piyush steel

Bhuleshwar, Mumbai, Maharashtra

With extensive support and assistance of skilled professionals, we Piyush Steel manufacture and trade Carbon Steel Bends at a diverse range. These Carbon Steel Bends are precision engineered to ensure high quality of carbon steel. These products have dimensional precision and fine finished threading to suit the industrial requirements the bend is used to change the direction of run of pipe. it advantage is can match long distance transition requirements, so it is commonly that bends dimension according to customer design. Usually, the bends consist of 3D, 5D, 7D even 12D series. Carbon steel bends. It is very common in large industries for bend. Our clients can avail from us these products at most reasonable prices.

Carbon Steel Long Radius Bend

We Piyush Steel pay attention to every detail and work to avoid unforeseen loopholes that can bring down the efficiency of our products at a later stage. Owing to their sturdy construction, dimensional accuracy and durability, this Long Radius Bend is in high demand. Piyush Steel has in-house facility for manufacturing bend in hot & Cold Forming, Pressing, Welding, Heat Treatment, Machining, Pickling, Ball Passing, Anti rust coating etc. Furthermore, this Carbon Steel Long Radius Bend are available in various specifications in various specifications as per the clients requirements.

Carbon Steel Piggable Bend

Piyush Steel provides a full line of quality Carbon Steel Piggable Bend pressure. Our Carbon Steel Piggable Bend is manufactured in accordance with this specification covers Carbon Steel Piggable Bend intended primarily for petroleum and gas pipelines in areas subject to low ambient temperatures. Eight grades, four yield-strength classes, and three different notch toughness levels are included. All material shall be heat treated by annealing, normalizing, precipitation hardening, quenching-and-tempering, normalizing-and-tempering, normalizing-and-precipitation hardening, or quenching-and-precipitation hardening. A chemical heat analysis shall be made and conform to the requirements.

Carbon Steel Hot Bend

We Piyush Steel is a leading company that is engaged in offering Carbon Steel Hot Bend. We Manufacturers fabricate Carbon Steel Hot Bend from premium quality steel. Finding applications in assortment of industries, steel sanitary Bend are appreciated for its strength and corrosion resistance. External coating can then be applied if required. It is involved in the applications for aircraft, missiles, anti-friction bearing, ordnance, etc. High grade steel and metal carbon is used to fabricate these Bend.

Carbon Steel 3D Bend

We Piyush Steel offer Carbon Steel 3D Bend in the form of return bends which are manufactured using superior quality raw material. Complying with prevalent industrial standards, these bends are known for high performance and durability. The standards and technical information regarding range and forms are tabulated as follows: 2D bend, 3D bend, 4D bend, 5D bend, 6D bend, 10D bend. the worlds most demanding industries - Oil and Gas Exploration and Production, Oil Refining and Processing, Petrochemical, Chemical, Plumbing, Our range is available at industry leading prices.

Carbon Steel 5D Bend We are manufacturing a wide range of precision engineered Carbon Steel 5D Bend. Our range of wall bends are manufactured in conformity with the market requirements and in compliance with the industries set standard. Carbon steel comes in a wide variety of grades each with its special characteristics and mechanical properties. Carbon Steel Bends are the 2 most common used materials in bend. Stainless steel differs from carbon steel by the amount of chromium present. Carbon steel rusts when exposed to air and moisture. We are offering a wide range of carbon steel bend.

Carbon Steel 10D Bend

Fabricated to perfection Piyush Steel range of carbon steel Bend for carbon steel pipe fitting is available in standard sizes and can be customized as per the specifications of the clients .We Manufactured using excellent quality material, these are highly durable and are economically priced. We pack these products using high quality tamper proof material. Our bend bends have a wide range of applications in petroleum, power generation, natural gas, chemicals, ship building, construction, paper making and other industries Processes.

Carbon Steel U Bend

Piyush Steel brings forth an exclusive range of Carbon Steel U Bend, which are known for their superior quality and excellent functionality. Fabricated from best grade raw material, our range is rigorously quality checked by our team of talented professionals on every stage of production to deliver the clients defect free best quality products. Each Carbon Steel U Bend of our range is rigorously quality checked by our team of talented professionals on every stage of production to deliver the clients defect free best quality products. This Carbon Steel U Bend can be custom designed in various diameters as per the requirements of our clients. Carbon Steel J Bend

Piyush steel offers a wide range of Carbon Steel J Bend, which are used in varied industrial applications. Manufactured from carbon steel, we also provide our product as per the customers specifications. Backed by our efficient workforce, we are able to manufacture a variety of Carbon Steel J Bend. We design and fabricate these bends in compliance with the international quality norms and standards, making use of high-grade raw material and latest techniques. Our quality controllers thoroughly check these bends prior to dispatch to ensure their complete flawlessness.

Carbon Steel Mitered Bend

We have in-depth expertise in manufacturing and offering Carbon Steel Mitered Bend as per clients demands. These are precisely designed to meet the exact application demands. We offer customization options to the clients and assure them with durable and corrosion resistant products. They are accordingly welded at certain angle which is easy to be installed and are available in varied dimensions. Our range of this Carbon Steel Mitered Bend is available in varied sized and are durable.

Carbon Steel Customized Bend

We Piyush Steel hard to bring the rich range of Low Temperature Carbon Steel and low temperature carbon steel pipes that are made of best quality raw material. As per your present & prospective requirements you can purchase any quantity of Low Temperature Carbon Steel from us. The Low Temperature Carbon Steel, that we provide, is available in different specifications to meet varying industrial applications. Our Low Temperature Carbon Steel is available at affordable prices. These Low Temperature Carbon Steel Pipes are used in petroleum and gas pipe line sectors.

LTCS Pipe

Our years of rich industry experience is Piyush Steel successfully produce quality LTCS Pipe. These are precision designed so as to cater to the needs of diverse industries. We offer LTCS Pipe which is made of high grade material, which further conforms to IS 1239:1979 standards. These pipes are widely accepted for their sturdy construction and durability. The products are also customized as per the specification set by the client.

LTCS Tubes

We Piyush Steel offer a wide range of LTCS Tubes that are extensively used in diverse industry. The entire range of products is made of premium quality raw material. These LTCS Tubes are highly acknowledged for their dimensional accuracy and sturdy construction. Our product are mainly used in the auto, agricultural machine, railway project, high pressure boiler tubes, bearing tubes, shipping manufacturing industry and other high standard processing industries.

LTCS Buttweld Fittings

We offer a comprehensive range of LTCS Buttweld Fittings, which find applications in different industries including oil & gas, engineering, petrochemical, offshore construction etc .Long lasting and highly tensile. This position is earned due to our ongoing mission to offer consistency in quality for both our products and services. LTCS Buttweld Fittings offers a complete line of standard as well as customized metal products to our clients.

LTCS Bend

Our range of LTCS Bend is manufactured using quality raw material which ensures optimum efficiency and durability. This LTCS Bend is available in various specifications that can be customized to suit the varied requirements of our clients. We Piyush Steel offer this LTCS Bend in a myriad of dimensions and specifications in order to meet the variegated demands of the customers. Our LTCS Bend is made of high grade components in state of art facility. We provide this highly durable heavy LTCS Bend at a very reasonable price range that best suit the pocket of our domestic & global clients.

LTCS Forged Fittings

We are offering our client an excellent quality range of LTCS Forged Fittings. These are manufactured from qualitative range of raw materials. These LTCS Forged Fittings are offered in variety of designs, shapes and sizes. We are an ISO Certified company that follows total Quality Management System. With the focus on exports, we have been maintaining a balance between quality of our products and price acclaimed for innovation and market handling techniques.

LTCS Olets

Our organization Piyush Steel is engaged in offering a quality range of LTCS Olets. We procure our range from prominent vendors, who ensure to manufacture these in compliance with international quality standards. Clients can avail from us LTCS Olets, which are acknowledged for their high performance and precision. In order to ensure the quality of the steel products, we get these checked on various quality parameters such as finish and strength at manufacturers' premises.

LTCS Flanges

We are a leading Supplier & Exporter of LTCS Flanges, Piyush Steel such as LTCS Flanges, from India. Our wide range of LTCS Flanges is available in various shapes and sizes to suit the variegated demands of diverse industries. These flanges can effectively work on both low and high temperature, whenever required. These are mostly used in the large scale industries. Our product is of more support to all industries for it is offered at a best price.

Piyush Steel is a Manufacturing and presenting a comprehensive range of SS 304 seamless pipes which are extensively used for conveyance of fluids intended for critical high temperature and general. Chemicals, Fats & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal. Piyush Steel has a team of talented professionals who checks and tests on various required parameters to ensure that they are with compliance to the industry standard. In addition, they are available at reasonable prices.

Piyush Steel is well recognized and experienced manufacturer and supplier of exclusive collection of SS 410 Round Bar. We believe in quality and we strive to provide exceptionally good quality bars and other stainless steel products to our domestic and international clients. Widely used in varied industries, this SS 410 Round Bar is known for their high strength, corrosion resistance, superior polishing and durability. Our range is available in various grades, thickness and dimensions to meet with various industrial usages.

Backed by an exclusive team of Piyush Steel we are able to render our clients a spectrum of Stainless Steel Plates-Sheets-Coils. Composed of supreme quality raw material which is in accordance to set industrial quality norms, the offered product incorporates features like longer durability, shinning effect, smooth finish etc. We Piyush Steel make sure that our products are up to the mark and our clients have no complaints. Being a customer centric company, we also offer these Stainless Steel Plates-Sheets-Coils in standard specifications as well as according to specific demands of our clients.

Piyush Steel amongst the renowned manufacturers of Alloy Steel Bends that have gained wide appreciation for international quality standards ensure these are durable and capable of reducing noise and vibration at the same time. These Alloy Steel Bends find their usage in varied industries and are available at competitive prices.Products: Alloy Steel Bends

Alloy Steel Long Radius Bend

A wide range of Alloy Steel Long Radius Bend is offered by Piyush Steel. This Long Radius Bend is used in applications that involve high pressure, impulse, vibration and temperature. Precision in tolerance and configurations is ensured by us. This Alloy Steel Long Radius Bend are used in petrochemical, power, nuclear, electronic and other major industries.

Alloy Steel Piggable Bend

Our Alloy Steel Piggable Bend is suitable for any application where very high standards are required to ensure superlative quality. Piyush Steel are used on- and offshore in the petrochemical, pharmaceutical, oil and gas, paper, food, nuclear power, sub-sea, cryogenic, and bio technology industries, and are fully welded with either manual or automated welding processes. Most sizes can be accommodated but please dont hesitate to contact us and make an enquiry if you would like to know more.

Alloy Steel Hot Bend

Piyush Steel is used in specialist applications in several industries and includes a range of options such as socket welds, butt welds and compression fittings. Manufactured using a range of premium-quality materials, we can make all pipelines to suit your individual requirements and specifications for the handling of liquids and gases, and many other operations.

Alloy Steel 3D Bend

We Piyush Steel are engaged in manufacturing and supplying a broad range of Alloy Steel 3D Bend to our valued clients. These bend are applauded in the market for their heavy brass end, long lasting, leakage-proof and cost effective features. Manufactured using excellent quality material, these are highly durable and are economically priced. We pack these products using high quality tamper proof material.

Alloy Steel 5D Bend

Clients can purchase with us a comprehensive range of Alloy Steel 5D Bend from Piyush Steel. The bend are available in varied options to choose from depending on our valued customers specific needs. Our company offers you industry level bends at very cost effective rates. Stringent quality check ensures that the bends available with us is always up to mark. Our Pipe Anchors have always found takers across industry.

Alloy Steel 10D Bend

Piyush Steel manufactures a wide range of Alloy Steel 10D Bend which is used in pipe fittings. These are manufactured from quality alloy steel. Our bend offers maximum tolerance and durability in the long run. These products are quality tested and manufactured under stringent quality norms. These products are precision engineered and available in different shapes and sizes.

Alloy Steel U Bend

Piyush Steel Suppliers & Exporters offer good quality Alloy Steel U Bend which is known for superior performance. These products are manufactured by using premium raw material and are subjected to strict quality checks to ensure that they meet the international standards. This Alloy Steel U Bend is available in a variety of shapes, sizes and dimensions. All our clients are satisfied with the functioning of our products. Some of the basic features of the product are as follows:

High durabilityEnhanced tensile strengthDimensional accuracyEconomically viable

Alloy Steel J Bend

Owing to our wide distribution network, we Piyush Steel are able to deliver all our Alloy Steel J Bend at clients' end within the stipulated time-frame. These products are designed and developed using high-grade raw material and latest technology to ensure that final output meets with international quality norms & standards. In addition to this, we provide customization to all the customers as per their demands and needs.

Features:

Corrosion & abrasion resistanceWear & tear resistanceDimensional accuracy

Alloy Steel Mitered Bend

Backed by our years of experience, we Piyush Steel are able to design and develop a wide range of Alloy Steel Mitered Bend. All the products are available in different sizes, shapes and designs at market leading prices to fulfill the demands and needs of customers. We also have the capability to customize all the products as per the demands and needs of customers.

Features: Robust constructionZero maintenanceLonger service life

Alloy Steel Customized Bend

Under the expert guidance of our experts we offer Alloy Steel Customized Bend to our valued customers. These alloy steel customized bend are stringent quality tests are conducted on the products to ensure their accordance with the international quality standards. Further, these alloy steel Customized Bend is widely appreciated by our global clients because of their sturdy construction and their precise dimensions. Known for their durability & high tensile strength, this Alloy Steel Customized Bend is offered in various sizes and dimensions as per the specifications given by our clients.

We are acknowledged for offering a flawless range of Alloy Steel Plates. Fabricated by making of use of stainless steel, carbon steel, alloy steel and other required basic material, these offered plates conform to the illustrated parameters of the industry. Furthermore, we have made the plates available in different sizes and thickness so as to meet multifarious demands of the clients. Our clients can avail from us a commendable gamut of Alloy Steel Plates. These offered sheets are developed by making use of supreme quality required basic material coupled with advanced machinery in line with the defined parameters of the industry. Furthermore, these sheets are available with us in different sizes and thickness suited to the multifarious demands of the clients.

ASTM A387 Gr.5 Plates

ASTM A387 Gr.5 Plates high quality chromium-molybdenum alloy steel plate, ideal for use in pressure vessels and industrial boilers due to its excellent heat resistant and anti corrosion properties. We Piyush Steel can supply plates from our own stockholding in Birmingham or directly from the mill and all plates come with mill test certification and individual stampings.

ASTM A387 Gr.9 Plates

ASTM A387 Gr.9 Plates is a flat-rolled product in coils or cut lengths between 1mm to 200mm thickness. ASTM A387 Gr.9 Plates is produced in nearly all types except the free machining and certain martens tic grades. ASTM A387 Gr.9 Plates from the conventional grades is almost exclusively produced on continuous mills. The steel is cast in ingots, and the ingots are rolled on a slabbing mill or a blooming mill into slabs or Plate. The slabs or Plate are then conditioned prior to being hot rolled on a finishing mill. Alternatively, the steel may be continuous cast directly into slabs that are ready for hot rolling on a finishing mill. The current trend worldwide is toward greater production from continuous cast slabs. ASTM A387 Gr.9 Plates produced from slabs on continuous rolling mills is coiled directly off the mill.

ASTM A387 Gr.11 Plates

Leading exporter and stockiest of stainless steel sheets fabricated to make sure our products comply with various international standards and customer specifications. Our range of products is available in different grades and size with great corrosion resistance strength and excellent durability. To discuss your requirement please call us or fill our feedback form and we will get back to you.Width 1000 mm to 1500 mmLength 1000 mm to 6000 mmThickness 1 mm to 100 mmFinishes 2B (CR) 2D (HR), BA, MAT, Mirror

ASTM A387 Gr.22 Plates

With over years of experience and expertise in ASTM A387 Gr.22 Plates we become one of the leader exporter and stockiest of different ASTM A387 Gr.22 Plates. We offer ASTM A387 Gr.22 Plates in different grades and size, also we Piyush Steel are happy to discuss any custom requirements. Kindly contact us to discuss your custom requirement.

ASTM A387 Gr.91 Plates

We Piyush Steel supplying a broad spectrum of steel sheets which is made of optimum quality ASTM of grade ASTM A387 Gr.91 Plates. With various dimensional specifications, these find ample usage in various fabrication and engineering projects. These plates and sheets are carefully designed and manufactured under rigid quality control procedures to ensure high precision and dimensional accuracy.

Specifications:Range: 0.5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75.

Duplex Steel Round Bar, also referred to as austenitic-ferritic stainless steels, are a family of grades with about equal proportions of ferrite and austenite. These Round Bars have a duplex microstructure which contributes to their high strength and high resistance to stress corrosion cracking. Due to their high content of chromium, nitrogen and molybdenum, duplex steel Round Bar offer good resistance to local and uniform corrosion. Duplex Steel Round Bar have good weldability.Today, modern duplex stainless steels can be divided into three groups:

Of the duplex grades, Duplex Steel Round Bar UNS S32750/S32760 is the most widely used. However, the super duplex steel Round Bar like Zeron 100 and 2507 are excellent for servicing severe corrosive environments, such as offshore and marine applications. Lean Duplex Plate 2101 is available as an economic alternative to 300 series stainless steels. What are the Characteristics of Duplex Steel Round bar?

• Very good resistance to uniform corrosion
• Very good resistance to pitting and crevice corrosion
• High resistance to stress corrosion cracking and corrosion fatigue
• High mechanical strength
• Good sulfide stress corrosion resistance
• Good abrasion and erosion resistance
• Good fatigue resistance high energy absorption
• Low thermal expansion
• Good weldability

In what Applications are Duplex Steel Round bar used? Oil and gas equipment

• Offshore technology
• Seawater desalination plants
• Chemical industry, especially when handling chlorides
• Flue-gas cleaning
• Desalination plants and seawater systems
• Pulp and paper industry
• Cargo tanks and pipe systems in chemical tankers
• Firewalls and blast walls on offshore platforms
• Bridges
• Storage tanks
• Pressure vessels, reactor tanks, and heat exchangers
• Rotors, impellers and shafts

Duplex Steel Bar: Range : 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Finish : Bright Black Polish Form : Round Square Hex (A/F) Bush Rectangle Flat Duplex Steel BarAstm a276 UNS S31803, S32205, S32750, S32760

Duplex Steel Forged Bar: Range : 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Finish : Bright BlackPolish Form : Round Square Hex (A/F) Bush Rectangle Flat Duplex Steel Forged BarAstm a276 UNS S31803, S32205, S32750, S32760

PIYUSH STEEL has an extensive inventory of 2205 Duplex steel plate in thicknesses from 3/16" through 3". The yield strength is about twice that of austenitic stainless steels, thus allowing a designer to save weight and making the alloy more cost competitive when compared to 316L or 317L.

Duplex Steel 2205 Plate (UNS S32205/S31803) is a 22% chromium, 3% molybdenum, 5-6% nickel, nitrogen alloyed duplex stainless steel with high general, localized, and stress corrosion resistance properties in addition to high strength and excellent impact toughness. Duplex Steel 2205 Plate (UNS S32205/S31803) provides pitting and crevice corrosion resistance superior to 316L or 317L austenitic stainless steels in almost all corrosive media. It also has high corrosion and erosion fatigue properties as well as lower thermal expansion and higher thermal conductivity than austenitic.

Duplex Steel Plate: Range : 5 mm To 100 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75. Types :Sheet, Plates, Coils, Flat, Strips, Profile, Blank , Circle, Ring etc.

MATERIALS :Duplex Steel Plate UNS S31803, S32205, S32750, S32760

Duplex Steel Sheet: Range : 1 mm To 3 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75. Types : Sheet, Plates, Coils, Flat, Strips, Profile, Blank , Circle, Ring etc.

MATERIALS : Duplex Steel Sheet UNS S31803, S32205, S32750, S32760

Inconel Seamless Pipes in superior quality metals are offered by us. Inconel pipes are highly resistant to heat and corrosion. Hardened by cold work, our range of Inconel pipes has additional strength. These seamless Inconel pipes can be used in the heat-treating of muffles, furnace components and in heat-treating baskets and trays.

We offer a wide range of Inconel Welded Pipes that find application in areas where there high reliability, strength and corrosion resistance is required. Our range of pipes is welded with over alloyed filler metals. Nitrogen is added to the shielding gas leading to high pitting and corrosion resistance in the weld. Apart from all standard dimensions, we also custom manufacture these Inconel Welded pipes as per client's requirements.

We offer Inconel pipes with following specifications and range RANGE : 15 NB UP TO 600 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS TYPE : SEAMLESS / ERW / WELDED/ FABRICATED FORM : ROUND, SQUARE, RECTANGULAR, HYDRAULIC ETC. LENGTH : SINGLE RANDOM, DOUBLE RANDOM & CUT LENGTH END : PLAIN END, BEVELLED END, TREADED VALUE ADDED SERVICES

• HOT DIPPED GALVANIZING
• EPOXY & FBE COATING ELECTRO POLISH
• DRAW & EXPANSION

Grades : ASTM / ASME UNS 6600 INCONEL 600 ASTM / ASME UNS 6601 INCONEL 601 ASTM / ASME UNS 6625 INCONEL 625 ASTM / ASME UNS 7718 INCONEL 718 ASTM / ASME UNS 7751 INCONEL X-750 ASTM / ASME UNS 8800 INCONEL 800 ASTM / ASME UNS 8810/11 INCOLOY 800H ASTM / ASME UNS 8825 INCOLOY 825

Inconel Buttweld fittings have excellent mechanical properties, low gas content and low vapor pressure along with high thermo-electrical conductivity. Further, these Inconel butt weld fittings are high corrosion resistant. Our array includes:

Inconel Elbow 45 Deg Seamless & welded Inconel 45 Deg Elbows are manufactured by us in long & short radius. These elbows are ideal for joining two pipes or tubes at 45. Different specifications of materials, grades, sizes, threading and pressure ratings can be availed from us at competitive prices.

Inconel TeeVarious threading specifications of Inconel Tee fittings are offered by us. Precisely engineered to close tolerance and appropriating dimensions, Inconel tees are widely used in industrial tubing to merge or divide fluids. Moreover, our range of Inconel Tee fittings do not require special tubing preparation before application.

Inconel CapsWe manufacture Inconel Caps to close tolerance and in excellent finishes. Precisely engineered these crosses are easy to install and remove. Inconel Caps provide leak free and torque free sealing in industrial tubing connections. We offer these Inconel Caps in different technical specifications of material, grades, sizes and threading. Inconel Concentric / Eccentric ReducerA wide range of Inconel Concentric/ Eccentric reducers are offered by us. These Inconel reducers are used in applications that involve high pressure, impulse, vibration and temperature. Precision in tolerance and configurations is ensured by us. These Inconel reducers are used in petrochemical, power, nuclear, electronic and other major industries.

We are renowned manufacturers and exporters of high grade Inconel Forged Fittings. They are sourced from certified vendors and are manufactured with the latest technologies. The talented team of our company ensures the quality and timely delivery of the products. Our range includes Inconel Cross, Inconel Forged Elbow, Inconel Forged Tee, Inconel Union, Inconel Swage Nipples, Inconel Coupling, Inconel Cap, Inconel Plug, Inconel Bushing and Inconel Boss.

Inconel Cross

The expert team of our company offers Inconel Cross. Our skilled professionals meet the bulk of orders in a stipulated time frame. They are widely used in various industries and id highly appreciated for its quality. These products are manufactured with the advanced technologies and include range starting from 1/2 NB to 4 NB also comprises of grade and class. In addition, we offer them at market leading prices.

Size : 1/2 NB to 4 NB

Type : Socket Weld & Screwed

Grade: UNS N06600, N06601, N06625, N08800, N08810, N08825

Inconel Forged Elbow Our expertise allows us offer Inconel Forged Elbow to our clients. They are widely used by nuclear, oil, chemical and gas industries. These products are offered in different sizes as per the specifications. The range is procured from reliable and well known vendors and is offered at market leading prices.

Size : 1/2 NB to 4 NB

Type : Socket Weld & Screwed

Grade: UNS N06600, N06601, N06625, N08800, N08810, N08825

Inconel Forged Tee Being an industry leader, we offer Inconel Forged Tee. These products are tested on various parameters ensuring its accordance with the international quality standards. They manufactured with the latest machines using high quality materials. We procure them certified vendors and offer them at market leading prices. In addition to this, they are available in size of 1/2 NB to 4 NB.

Size : 1/2 NB to 4 NB

Type : Socket Weld & Screwed

Grade: UNS N06600, N06601, N06625, N08800, N08810, N08825 Inconel Union We hold an expertise in offering Inconel Union to our valued customers. These products are widely renowned for its quality, strength, sturdy construction and durability. They are available in a size of 1/2 NB to 4 NB and type of screwed and socket weld. Our range is broadly used in various industries and is offered at market leading prices.

Size : 1/2 NB to 4 NB

Type : Socket Weld & Screwed

Grade: UNS N06600, N06601, N06625, N08800, N08810, N08825 Inconel Swage Nipples The expert team of our company offers Inconel Swage Nipples. They are manufactured with the latest machines using high quality materials. We procure them from certified and reliable vendors. These products are available in two types screwed and socket weld. Stringent quality tests are maintained at all levels before we deliver them to the clients.

Size : 1/2 NB to 4 NB

Type : Socket Weld & Screwed

Grade: UNS N06600, N06601, N06625, N08800, N08810, N08825 Inconel Coupling Our expertise allows us to offer Inconel Coupling. These products are widely brought into application in petrochemical, refrigeration, nuclear and refinery industry. They are acclaimed and appreciated across the globe for its quality, outstanding performance, durability, easy installation and smooth functionality. We offer them in different specifications and at market leading prices.

Size : 1/2 NB to 4 NB

Type : Socket Weld & Screwed

Grade: UNS N06600, N06601, N06625, N08800, N08810, N08825

Bushing, Plugs, Boss, Adapter, Socket, Olets, Weldolet, Nipolet, Latrolet, Sweepolet Inconel Cap We are renowned manufacturers and exporters of Inconel Cap. They are broadly used by various industries for its quality and durability. Stringent quality tests are conducted on the products ensuring their accordance with the international quality standards. Our skilled professionals meet the bulk of orders in a stipulated time frame.

Size : 1/2 NB to 4 NB

Type : Socket Weld & Screwed

Grade: UNS N06600, N06601, N06625, N08800, N08810, N08825

Bushing, Plugs, Boss, Adapter, Socket, Olets, Weldolet, Nipolet, Latrolet, Sweepolet

Inconel Plug Our clients can avail premium quality Inconel Plug from us. They are designed precisely under the expert guidance of our professionals. These products are widely renowned as they give outstanding results and are offered at industry leading prices. Our diligent team works in close coordination to meet the bulk of requirements in a stipulated time frame.

Size : 1/2 NB to 4 NB

Type : Socket Weld & Screwed

Grade: UNS N06600, N06601, N06625, N08800, N08810, N08825

Bushing, Plugs, Boss, Adapter, Socket, Olets, Weldolet, Nipolet, Latrolet, Sweepolet Inconel Bushing We are renowned manufacturer and exporter of premium quality Inconel Bushing. They are broadly renowned for its fine finishing, corrosion resistant and stability. Understanding the needs and requirements of our clients we offer customization services to our clients. they are available in a size of 1/2 NB to 4 NB and grade UNS N06600, N06601, N06625, N08800, N08810, N08825.

Size : 1/2 NB to 4 NB

Type : Socket Weld & Screwed

Grade: UNS N06600, N06601, N06625, N08800, N08810, N08825

Bushing, Plugs, Boss, Adapter, Socket, Olets, Weldolet, Nipolet, Latrolet, Sweepolet

Inconel Boss Being a quality centric organization, we present Inconel Boss to our customers. These products are manufactured with latest technologies using high grade raw material. Our range is highly appreciated for its quality and durability across the world. We offer them in a wide spectrum of grade, range and class. Apart from this, we offer them at industry leading prices.

Size : 1/2 NB to 4 NB

Type : Socket Weld & Screwed

Grade: UNS N06600, N06601, N06625, N08800, N08810, N08825

Bushing, Plugs, Boss, Adapter, Socket, Olets, Weldolet, Nipolet, Latrolet, Sweepolet

We are the finest supplier of high quality Inconel Sheets, Plates and Coils.Inconel Sheets, Plates and Coils are available in special alloys like Inconel 600, Inconel 601, Inconel 625, Inconel 718, Inconel X-750, Incoloy 800, Incoloy 800H and Incoloy 825. These products have been manufactured with different grades of top quality steel alloys. To ensure that these products are compliance to the industry norms, our experts stringently checks on various required standard. They are highly recommended and commonly used in various industrial and commercial complexes for superior quality, durability, resistant to corrosion and high functionality. In addition, we also offer product customization to meet various requirements of our valued clients.

RANGE : 6.35 mm OD upto 254 mm OD in 0.6 TO 20 mm thickness. TYPE : SEAMLESS / ERW / WELDED/ CDW FORM : ROUND, SQUARE, RECTANGULAR, COIL, 'U' SHAP, PAN CAKE OTHER : HYDRAULIC TUBE HORN TUBE CAPILLARY TUBE BOILER TUBE PRECISION TUBE IBR TUBE LENGTH SINGLE RANDOM, DOUBLE RANDOM & REQUIRED LENGTH END : PLAIN END, BEVELLED END, TREADED VALUE ADDED SERVICES

• HOT DIPPED GALVANIZING
• EPOXY & FBE COATING
• ELECTRO POLISH
• DRAW & EXPANSION BENDING BUFFING

GRADES : UNS 8825 INCONEL (825) UNS 6600 (INCONEL 600) UNS 6601 (INCONEL 601) UNS 6625 (INCONEL 625) Our sheets, plates and coils are made of nickel alloy plates & sheets, stainless steel & duplex steel plates, carbon steel & alloy steel plates and sheets. They are used in a range of applications like structural and mechanical & general engineering purposes. They are designed to withstand tremendous amount of weights and pressure.Our plates, sheets and coils are testimonials of our quality standards. Our range consists of sheets, plates & coils chequered plates, steel chequered Plates and more. RANGE : 0.5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75. GRADES

• UNS 8800 (INCONEL 800)
• UNS 8825 (INCONEL 825)
• UNS 6600 (INCONEL 600)
• UNS 6601 (INCONEL 601)
• UNS 6625 (INCONEL 625)

We are one of the leading suppliers of premium quality Inconnel Bars and Rounds.They are available in various profiles like Inconel 600, Inconel 601, Inconel 625, Inconel 718, Inconel X-750, Incoloy 800, Incoloy 800H, and Incoloy 825. These products are highly acknowledged for superior quality, smooth uniform surface, durability, high resistant to corrosion and high performance. Available in various sizes and lengths, they are commonly used in various industrial and domestic applications. We also offer these products at competitive prices.

We use innovative technology and techniques to manufacture highest grades of inconel round bars. Known for its quality, durability and high tolerance. Standard :ASTM / ASME SB 425, ASTM / ASME SB 166 , ASTM / ASME SB 446 Grades:UNS 8800 (INCONEL 800)UNS 8825 (INCONEL 825)UNS 6600 (INCONEL 600 )UNS 6601 ( INCONEL 601 )UNS 6625 (INCONEL 625)

We offer a wide range of monel plates & monel sheets that finds application in various industries across the globe. Manufactured from quality raw material, these monel plates & monel sheets are known for its unique features such as tight tolerance, smooth surface and uniformmechanical properties. Standard ASTM / ASME SB 127 Grades: * Monel 400 (UNS No. N04400)* Monel 500 (UNS No. N05500)

Hatelloy Buttweld fittings have excellent mechanical properties, low gas content and low vapor pressure along with high thermo-electrical conductivity. Further, these Hatelloy butt weld fittings are high corrosion resistant. Our array includes:

Hastelloy Elbow 45 Deg Seamless & welded Hatelloy 45 Deg Elbows are manufactured by us in long & short radius. These elbows are ideal for joining two pipes or tubes at 45. Different specifications of materials, grades, sizes, threading and pressure ratings can be availed from us at competitive prices.

Hastelloy TeeVarious threading specifications of Hatelloy Tee fittings are offered by us. Precisely engineered to close tolerance and appropriating dimensions, Hatelloy tees are widely used in industrial tubing to merge or divide fluids. Moreover, our range of Hatelloy Tee fittings do not require special tubing preparation before application.

Hastelloy CapsWe manufacture Hatelloy Caps to close tolerance and in excellent finishes. Precisely engineered these crosses are easy to install and remove. Hatelloy Caps provide leak free and torque free sealing in industrial tubing connections. We offer these Hatelloy Caps in different technical specifications of material, grades, sizes and threading. Hastelloy Concentric / Eccentric ReducerA wide range of Hatelloy Concentric/ Eccentric reducers are offered by us. These Hatelloy reducers are used in applications that involve high pressure, impulse, vibration and temperature. Precision in tolerance and configurations is ensured by us. These Hatelloy reducers are used in petrochemical, power, nuclear, electronic and other major industries.

Hastelloy fittings can be used for assembly of various automobiles, heavy-duty machines, pipes, ducts, etc. These fittings are ideal for application in marine and harsh industrial environment. Our range of hastelloy fittings can be customized as per specifications and drawings provided by the clients.

Specifications

Grades: Hastelloy C-4 (UNS No. N06455), C-276 (UNS No. N10276), Hastelloy C 22 (UNS No. N06022), Hastelloy C 2000

Standard : B366

Our comprehensive range of nickel fittings include elbow, bends, tees, reducer, caps, stub ends, etc. These fittings used in diverse industries for assembly of machines, automobiles parts, pipe connection, etc. We offer nickel fittings in both custom made and standard nickel fitting based on the requirements of the clients. Specifications Grades: Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Nickel 205 (UNS N02205)

Our range of nickel sheets & plates are known for providing good mechanical properties over a wide range of temperature and excellent resistance to many corrosives, in particular hydroxides. These sheets find major application in defense, nuclear reactors, chemical industry, seawater treatment, petrochemical, etc. Specifications Grades : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Nickel 205 (UNS N02205)

Copper Nickel Seamless Fittings:

We are the Specialized Manufacturers & exporters of all kind of Copper Nickel Seamless Pipe Fittings. Available in numerous specifications, these Fittings are manufacturing with high grade steel & tested by a quality expertise team. Further, these can also be customized as per the requirements of our clients.

Grade : C70600(90:10), C71500 (70:30), C71640 Products : Seamless pipe, Seamless Tube, Seamless Buttweld Fittings, Seamless Bend, Seamless Forged Fittings, Seamless Outlets, Seamless Flanges etc.

Copper Nickel Welded Fittings:

We are the Specialized Manufacturers & exporters of all kind of Copper NIckel Welded Fittings. Available in numerous specifications, these Fittings are manufacturing with high grade steel & tested by a quality expertise team. Further, these can also be customized as per the requirements of our clients. Form : Welded pipe, Welded Tube, Welded Buttweld Fittings, Weldded Forged Fittings, Welded Outlets, Welded Flanges

MATERIALS : Copper Nickel Welded Fittings C70400, C70600(90:10), C71000, C71500 (70:30), C71640

Copper Nickel Hydraulic Fittings:

Size : 1/2 To 2" IN OD & NB Type : Screwed (SCRD) BSP, BSPT Form : Blukhead Union, Reducing Union, Union, Union Elbow, Hex Nipple, Elbow, Cap, Adapter, Tee etc. Grade : C70600(90:10), C71500 (70:30), C71640

Copper Nickel C70600 Pipefittings: Copper Nickel C70600 Forged FittingsCopper Nickel C70600 Outlet FittingsCopper Nickel C70600 Flanges Copper Nickel C70600 Flanges Copper Nickel C70600 Flanges Forged Fittings : NB to 4 NB in 3000 LBS, 6000 LBSOutlets : to 24 in 3000 LBS, 6000 LBS FORM: Elbow 45 deg & 90 degree, Tee , Union, Full & Half coupling, Cross, Cap, Swage Nipple, Plug, BushOutlets : Weldolet, Sockolet, Elbowlet, Thredolet, Nipolet, Letrolet, SwepoletOTHER FORM: Hydraulic Fittings, Instrumentation FittingsStandard: ASTM / ASME SB 61 / 62 / 151 / 152.Grade: C70600(90:10), C71500 (70:30), C71640

Copper Nickel C71500 Pipefittings:

Copper Nickel 70600 Buttweld Fittings RANGE : 1/2" NB TO 36"NB IN SCH: 5 to XXS. TYPE : SEAMLESS / WELDED/ FABRICATED FORM : Elbows in Long & Short Radius in 45 deg, 90 deg, 180 deg. Equal, Unequal Tee, Eccentric Reducer & Concentric Reducer, Caps & Crosses, Long & Short Stub End, Swage Nipple & Barrel Nipple. Bend: 3d, 5D, 6D, 8D, 10D & 20D, Long Radius Bend, Piggable Bend, Hot Bend

Copper Nickel C71500 Forged Fittings RANGE: Forged Fittings : NB to 4 NB in 3000 LBS, 6000 LBS Outlets : to 24 in 3000 LBS, 6000 LBS TYPE : Socket Weld (S/W) & Screwed (SCRD)FORM: Elbow 45 deg & 90 degree, Tee , Union, Full & Half coupling, Cross, Cap, Swage Nipple, Plug, Bush Outlets : Weldolet, Sockolet, Elbowlet, Thredolet, Nipolet, Letrolet, Swepolet OTHER FORM: Hydraulic Fittings, Instrumentation Fittings Standard: ASTM / ASME SB 61 / 62 / 151 / 152. Grade: C70600(90:10), C71500 (70:30), C71640

Copper Nickel C71640 Pipefittings:

Copper Nickel 70600 Buttweld Fittings RANGE : 1/2" NB TO 36"NB IN SCH: 5 to XXS. TYPE : SEAMLESS / WELDED/ FABRICATED FORM : Elbows in Long & Short Radius in 45 deg, 90 deg, 180 deg. Equal, Unequal Tee, Eccentric Reducer & Concentric Reducer, Caps & Crosses, Long & Short Stub End, Swage Nipple & Barrel Nipple. Bend: 3d, 5D, 6D, 8D, 10D & 20D, Long Radius Bend, Piggable Bend, Hot Bend Copper Nickel C71640 Forged Fittings RANGE: Forged Fittings : NB to 4 NB in 3000 LBS, 6000 LBS Outlets : to 24 in 3000 LBS, 6000 LBS TYPE : Socket Weld (S/W) & Screwed (SCRD) FORM: Elbow 45 deg & 90 degree, Tee , Union, Full & Half coupling, Cross, Cap, Swage Nipple, Plug, Bush Outlets : Weldolet, Sockolet, Elbowlet, Thredolet, Nipolet, Letrolet, Swepolet OTHER FORM: Hydraulic Fittings, Instrumentation Fittings Standard: ASTM / ASME SB 61 / 62 / 151 / 152. Grade: C70600(90:10), C71500 (70:30), C71640

Copper Nickel Long Radius Bend: Size : 1/2"NB TO 6 " IN OD & NB IN Various SWG & SCH Form : Long Radius Bend, Piggable Bend, Hot Bend, 3D, 5D, U, J, Customized, Mitered Bend. MATERIALS :Copper Nickel Long Radius Bend Cu-Ni LR Bend C70600(90:10), C71500 (70:30), C71640

Copper Nickel 3D Bend:

Size : 1/2"NB TO 6 " IN OD & NB IN Various SWG & SCH Form : Long Radius Bend, Piggable Bend, Hot Bend, 3D, 5D, U, J, Customized, Mitered Bend. MATERIALS : Copper Nickel 3D Bend Cu-Ni 3D Bend C70600(90:10), C71500 (70:30), C71640

Copper Nickel 5D Bend:

Size : 1/2"NB TO 6 " IN OD & NB IN Various SWG & SCH Form : Long Radius Bend, Piggable Bend, Hot Bend.

MATERIALS : Copper Nickel 5D Bend Cu-Ni 5D Bend C70600(90:10), C71500 (70:30), C71640

Copper Nickel U Bend:

Size :1/2"NB TO 6 " IN OD & NB IN Various SWG & SCH Form : Long Radius Bend, Piggable Bend, Hot Bend, 3D, 5D, U, J, Customized, Mitered Bend.

MATERIALS : Copper Nickel U Bend Cu-Ni U Bend C70600(90:10), C71500 (70:30), C71640

Copper Nickel J Bend:

Size : 1/2"NB TO 6 " IN OD & NB IN Various SWG & SCH Form : Long Radius Bend, Piggable Bend, Hot Bend, 3D, 5D, U, J, Customized, Mitered Bend.

MATERIALS : Copper Nickel J Bend Cu-Ni J Bend C70600(90:10), C71500 (70:30), C71640

Copper NIckel Round Bar:

Range : 5 mm To 500 mm Dia in 100 mm TO 6000 mm Length. Finish : Bright BlackPolish Form : Round Square Hex (A/F) Bush Rectangle Flat Copper Nickel Round Bar Cu-Ni Round Bar 70600(90:10), C71500 (70:30), C71640

Copper NIckel Forged Bar:

Range : 5 mm To 500 mm Dia in 100 mm TO 6000 mm Length. Finish : Bright BlackPolish Form : Round Square Hex (A/F) Bush Rectangle Flat Copper Nickel Forged Bar 70600(90:10), C71500 (70:30), C71640