Our Products
Vertical Centrifugal process pump can be used in any installation or specially where the saving of space is important factor or mechanical seal not required. These pumps are designed for use where the liquid handled to be of highly corrosive nature or where non-adherence of product or zero metallic contamination is must.
These pumps are equally ideal for continuous or intermittent service for hanling conrrosive as well as ultra pure chemicals without fear of corrosion or contamination. All components in the watted end of the pump are moulded of engineered plastic. These pumps are not only less costly than high alloy or exotic metal pumps, but they may be used safely in service where metal pumps are completely inadequate.
Chemical ResistantAll contact parts are made from Polypropylene with PTFE sealing-rings. Provides excellent resistance to corrosive and hazardous chemical liquids like HCL, H2SO4 (30% TO 80%), HNO3 . Specially designed to handle nearly all corrosives and erosives easily and efficiently for continuous and intermitent service.
High Temperature ServiceMaximum working temperature is 1100c.
LengthPumps lengths lengths available from 1' to 12' with flowrate upto 50 m3/h or 50 meterhead. Higher capacities and head available.
ModelsAvailable in conventional or tailormade configuration. Several models such as suction extension with float switch, (auto on/off device)- also available with Polypropylene mounting plates.
Special FeaturesThese pumps are in extensive use in the fields of
Plasto Process pump is a horizontal single end suction standardized back pull out process pump. PPC series process pupms are supplied with mechanical seal/gland packing arrangement covering 85% of the chemical industries requirement. The pumps are manufactured from polypropylene copolymer-a chemically inert thermoplastic by the use of an exclusive moulding process. This pumps give you unusual protection against highly corrosive chemicals. The solid molded casing and impeller ensure a smooth running pump for long life and a minimum of wear. all pumps , shafts are fitted with sleeves of different materials compatible with the liquid handled.
Plasto Process pump is a horizontal single end suction standardized back pull out Process pump in accordance with ISO2858/DIN24256. The PCF series process pumps are single piece, self venting radially split volute casing with vortex discharge, close redial impellers have back vanes for hydraulic balancing & reducing stuffing box pressure. Dry shaft construction preventing liquid contact with shaft.
Monoblock type PP Pumps which are small, economical and easy to use and maintain. Ideal for transfer of corrosive liquids, pharmaceutical products, food and dairy products, chemical transfer and filtration etc. These pumps are specially designed to give high head & capacity. Std. pumps are available with PTFE gland packing and NFLP motor. Flameproof motor can be supplied on request.
At 2900 RPM | Max, Temp. 80o C | |||
Pump Model | HP | Size | Max. Capa. LMP | Max. Head Mtrs. |
PP-25 | 0.25 | ½" X ½" | 50 | 8 |
PP-50 | 0.50 | 1" X 1" | 100 | 12 |
PP-100 | 1 | 1" X 1" | 150 | 18 |
PP-150 | 1.5 | 1½" X 1" | 200 | 22 |
PP-200 | 2 | 1½" X 1¼" | 300 | 25 |
Note :Special Pumps for Higher Capacity and Head available on request.
Material Of Construction
Standard |
Options | ||
Casting | - |
Cast iron FG 260 |
SS-304/316/gunmetal |
Impeller | - |
Cast iron FG 260 |
SS-304/316/gunmetal |
Shaft | - |
EN-8 |
SS-410/304/316 |
Sleeve | - |
SS-410 |
SS-304/316 |
Gland | - |
TIWA |
Mechanical seal, PTFE |
MODEL |
MOTOR |
PIPE |
SPEED |
TOTAL HEAD IN METERS |
Solid Hand-ling |
|||||||||||||||||||
6 | 8 | 10 | 12 | 14 | 15 | 16 | 18 | 19 | 20 | 22 | 24 | 25 | 26 | 28 | 30 | 32 | 34 | 36 | ||||||
DISCHARGE LITERS PER SECOND |
||||||||||||||||||||||||
MP-0 | 0.75 | 1.00 | 40X40 | 2850 | 5.1 | 4.6 | 4.1 | 3.5 | 2.5 | 1.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | 7.0 |
MP-1 | 1.50 | 2.00 | 40X40 | 2850 | - | - | 6.5 | 5.7 | 4.8 | 4.3 | 3.8 | 2.5 | 1.7 | 0.8 | - | - | - | - | - | - | - | - | - | 8.5 |
MP-2 | 2.20 | 3.00 | 50X50 | 2900 | - | - | 9.4 | 8.9 | 8.1 | 7.7 | 7.3 | 6.3 | 5.7 | 5.1 | 3.9 | 2.4 | 1.6 | 0.7 | - | - | - | - | - | 10.5 |
MP-3A | 3.70 | 5.00 | 80X80 | 2900 | - | - | - | - | - | - | - | - | 9.6 | 8.8 | 8.0 | 7.6 | 7.2 | 6.5 | 5.7 | 4.9 | 3.7 | 2.1 | 7.0 | |
MP-3 | 5.50 | 7.50 | 80X80 | 2900 | - | - | - | - | - | - | - | - | - | 15.4 | 15.0 | 14.4 | 14.0 | 13.5 | 11.9 | 10.0 | 7.7 | 5.1 | 3.2 | 14.5 |
MP-3L | 3.70 | 5.00 | 80X80 | 1450 | 20.0 | 18.7 | 17.3 | 15.7 | 1.5 | 11.7 | 9.6 | 5.4 | - | - | - | - | - | - | - | - | - | - | - | 15.5 |
MP-4LA | 7.50 | 10.00 | 100X100 | 1450 | - | - | 34.9 | 32.7 | 3.0 | 28.8 | 27.5 | 24.4 | 22.8 | 21.3 | 17.2 | 12.9 | 10.0 | 6.7 | - | - | - | - | - | 18.5 |
MP-4L | 9.30. | 12.50 | 100X100 | 1450 | - | - | 42.3 | 39.0 | 35.7 | 34.3 | 32.6 | 29.5 | 27.9 | 26.2 | 22.8 | 18.6 | 16.2 | 13.4 | 5.7 | - | - | - | - | 23.0 |
MP-6LA | 15.00 | 20.00 | 150X150 | 1450 | - | - | 66.1 | 63.1 | 59.4 | 57.3 | 54.8 | 48.8 | 45.4 | 42.2 | 34.1 | 23.7 | - | - | - | - | - | - | - | 34.0 |
MP-6L | 18.70 | 25.00 | 150X150 | 1450 | - | - | 74.0 | 71.8 | 67.9 | 65.9 | 63.8 | 58.3 | 55.2 | 51.7 | 44.8 | 33.7 | 27.3 | 19.7 | - | - | - | - | - | 40.0 |
Performance are at 2900/1450 RPM, 50/60 Hz and tested with Clear water.
Due to Constant R & D activity, detail's are subject to change without prior Notice.
Engine CoupledMODEL |
MOTOR |
PIPE |
SPEED |
TOTAL HEAD IN METERS |
Solid Hand-ling |
|||||||||||||||||||
6 | 8 | 10 | 12 | 14 | 15 | 16 | 18 | 19 | 20 | 22 | 24 | 25 | 26 | 28 | 30 | 32 | 34 | 36 | ||||||
DISCHARGE LITERS PER SECOND |
||||||||||||||||||||||||
MP-3l | 4.00 | 6.00 | 80X80 | 1500 | - | - | - | 17.5 | 15.3 | 13.9 | 12.3 | 8.4 | 5.8 | 3.4 | - | - | - | - | - | - | - | - | - | 15.5 |
MP-3l | 9.00 | 12.00 | 80X80 | 1800 | - | - | - | - | - | 22.3 | 21.9 | 20.5 | 19.7 | 18.8 | 16.5 | 13.6 | 11.9 | 10.0 | 5.9 | - | - | - | - | 15.5 |
MP-4LA | 9.00 | 12.00 | 100X100 | 1500 | - | - | - | 36.0 | 33.6 | 32.3 | 30.9 | 28.1 | 26.4 | 24.8 | 21.3 | 17.0 | 14.3 | 11.3 | - | - | - | - | - | 18.5 |
MP-4L | 10.50 | 14.00 | 100X100 | 1500 | - | - | - | 41.2 | 38.8 | 37.9 | 35.9 | 33.8 | 32.1 | 30.3 | 26.2 | 21.3 | 18.3 | 15.8 | 9.6 | - | - | - | - | 23.0 |
MP-6LA | 16.50 | 22.00 | 150X150 | 1500 | - | 67.8 | 65.9 | 63.8 | 61.9 | 59.0 | 53.3 | 51.5 | 47.8 | 40.8 | 32.6 | 28.1 | 22.3 | - | - | - | - | - | 34.0 | |
MP-6L | 19.50 | 26.00 | 150X150 | 1500 | - | - | 77.1 | 74.2 | 71.7 | 70.6 | 67.9 | 62.7 | 61.8 | 56.7 | 50.5 | 41.9 | 38.1 | 31.8 | - | - | - | - | - | 40.0 |