Kumar Sales Corporation

Borivali West, Mumbai, Maharashtra

We bring forth the best quality Fume Chamber that is used in all kinds of laboratories. The Laboratory Fume Chamber is used for protecting operators from eventually appearing to noxious matters like acids and gases. Our chamber is better than the conventional one in terms of performance. Additionally, we are one of the top Gas Fume Chamber Manufacturers and Suppliers in India. PJEX Fume Chambers are designed to protect operators from eventually appearing to noxious matters and is single most IMPORTANT Unit in all laboratories. Its unique design is result of long development, utilizing, sound engineering & aerodynamic principles at all sash openings. It performs better than conventional types and gives greater protection to the operators. Variety of MOC to suit to client's applications i.e. Metallic / Wooden / Plastic materials.

Construction / Design

• * Double skin sandwich construction. A sash made of toughened / laminated safety glass of 5mm thick dully framed which is concealed counter balanced operated by Steel String / Cable. Baffle at inside rear designed suitably provided as per applications.

• Metallic Outer Prime GI / CRCA Epoxy Powder Coated. Wooden Genuine Marine Plywood & seasoned teakwood framing with exterior laminated.

• PVC / PP Table top, Small Size & suitable for hazardous materials / organic , solvents etc.

Lining : Inside Lining of PPGL / PPFRP / S.STEEL (316 / 316L / 304) ORAC Cement sheet dully epoxy coated as acid / alkali / solvent resistance. Work Space : Table work space provided with Acid / Alkali resitance Tiles / Jet Black Grantile / Laminate / S. Steel / PP FRP / PP GL surface. Services : Ceramic / SS / PVC Sink, Water Line with Swan neck tap, gas / vacuum line etc. Under Bench : In model offered with Under bench is having provision for storage and LPG Cylinder storing with middle shelf and shutter provided. Facia : Electrical points of 5 / 15 Amp. Socket, Sandwich for illumination. Remote Control Knobs for Water / LPG / Vacuum lines as optional. Exhaust : Exhaust system comprising of centrifugal blower made of PPGL with FRP lining with dynamically balanced impeller of polypropylene (Directly / Pulley driven) driven by either Single Phase / Three Phase Standard make electric motors. Exhaust blower is of suitable capacity as per Fume Chamber size etc. Duct & Fittings : Generally 3MM thick plain or 6 mm thick PPGL Lined ducting of suitable size for inlet & outlet provided with various fitting accessories like Bend, Reducers, Flanges, Canopy, Motor guard etc. (*Optional) : Due to continuous R & D and specifications may change. Pictures shown with Optional accessories.

We offer superior quality Conical Flask that is high on demand in all kinds of scientific and medical laboratories. Conical Laboratory Flask is used for mixing and storing different chemicals for reactions. These flasks are properly marked for measuring the units of contents. Besides, we are one of the major Conical Glass Flask Exporters and Suppliers in India.

We reckon ourselves to be one of the chief Manufacturers, Suppliers and Exporters of Low Temperature Water Bath in India. Laboratory Cryostat Water Bath manufactured by us has several features that make it superior to others. It has a double walled body, inner thick guage SS, outer GI Powder finish /SS. The Constant Low Temperature Water Bath we produce has digital controls with micro controller to regulate temperature within + 0.10C >. It has an inbuilt electrical stirrer and glass window which allows keeping a check on the reactions. It enables the reactions to occur at low temperatures up to -25^oC.

Constant Temperature Water Bath produced by us is highly durable as it has distinct features. The features include thick walled body, digital controls, electric stirrer, booster heater, circulatory pump that helps maintain temperature inside the Constant Temperature Hot Water Bath. Also it has tough glass window, which helps in keeping a check on the chemical reactions. We are thought to be one of the foremost Constant Temperature Bath Manufacturers, Exporters and Suppliers in India, which provides its customers with optimum quality constant water bath.

Humidity Chambers are widely used in labs and industries to carry out testing of chemicals and also to carry our various chemical reactions. They are double walled with outer S. steel body and leak proof doors. The whole chamber is lighted with bulb. The humidity chambers manufactured by us contain various features that enhance their performance. They are fitted with ISI marked compressor, fan blade, air cooled condensing unit; glass window for viewing, digital controls, and etc. Humidity is created in the chamber with the help of steam and heating with the help of S. steel tubular heater with fins. We are counted among the top Humidity Control Chamber Manufacturers in India. We have acquired a firm stand in the world market as the Temperature Humidity Chambers Suppliers and Exporters due to our constant delivery of upgraded humidity chambers. Equipment developed as a result of intensive R & D and confirming to International Standards, suitable for most of environmental conditions, calibration, validation & Humidity Control Oven for above ambient conditions. ConstructionDouble walled, inner S.S.304 / 316* grade & outer S. Steel or GI dully Epoxy Powder coat / finish, gap filled with Glass wool insulation (PUF in situ foam*) Inner full length viewing glass / plexi door or viewing window on outer metallic door provided. (To select while ordering) Leak proof positive locking arrangment for door. Chamber illuminated with bulb. Cooling -CFC free* RefrigerationBy Hermetically sealed brand new ISI marked compressor coupled with air cooled condensing unit fitted with Motor, fan blade, Electrical Accessories etc. Mounted on bottom of unit on heavy base frame. HumidityHumidity Created with Steam & Injection into working chamber. HeatingBy long lasting S. Steel Tubular Heater with fins. Temperature ControlElectronic Digital Temperature Controller-Cum Indicator with Dry Bulb & Wet Bulb Principle. (Direct %RH setting optional) HTC_S.

(Bigger Size / Walk-in-Humidity Chamber on request.)

We present high end Orbital Shaking Incubator in the marketplace. Digital Orbital Shaking Incubator is used for controlled incubation and storage with orbital shaking motion. It is accessible with as well as without refrigeration system for below ambient and above ambient temperature conditions. Besides, we are one of the eminent Benchtop Orbital Shaking Incubator Suppliers in India.

• Scientifically designed to meet requirement of controlled incubation / storage with orbital shaking motion.

• Available with / without refrigeration system for below ambient / above ambient temperature conditions.

• Variety of platform to hold conical flasks i.e. 100, 150, 250, 500, 1000ml.

• Interchangeability of platform. (Optional).

• Variable speed 50 to 250 / 400 RPM with Digital Speed Meter.

Optional

• Electronic Timer.

• Illumination ( Tube / UV light ).

• Cyclic timer for illumination.

• Orbital Shaker Humidity Chamber also available.

We are reckoned as one of the major Laboratory BOD Incubator Exporters as well as Suppliers in India. BOD Incubator is used for Bio Chemical Oxygen Demand test. Our Low Temperature BOD Incubator is suitable for closed control of incubation and storage temperature. It is utilized for the storage of sensitive cultures, vaccines, sensitive cultures, seed germination etc. PJEX Equipment designed primarily to meet requirements of Bio Chemical Oxygen Demand test. Equipment are suitable for closed control of incubation / storage temperature. ApplicationsB.O.D. Tests, storage of sensitive cultures, vaccines, culture of bacteira, microorganism, serum incubation, seed germination etc. ConstructionInner S. Steel, outer CRCA / GI EPOXY Powder coat finish. CFC Free PUF in-situ form / glasswool insulation of about 3 Inch thick to prevent temperature loss. Full length inner plexi-glass door for viewing sample. Chamber with illumination. Castor wheel for easy movability. Cooling-CFC* free RefrigerationBy Hermetically sealed Brand New ISI Marked Compressor coupled with air cooled condensing unit fitted with Motor, Fan Blade, Electrical Accessories etc. Mounted on bottom of unit on heavy base frame. HeatingBy S. Steel Tubular heater with fins. Control PanelConsisting of self illuminated mains ON / OFF Switch, Indicating Lamps, Electronics Digital Temp. Controller-cum-indicator and fuse. Various types of Temperature Controls offered.

• Features (Optional for GMP / ICH model)

• ICH Guide Lines followed.

• S.S. removable trays.

• Safety thermostat to prevent over shoot. Individual HRC fuses for all controls.

• Bacterilogical Incubator are non refrigerated version for temperature range of ambient + 50C to 600C.

Technical Data

We are identified as one of the most stupendous Exporters of Glass Measuring Cylinder in the global market. Our Cylinder is uniquely designed to meet the requirements of Scientific Laboratories. We take huge concern in labeling our cylinder as we understand the importance of every particular unit. As a result, we are acknowledged as one of the renowned Measuring Cylinder Manufacturers, based in India.

A lab is set up with the help of various items like glassware, plasticware, chemicals, etc. We offer you a wide range of Scientific Laboratory Plasticware like beakers, funnels, plastic bottles, etc. Our Laboratory Plasticware is made from fine quality plastic so as to ensure that the solvents or chemicals stored or kept in them do not get spoilt. We manufacture them in different volumes and shapes so as to suit the needs of the lab user. We are one of the well-established Manufacturers, Exporters and suppliers of laboratory plasticware in India. The premium quality of our lab plasticware, our quick delivery and reasonable pricing has earned us worldwide respect.