Product / Services
Post Buy Requirement
PL

P. L. Tandon & Co.
Pitampura, Delhi

Add Review
Call Now Call Now

Our Product / Services

  1. Laboratory Equipments 22 Products available
  2. Measuring Instruments & Equipment 13 Products available
  3. Tables 12 Products available
  4. Beds 9 Products available
  5. Trolleys 7 Products available
  6. Lab Instrument 6 Products available
  7. Clean Room Equipment 6 Products available
  8. Sterilizers 5 Products available
  9. Industrial Ovens & Furnaces 5 Products available
  10. Autoclaves 4 Products available
  11. Others Products / Services 162 Products / Services available

Autoclaves

We offer a complete product range of Vertical Autoclave, Horizontal Autoclave, Portable Autoclave, Table Top Portable Autoclave and Autoclaves

Vertical Autoclave

Vertical Autoclave
Vertical Autoclave (PLT-101)
APPLICATIONS of Vertical Autoclave
  • Autoclave Vertical are most ideal for critical applications requiring assured and reliable total destruction of all living micro- organisms
  • Autoclave Vertical is low cost options for general sterilization ideal tool for Laboratories, Hospitals, Nursing Homes, R&D labs etc, Pharmaceutical, Food & Beverage Industries and Institutions
SALIENT FEATURES & CONSTRUCTION of Vertical Autoclave
  • Inner & Outer Chamber, constructed from S. S. 304 Grade
  • Bucket / Basket Made of Stainless Steel
  • Water Level Indicator
  • Lid Closing by Radial Locking System
  • Sealing of Lid by Neoprene Rubber Gasket
  • Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve.
  • Operating range from 15psi to 20psi pressure
  • Sterilizing Temperature up to 1340C
  • Tested up to 2.5 times of required Pressure
  • Voltage: 220 Volts AC (50 Hz)

PARAMETERS MODEL ACV-1 MODEL ACV-2 MODEL ACV-3 MODEL ACV-4 MODEL ACV-5
Inner Dimensions (Dia x Height) 250x450mm 300x500mm 350x550mm 450x600mm 550x750mm
Inches Conversion 10 x 18 12 x 20 14 x 22 18 x 24 22 x 30
Capacity 22 ltrs 40 ltrs 50 ltrs 98 ltrs 152 ltrs
Working Load 2.0 KW 2.0 KW 3.0 KW 4.0 KW 6.0 KW
Gasket Made of Neoprene Rubber
Sterilizing pressure 1.2 kgf / cm (15psi)at 121°c
Pressure Gauge 0-2.1 kgf / cm² (30 psi)
Operating pressure From 15 to 20psi (Adjustable)
Inner Pressure Tank Stainless Steel (SS-304)
Top Lid Mild Steel Plate lined with Stainless Steel from inside
Basket Made of Stainless Steel
Lid Tightening Radial Locking system worked by handle
Lid Opening Paddle lifting device
Water Level Indicator Fitted on the outer chamber
Boiler – Hydraulically Tested Upto +40 psi
Accuracy + 3 psi
Safety Device Spring Loaded Type
Water Draining System Hand Operated Valve
Heating BY ISI Marked Immersion Heaters
Steam & Vacuum Release By Valve
Power Supply 220/230V AC, 50/60Hz
View Complete Details
Ask Latest Price & Details
Horizontal Autoclave

Horizontal Autoclave
Horizontal autoclave (plt-102)
applications of horizontal autoclave
  • double walled horizontal autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro- organisms it is based on the principle that microbiological action of saturated steam at elevated temperature is rapid and through.
  • autoclave horizontal is low cost options for general sterilization ideal tool for laboratories, hospitals, nursing homes, agricultural r&d labs etc, pharmaceutical, food & beverage industries and institutions.
  • suitable for sterilizing hospital dressings, linen, rubber, plastic goods, surgical instruments, glasswares, utensils etc.
salient features & construction of horizontal autoclave
  • double walled unit horizontally mounted on a sturdy, heavy m.s. Duly painted or stainless steel tubular stand.
  • chamber & boiler (steam generator) are constructed from s.s. 304 grade.
  • lid (single piece door) made of stainless steel tightened by radial locking system.
  • sealing of lid by neoprene rubber gasket
  • chamber insulated by mineral/glass wool to minimise the heat losses and is covered by polished stainless steel sheet.
  • fitted with pressure gauge, safety valve and steam release valve.
  • sterilizing temperature up to 1340c.
  • sterilizing pressure : 1.2 to 1.5 kg/cm2 (15 psi to 22psi)
  • hydraulically tested up to 40 psi.
  • these autoclaves work on the principle of downward displacement of air which is the most economical method of obtaining sterilization
  • fitted with separate valves for injecting the steam into the main chamber.
  • fitted with automatic vacuum breaker to break the vacuum in case of formation of vacuum due to steam condensation.
  • fitted with automatic low water level cut-off device for prevention of heaters.
  • fitted with automatic pressure control switch to economizes power consumption by reducing frequent opening of the steam release valve. It cuts off the power supply to heaters when the set pressure is achieved and re-energizes the heating elements when pressure falls below the set point.
  • fitted with dial thermometer to indicate the inner chamber temperature.
  • voltage: 220 volts ac (50 hz).

PARAMETERS MODEL ACH - 1 MODEL ACH - 2 MODEL ACH - 3 MODEL ACH - 4 MODEL ACH - 5 MODEL ACH - 6
Inner Dimensions (Dia x Height) 250x450mm 300x500mm 350x550mm 450x600mm 550x750mm 1100x400
Inches Conversion 10 x 18 12 x 20 14 x 22 18 x 24 22 x 30 44 x 16
Capacity 22 ltrs 36 ltrs 50 ltrs 98 ltrs 152 ltrs 200 ltrs
Working Load 2.0 KW 2.0 KW 3.0 KW 6.0 KW 7.5 KW 9.0 KW
Working Pressure Gauge 10-20 psi
Pressure Gauge 0-30 psi
Lid Quality Heavy mild steel sheet lined with Stainless steel
Lid Tightening Radial locking system worked by handle
Gasket Made of Neoprene Rubber
Sterilizing Pressure 1.2 kgf / cm (15psi)at 121°c
Pressure Gauge 0-2.1 kgf / cm² (30 psi)
Operating pressure From 15 to 20psi (Adjustable)
Inner Pressure Tank Stainless Steel (SS-304)
Basket Made of Stainless Steel
Water Level Indicator Fitted on the outer chamber
Boiler - Hydraulically Tested Upto +40 psi
Accuracy + 3 psi
Safety Device Spring Loaded Type
Water Draining System Hand Operated Valve
Heating BY ISI Marked Immersion Heaters
Steam & Vacuum Release By Valve
Power Supply 220/230V AC, 50/60Hz

  OPTIONAL FEATURES of Horizontal Autoclave  
Present Pressure Operation Automatic Switch Piezostat (Pressure Control Switch)
Heater Safety Automatic cut-off Device
Pre-set Time Operation By Mechanical / Digital Timers Analogue 0-60 minutes
Temperature Display By Dial Type / Digital Temperature Indicators with LED display.
Temperature Recording Thermograph with / without digital display - Circular Type
Dry Sterilization Triple wall arrangement

View Complete Details
Ask Latest Price & Details
Portable Autoclave

Portable Autoclave
  • Internal Dimension (Dia x Height) 300 x 300 mm
  • Gasket (Jointless) Neoprene
  • Heat Load 2.0 KW
  • Chamber Wall Single
  • Exhaust of Pressure Manually through aexhaust valve
  • Pressure Gauge 0-2.1 kgf/cm² (30 psi)
  • Sterilizing Pressure 0-2.1 kgf/cm² (15 psi) at 121°C.
  • Pressure Vessel Aluminum / Stainless Steel (SS-304)
  • Power Supply 220/230V AC, 50/60 Hz
Portable Autoclave (PLT-105 A)
APPLICATIONS of Portable Autoclave
  • Portable Autoclave is low cost device for general sterilization ideal for doctors, nursing homes, laboratories, dentists etc.
  • Mainly used as general laboratory equipment where samples in small batches are required to be sterilized.
  • Light weight & easy to carry.
SALIENT FEATURES & CONSTRUCTION of Portable Autoclave
  • Available Electrically / Gas Heated, Single walled, (joint less body) complete with Stand in Aluminum & Stainless Steel Models.
  • Hydraulically tested upto 40 psi for user safety.
  • Spring loaded safety valve for pressure adjustment and a dead weight valve works as a safety device.
  • Wing Type Simple and easy "Press & turn" system of closing lid for single walled units.
  • Lid is fitted with pressure gauge, safety valve and manual exhaust valve.
  • Vacuum breaker-cum-purge valve works as a safety device.
  • Moulded neoprene rubber gasket.

View Complete Details
Ask Latest Price & Details
Table Top Portable Autoclave

Table Top Portable Autoclave
Table Top Portable Autoclave Complete SS (PLT-105 I)
APPLICATIONS of Table Top Portable Autoclave
  • TANCO Table Top Autoclave fully Automatic Microprocessor Controlled Complete SS having radial Locking System Provided with Pressure gauge
  • TANCO Table Top Autoclave has (Built-in) safety device, S.S. Rack, Water level indicator and Neoprene rubber gasket
SALIENT FEATURES & CONSTRUCTION of Table Top Portable Autoclave
  • Having different temperature & time settings for: 118 C to 134 C
  • Provided with built in thermometer & time adjustment facility supplied with SS rack
  • Workable on 220/230 Volts AC.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.