PLANET METROLOGY

Aurangpura, Aurangabad, Maharashtra

body in white (b.i.w.) refers to the welded sheet metal components which form the vehicles structure to which the other components will be married, i.e., engine, chassis, exterior and interior trim.

product information :-

• its a work holding device used of easy , accurate, and fast assembly of job.
• basic types of welding fixtures in body shop:

1. geostationary fixtures ( i.e. geo fixtures).
2. re spot fixtures.
3. inspection fixtures
4. hemming fixtures

• other work holding devices:

1. gripper
2. deposits, racks, pallets.
3. conveyors, skids, trolley.

• other equipments:-gun stand, gripper stand, tip dresser, glue stand etc

Manual Welding Fixtures & Tack Welding Fixtures are tools designed to be used by a human welder to complete a welding process, whether it is completing a full weld or tack welds only. The fixtures may be automated with pneumatic clamping, or the fixtures may be able to use manual clamping for effective part holding. For large work pieces, hydraulic welding fixtures may be required to handle the load the part exerts on the tooling. Manual welding fixtures are designed to assist the human welder and produce more reliable results in a production welding process.

Product Information :-

• Its a work holding device used of easy , accurate, and fast assembly of job.

• Planet Metrology team can design a custom holding solution for your manual welding process that is both durable and cost efficient. From designing and building durable tack stations to intricate rotating manual welding jigs and fixtures, our team has the experience to get the job done right the first time

Best suitable for calibration of Vernier Calipers and Vernier Height Gauges of all types (Mechanical / Dial / Digital) up to 1 meter.

• Comprises of permanently wrung Gauge blocksin a protective casting.
• Gauge Blocks are made of selected Alloy Steel, Tungsten Carbide and Ceramic.
• The Caliper Checker also stands perpendicular to a surface for height gauge calibration.

The design of a good checking gauge that permits the easy, repeatable and reproducible verification of product over time is the best way to ensure we do not produce unnecessary non-conforming product and our customers continue to receive verified good product from suppliers.

Product Information :-

• Have readily accessible features which allow dimensional data to be obtained and to provide conformance to design and manufacturing requirements
• Provide consistent and accurate locating points to achieve maximum repeatability and reproducibility.
• Be accurately and economically constructed while exhibiting sufficient durability and stability for intended use.

They are ideal for inspecting Sheet Metal Component (pass/fail). Checking Fixture For Sheet Metal Components The offered range is extensively used for checking the quality of sheet metal part, automotive parts of any machine, automotive, aerospace etc. Its reduced time of part quality checking in mass manufacturing of single component or welded assembly.

Product Information :-

• Have readily accessible features which allow dimensional data to be obtained and to provide conformance to design and manufacturing requirements
• Provide consistent and accurate locating points to achieve maximum repeatability and reproducibility.
• Be accurately and economically constructed while exhibiting sufficient durability and stability for intended use.

Press working is used as general term to cover all press working operations on sheet metal. The stamping of parts from sheet metal is shaped or cur through deformation by shearing, punching, drawing, stretching, bending, coining etc. Production rates are high and secondary machining is not required to produce finished parts with in tolerance.

A pressed part may be produce by one or a combination of three fundamental press operations. They include:

• Cutting (blanking, piercing, lancing etc) to a predetermined configuration by exceeding the shear strength of the material.
• Forming (drawing or bending) whereby the desired part shape is achieved by overcoming the tensile resistance of the material.
• Coining (compression, squeezing, or forging) which accomplishes surface displacement by overcoming the compressive strength of the material.

Comparator Stands are basic building-blocks for the assembly of special-purpose, precision-measuring equipment. By mounting precision-measuring instruments onto the stands, all types of measurement including comparative measurement is possible.

Product Information :-

• The Comparator Stands consist of a very stable, castiron base and an upright column with a mounting bracket that features fine adjustment.
• Standard Stands are furnished with steel hardened & lapped base with diameter 8mm dial gauge mounting arm.

Air snaps are designed for those difficult to reach or between centers diameter measurements. Often, air snaps gage a part while it is engaged in the machine tool. Also Snap gages are ideal for production settings where specific diametrical or thickness measurements must be repeated frequently with precision and accuracy.

Product Information:-

• Range available from 10 mm to 150 mm with carbide resting pads.
• Provided with Master Setting Plug (higher & lower).
• Also offered to suit different makes, as per requirement.

Gauge Block Comparators are specifically designed for the measurement of Gauge Blocks by comparison, with no compromises made.

• Provides quick and reliable calibration of Gauge Blocks.
• Eminent for calibration of all grades of Gauge Blocks by comparison method.
• Specially developed user friendly software provides quick results for center deviation, parallelism and selection of grade.
• Two LVDT probes connecting both the faces of Gauge Blocks allow differential measurement that gives most accurate results.

They are ideal for inspecting holes or slots (pass/fail). They are also used as Masters for setting Micrometers, Vernier Calipers etc.

Product Information:-

• We offer a choice of choosing between GO and NO-GO both made in Tungsten Carbide/Steel and GO in Tungsten Carbide with NO-GO in Steel. The latter type is more popular owing to the cost advantage.
• We also manufacture Plain Plug Gauges to relevant I.S., B.S. and DIN standards based on customer requests from 1- 400mm diameter.
• We are also specialize in non-standard designs such as extra lengths, multiple diameters, air grooves, pilots, depth steps and relieved NO-GO ends.

Ring Gauges are ideal for measuring outside diameter of work pieces. A ring gauge is also effective to check out of roundness on the higher side. A master setting ring is used as a standard to set bore gauges, which can then be used to determine deviation from the master size.

Product Information :-

• We offer a choice of choosing between GO and NO-GO both made in Tungsten Carbide/Steel and GO in Tungsten Carbide with NO-GO in Steel. The latter type is more popular owing to the cost advantage.
• We also manufacture Ring Gauges to relevant I.S., B.S. and DIN standards based on customer requests from 1- 300mm diameter.
• We are also specialize in non-standard designs such as extra lengths, multiple diameters, air grooves, pilots, depth steps and relieved NO-GO ends.

Our Snap Gauges are designed for quick inspection of outside diameter of work pieces.

Product Information :-

• We offer Snap gauges in Steel and Carbide. We also make guages in Steel with measuring faces in Carbide.
• We also manufacture Snap Gauges to relevant I.S., B.S. and DIN standards based on customer requests from 1- 400mm diameter.
• Single ended and double ended types of snap gauges are available with proper marking of GO, NOGO & gauge identification.
• They are also designed as per customer specification for checking of length, thickness & groove diameters etc.

planet metrology make width gauges are best suitable for checking groove width.

product information :-

• we manufacture width gauges in reversible type design from 0.5 to 100mm.
• we provide go & nogo in carbide / steel.
• custom width gauges with special design for woodruff & crank pin width checking are also catered.

The Precision Measuring Pins offered by us are widely used for checking of bores, center distances, groove dimensions, inspection of micrometers, gear measurements etc.

Product Information :-

• Planet Metrology manufactures measuring pins from 0.3 20mm range in steps 0.005 / 0.010 / 0.020 / 0.050 & 0.1 mm steps.
• Loose pins are also supplied apart from sets.

we offer air plug gauges for quick and easy checking of bore size through bore, blind bore, stepped bore, taper & ovality.

product information :-

• air plug gauges are provided with pair of master setting ring (higher & lower).
• adjustable depth collar can be provided for checking specific height.
• offered with 2, 3 & 4 measuring jets as per requirement.
• also offered to suit different makes, as per requirement.

OurAir Ring Gauges are supplied in several styles for external measuring. Two and three jet rings are most common, used for checking outside diameters for sizes out of round conditions.

Product Information :-

• Air Ring Gauges are provided with pair of Master Setting Plug (higher & lower).
• Offered with 2, 3 & 4 measuring jets as per requirement.
• Also offered to suit different makes, as per requirement.

Angle Gauges are used for inspection and calibration of angles, tapers, indexing plates, rotary scale/table, dividing head, clinometers etc

Product Information :-

• Offered in Standard and Non Standard angles.
• Special angles as per requirement are also provided.
• Available in set as well as individual angles.

Ideal for calibration and zero setting of Internal Micrometers.

Product Information:-

• Comprises of permanently wrung Gauge blocksin a protective casting.
• Gauge Blocks are made of selected Alloy Steel, Tungsten Carbide and Ceramic.

The years of experience & our consistent innovative approach has helped us develop world class Gauge blocks. Planet Metrology has developed special production techniques to enhance the required characteristics of the materials.

Manufactured from special grade of Alloy steel, for greater wear resistance and for superior surface finish.

To expand the variety of rectangular gauge block applications, we offer the Gauge Block Accessories Set. By assembling the items in the set, your gauge blocks are easily and quickly changed into a precision measuring system.

Manufactured from same special alloy steel used for Gauge blocks so as to achieve the finest properties. Bars are offered in 22mm and 12mm diameter in steps of 25mm. Bars of 12mm dia. can be used as Micrometer Setting Standards.

IS 7014 / BS 5317standardsinmetric BS 1790 in imperial

Product information :-

• Single /Tri Colour Six Digit Display
• Absolute/Comparative Measurement
• Auto Calibration Facility
• Range/LC: 2000 m/1 m, 200 m/0.5 m, 200 m/0.10 m
• Metric/Imperial measurement
• RS 232 Output
• Single/ Tri Colour LED indicating component tolerance status

Best suitable for quick and reliable calibration of External Micrometer.

Product Information:-

• Consist of Gauge Blocks fixed in precisely manufactured vertical stand.
• Gauge blocks are made of selected Alloy Steel, Tungsten Carbide & Ceramic.

Planet Metrology manufactures these highly precise Dial Snap Gauges for quick comparative measurement of external diameter. They are proficient for inspection of continuous and batch production items.

Product Information :-

• Measuring faces are made of Tungsten Carbide for greater wear resistance.
• Any standard dial indicator with 8mm holding shank can be fitted easily.

Product Information :-

• Single /Tri Colour Six Digit Display
• Absolute/Comparative Measurement
• Auto Calibration Facility
• Selectable range and least count
• Metric/Imperial measurement
• RS 232 Output
• Single/ Tri Colour LED indicating component tolerance status

This Depth Micro checker is designed for efficient calibration and zero setting of Depth Micrometers

Product Information:-

• Comprises of permanently wrung Gauge Blocksin a protective casting.
• Gauge blocks are made of selected Alloy Steel and Tungsten Carbide.
• Gauge blocks are built-in the rigid frame to provide measuring in 25mm step in accordance with the travel range of micrometer head.
• An anvil of 25mm is supplied to provide a reference point for calibration at desired step within the measuring range of the Checker.