double walled is elegantly designed in various applications for microbiology, cell cultivation of animals and plants, food studies. Our Incubators stands for unparallel precise, even and gentle temperature control.
Double Walled Incubators (Memmert Type) is low cost options for various experiments in, industries, R&D labs, Pharmaceutical, Food & Beverage Industries and Institutions- in the field of Medical, Agricultural and Industrial Research used for Drying of slides, paraffin embedding, tissue culture work, incubation of antibody test, excellent for Microbiological determinations, crystallization studies and Incubation of hydroxyl steroids.

SALIENT FEATURES & CONSTRUCTION OF BACTERIOLOGICAL INCUBATOR GMP

Outer Body & Inner chamber Complete made of Stainless Steel.
Forced convection system ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber.
Door has double viewing window to observe the sample placed inside the chamber without disturbing the thermal condition.
Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & Inner chamber.
Door Gasket fixed on the double walled door for proper sealing.
Fitted with heavy hinges with a ball catcher, spring loaded door closing device. Door is duly insulated.
Adjustable two ventilation slides control inner air / vapour circulation.
Beaded heating elements made of high quality Nichrome/Kanthal wire are placed in ribs, at bottom and sides for uniform heat distribution.
Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves.
Temperature is controlled by electronic digital temperature indicator cum controller from 50C to100C 1C. fitted on the front panel for easy operations.
Different programme functions can be designed for a wide variety of applications, and even when used
Temperature is displayed by Digital LED with SV and PV display at front of the oven.
Front Panel is provided with ON/OFF switch, temperature controller and indicators
Supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF BACTERIOLOGICAL INCUBATOR GMP

Model No.	ING 1	ING 2	ING 3	ING 4	ING 5	ING 6	ING 7	ING 8
Inner Chamber in MM (W x H x D)	300x300x300	355x355x355	455x455x455	455x605x455	455 x 605 x 605	605x605x605	605x910x455	605x910x605
Inches Conversion	12 x 12 x 12	14 x 14 x 14	18 x 18 x 18	18 x 24x 18	18 x 24 x 24	24 x 24 x 24	24 x 36 x 18	24 x 36 x 24
Capacity	28 ltrs	43 ltrs	90 ltrs	105 ltrs	120 ltr	215 ltrs	240 ltrs	325 ltrs
Heating Load	0.50 KW	0.50 KW	1.00 KW	1.00 KW	1.50 KW	1. 50 KW	1.50 KW	2.00 KW
No. of Shelves	2	2	2	2	2	2	3	3
Temperature Range	5^°C above ambient to 70^°C
Temp. Controller	By Microprocessor Based PID Digital Temperature Indicator cum Controller.
Temp. Sensitivity	+1^°C.
Air Circulation	By forced convection system
Relay	Solid state electronic relay with protective heat sink.
Auto Tuning System	System is compatible with auto tuning system

OPTIONAL FEATURES OF BACTERIOLOGICAL INCUBATOR GMP

Controlling of Temperature	By Profile (Micro Programmable Controller)
Audio Alarm System	Activates at end of cycle Buzzer.
Timer Facility	Can be in built with Digital Electronic Timer
Communication Port	RS - 485 with Window based software
PLC Based Control Systems	With Touch Screen Display with Direct Thermal / Dot Matrix Printer.
LCD Controller with Data Logger	16 x 2) with optional RS-485 communication ports, cables, window based software with inbuilt data recording.

View Complete Details

Ask Latest Price & Details

Humidity AND Temperature Cabinet

Humidity & Temperature Cabinet (PLT-261)

APPLICATIONS OF HUMIDITY & TEMPERATURE CONTROL CABINET

TANCO brings the ultra-high-tech Triple walled Microprocessor controlled Humidity & Temperature Control Cabinet (Refrigerated) forced convention type.
Specially designed for carrying out different quality control test under controlled conditions of temperature and humidity for motors, various electrical fittings, electronic circuits and components, cloth and paper etc. & in various research labs.

SALIENT FEATURES & CONSTRUCTION OF HUMIDITY & TEMPERATURE CONTROL CABINET

Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish.
Inner chamber made of STAINLESS STEEL SHEET (304 Grade).
Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber.
Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement.
Inner chamber has SS angels for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves.
A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.
High grade PUF INSULATION between outer and inner chamber for minimal thermal losses.
Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked Compressor/Condensing Units CFC free & R-134 a eco friendly refrigerant.
Heating is done by indirect heating system by air heaters made of stainless steel placed in the path of moving air in the chamber .
Temperature Range. T emperature ranges of our humidity cabinet models are 100C to 600C.
Temperature controlled by microprocessor based temperature controller having LED display with an accuracy of +10C fitted with PT-100 sensor (Resolution 0.10C)
Humidity System: Humidity is generated by steam injection system consist of boiler tank, placed below the chamber fitted with boiler heater.
Humidity Range: 50% of 90% & controlled controlled by mean of an electronic humidity controller cum indicator with an accuracy of + 3 to 5%RH.
Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set V alue (SV) & Process V alue (PV) to select any desired temperature & humidity controller cum indicator provided with Volt meter on the panel to read the incoming voltage.
Caster wheel mounted for easy portability
Supplied with cord and plug.
Operating Voltage: 220 Volts AC (50 Hz).

TECHNICAL SPECIFICATIONS & ORDERING INFORMATION OF HUMIDITY & TEMPERATURE CONTROL CABINET

Model No.	HCR 1	HCR 2	HCR 3
Usable Space in mm( W x H x D)	450 x 450 x 700	600 x 600 x 600	600 x 600 x 900
Capacity	5.2 Cuft	8 Cuft	12 Cuft
Approx Voulme	150 Ltr.	227 Ltr.	340 Ltr
No. of Shelves	2	2	3
Temperature Range	10^°C to 60^°C (Resolution 0.1^°C)
Temp. Controller	By Microprocessor Based PID Digital T emperature Indicator cum Controller.
Temp. Accuracy	±1^°C
Humidity Range	50% to 90% at cool temperature
Humidity Accuracy	+ 3 to 5%RH
Display	LED Display for Set V alue(SV) and Process V alue (PV)
Relay	Solid state electronic relay with protective heat sink.
Air Circulation	By forced convection system
Insulation	By High density PUF insulation
Operation	Nearly silent operation with ultra-low vibration
Voltage Indicator	By Volt Meter fitted on Panel
High Voltage Protection	Through automatic voltage stabilizer (Optional)
Electric Supply	220/230V AC, 50/60Hz

OPTIONAL FEATURES OF HUMIDITY & TEMPERATURE CONTROL CABINET

PLC Based Control System	With Touch Screen Display with Direct Thermal / Dot Matrix Printer.
LCD Controller with Data Logger	(16 x 2) with optional RS-485 communication ports, cables, window based software with inbuilt data recording
Communication Port	Communication Port with interface and data cable to download data to your PC
Regulated Voltage	By Voltage Stabilizer Automatic

View Complete Details

Ask Latest Price & Details

Education Equipment
Get Best Quote
Incubator
Get Best Quote
Incubators
Get Best Quote
Laminar Air Flow Cabinet
Get Best Quote
Ovens
Get Best Quote
Bod Incubators
Get Best Quote

Tell Us What are you looking for? Will call you back

Contact Us

Aman Tandon (P. L. Tandon & Co.)
205-B, Apra Plaza Commercial Complex, Road No.44, Pitampura, New Delhi-110034, (India)
Share us via
Found Something Wrong with this Listing? Report Here.

View Contact No.

Our Product / Services

Laboratory Equipments 22 Products available
Measuring Instruments & Equipment 13 Products available
Tables 12 Products available
Beds 9 Products available
Trolleys 7 Products available
Lab Instrument 6 Products available
Clean Room Equipment 6 Products available
Industrial Ovens & Furnaces 5 Products available
Sterilizers 5 Products available
Autoclaves 4 Products available
Others Products / Services 134 Products / Services available