Pioneer Roofing Works

Mullickbazar, Kolkata, West Bengal

Metal Floor Decking Sheets are used as the stable floors of the building structures. These decking sheets are very helpful to change the look of the interiors of homes, balconies or other building structures easily and quickly. The floor decking sheets are temporary platforms that can be changed conveniently as per the requirements. For creating new levels within the building, these decking sheets are required for a strong construction.

Features :

• These are light in weight that helps to reduce pressure on other levels on the floor
• Easy to assemble and thus can be laid or replaced easily
• Huge loading capacity enables to allow too much load
• Anti-earthquake, so cannot be easily affected by serious earthquakes
• High Intensity
• Durable
• Have good dimensional stability
• Fireproof
• Waterproof and erosion proof due to which these sheets are not affected by earth materials.
• Requires low maintenance
• Resistant to cracking, warping or splitting
• Stable to temperature
• Not affected by moisture

Available Thickness:

• 0.80mm, 1mm, 1.20mm, 1.50mm & 2.00mm

Galvanized Decking Sheetsare available in numerous sizes, designs, and colors and are in extensively demanded in homes, restaurants, hotels and many other places. Further our quality auditors test this sheet on set parameters to ensure a flawless product from our end and retain customers permanently. Our products are of rugged design, excellent strength, durable and easy to install.

Available Thickness of Sheet:

• 0.8mm, 1mm, 1.2mm, 1.6mm

Our esteemed customers can avail from us qualitativeFloor Decking Sheetat a prudent cost. Created with high-review fundamental material and propelled innovation, these items adjust to the made quality parameters of the business. Consequently, meeting desires of the customers. Moreover, to manage the characterized parameters of the business, we offer these sheets in distinctive sizes and shades.

Features:

• Smooth finish
• Water proof
• UV protected

These Glavanized Decking sheets are the profile sheets with the color coating over the metal surface of these sheets. These profile sheets are manufactured by cold-rolling technique and are hot-dipped galvanized by zinc. Thickness of the colors coated on the surface of these sheets depends on the specific requirements.

Composite Floor Deckwith strong and reliable shear bond performance which is augmented by cross embossing located in the profile. The composite floor profile offers the ultimate in the light weight steel decking which reduced concrete usage to provide a cost effective and alternative floor solution that easy to install.

Product Description

Features:

• Lightweight and doesnt require any support, which considerably reduces the use of concrete slab thickness.
• Acts as the composite member and as permanent shuttering.
• No major reinforcement required.
• The deck can be used as working platform during construction.
• The Speedy construction enables faster completion of a project.
• The metal deck can also be used as roofing and cladding sheet in cement, power plants and bulk material handling plants.
• Decking reduces the construction time, hence the total cost.

Notes (Common to all Deck Profiles):

• The properties given are for the one-meter width of the Profile.
• Limiting deflection is taken as spam / 150.
• Allowable loads may be multiplied by a factor of 0.80 for sheets spanning over 2 or 3 supports.
• Shear Connectors / Ribs are optional.

Roof Decking Sheets support the roof elements by providing exceptional strength and strong structural platform. In addition to this, an effective spanning of the roofs can be greatly achieved by using these sheets for roof decking. With these decking sheets a strong solid base can be provided in any situation without using purlins or framing underneath the roofing. By using perfect combination of Roofing Sheets and Roof Decking Sheets, the durability and strength of whole roof is considerably enhanced.
Material of Construction:
Roof Decking Sheets are excellent materials to cover the roof and are capable to withstand various types of loads, therefore superior quality of raw materials are only used to design these sheets. Materials like steel, aluminum or the alloys are important base materials for a robust construction. For offering excellent insulation the metal sheets are sandwiched between insulating polymers like polyurethane and polystyrene.
Design Considerations:
These are following design considerations that we put to manufacture these sheets:

• Adhesion, fixing or ballasting are notable design factors for long lasting capability
• Materials chosen are fire proof
• Well designed to bear extra loads
• Condensation risk is also the designing factor
• Designed to provide better insulation
• Able to fulfill the acoustic requirements
• Whole design is compact and light in weight
• Designed meticulously in conjugation with the aesthetic importance

Features:

• Non-Fragile
• Greater loading capacity
• Excellent design
• Uncluttered appearance
• Weather proof
• Greater span capability
• Dimensional stability of these sheets are excellent
• Have recyclable content

Product DescriptionSteel Deck Sheetare galvanized and are used as a permanent formwork or composite floor system. This sheet binds with concrete slab and together forms a portion of the floor structure. The linking between concrete and the floor deck happens by a system that is built into the deck, creating a reinforced concrete slab. The fast and simple installation makes these sheets widely demanded in the market. The sheets ensure strong and reliable shear bond performance, which is improved by cross embossing located in the profile.

Features:

• It provides stable working platform
• Easy and fast installation
• Reduces weight of concrete floor, so it is economical
• Lightweight & cut to length gives easy fixing of studs, clips, and screws

Available Finish:

• Galvanized
• Cold Rolled (CR)
• Both side primer coated (Galvanized)
• Pre-coated galvanized underside giving the durable and attractive appearance and minimum future maintenance.

Advantages of Steel Deck Profile Sheets:

• Lightweight and lessens the weight of the concrete floor about 50%
• Does not require additional support and Economical, decreasing use of concrete as well as slab thickness and saving in reinforcement steel
• Easy and swift installation - time saving and no key reinforcement is required
• Multi-faceted- flooring, temporary or permanent shuttering, roofing or cladding, working platform during construction
• Offers international polished look, no need for internal plastering of roofs.

We present an exclusive range of Composite Decking Sheet to our clients, which are designed under the guidance of our experts. Our range is provided in different designs and colors that can be customized as per the requirement of our clients. Moreover, our range finds huge demand in the competitive market for the unique features such as high finishing and performance.

Features:

• Durability
• Smooth finish
• Water proof

Steel Deck Sheetare galvanized and are used as a permanent formwork or composite floor system. This sheet binds with concrete slab and together forms a portion of the floor structure. The linking between concrete and the floor deck happens by a system that is built into the deck, creating a reinforced concrete slab. The fast and simple installation makes these sheets widely demanded in the market. The sheets ensure strong and reliable shear bond performance, which is improved by cross embossing located in the profile.

Features:

• It provides stable working platform
• Easy and fast installation
• Reduces weight of concrete floor, so it is economical
• Lightweight & cut to length gives easy fixing of studs, clips, and screws

Available Finish:

• Galvanized
• Cold Rolled (CR)
• Both side primer coated (Galvanized)
• Pre-coated galvanized underside giving the durable and attractive appearance and minimum future maintenance.

Advantages of Steel Deck Profile Sheets:

• Lightweight and lessens the weight of the concrete floor about 50%
• Does not require additional support and Economical, decreasing use of concrete as well as slab thickness and saving in reinforcement steel
• Easy and swift installation - time saving and no key reinforcement is required
• Multi-faceted- flooring, temporary or permanent shuttering, roofing or cladding, working platform during construction
• Offers international polished look, no need for internal plastering of roofs.

Product DescriptionSteel Deck Sheetare galvanized and are used as a permanent formwork or composite floor system. This sheet binds with concrete slab and together forms a portion of the floor structure. The linking between concrete and the floor deck happens by a system that is built into the deck, creating a reinforced concrete slab. The fast and simple installation makes these sheets widely demanded in the market. The sheets ensure strong and reliable shear bond performance, which is improved by cross embossing located in the profile.

Features:

• It provides stable working platform
• Easy and fast installation
• Reduces weight of concrete floor, so it is economical
• Lightweight & cut to length gives easy fixing of studs, clips, and screws

Available Finish:

• Galvanized
• Cold Rolled (CR)
• Both side primer coated (Galvanized)
• Pre-coated galvanized underside giving the durable and attractive appearance and minimum future maintenance.

Advantages of Steel Deck Profile Sheets:

• Lightweight and lessens the weight of the concrete floor about 50%
• Does not require additional support and Economical, decreasing use of concrete as well as slab thickness and saving in reinforcement steel
• Easy and swift installation - time saving and no key reinforcement is required
• Multi-faceted- flooring, temporary or permanent shuttering, roofing or cladding, working platform during construction
• Offers international polished look, no need for internal plastering of roofs.

Stainless Steel Decking Sheetswith strong and reliable shear bond performance which is augmented by cross embossing located in the profile. The composite floor profile offers the ultimate in the light weight steel decking which reduced concrete usage to provide a cost effective and alternative floor solution that easy to install.

Available Thickness of Sheet:

• 0.8mm, 1mm, 1.2mm, 1.6mm

2mm Deck Slab Sheetwith strong and reliable shear bond performance which is augmented by cross embossing located in the profile. The composite floor profile offers the ultimate in the light weight steel decking which reduced concrete usage to provide a cost effective and alternative floor solution that easy to install.

Available Thickness of Sheet:

• 1mm/1.2mm/1.6mm/ 2.00mm

Steel deck is made by cold forming structural grade steel into a repeating pattern of parallel ribs. The strength and stiffness of the panels are a result of the shape of the ribs and the material properties of the steel. The present version of the Indian Standard for Cold Rolled Cold Annealed (CRCA) steel (IS 513) is not rich in content in respect to the structural applications that CRCA steel has been witnessing in the country. With hot rolled (HR) Steel long available in grades likeYst 240andYst 310for processing into CR steel, the exclusion of structural grade steel fromIS 513remains an enigma. Indian steel manufacturers also makeYst 550grade of HR and thus availability of high tensile structural steel is a reality for structural grade CRCA material. However, because of the low ductility of high tensile steel (elongations are generally about 1 to 4% for Yst 550 grade CR), its use for deck applications where they act as formwork to support green concrete and unforeseen erection loads until the slab attains its properties may not be wise. The sheets are furnished in standard width with ends square cut.

Features:

• Light weight and doesnt require any support, which considerably reduces the use of concrete & slab thickness.
• Acts as composite member and as permanent shuttering.
• No major reinforcement required.
• Deck can be used as working platform during construction.
• Speedy construction enables faster completion of a project.
• Metal deck can also be used as roofing and cladding sheet in cement, power plants and bulk material handling plants.
• Decking reduces the construction time, hence the total cost.
• Pioneer deck sheets are comply with all national and international standards such as CR Steel (as per IS: 513, D-Quality) / HR Steel (as per IS:1079) / Galvanized Steel (as per IS:277).

Trapezoidal Metal Profile sheets with strong and reliable shear bond performance which is augmented by cross embossing located in the profile. The composite floor profile offers the ultimate in the light weight steel decking which reduced concrete usage to provide a cost effective and alternative floor solution that easy to install.

The floor is constituted by a profiled sheet onto which a layer of concrete is poured. The sheet is bonded to the concrete by means of moldings on the sheet which stop the concrete from slipping horizontally and detaching vertically. When the concrete is poured and until it has reached and appropriate level of hardening (stage 1), the weights of the concrete, personnel working and equipment used in borne by the sheet alone. Once the concrete has hardened (stage 2) the sheet and the concrete form a unified bond with all the characteristics of traditional reinforced concrete, where the sheet, after having performed the function of framework, acts as a metal reinforcement. Appropriate crop ends must be provided to absorb the negative moments.

Applications:

• High Rise Buildings
• Multiplexes / Commercial Buildings
• Power Plant Buildings
• Office Buildings
• Mezzanine Floors in Industrial Buildings & Warehouses
• Steel deck for mezzanine floors
• Thickness: 0.8mm / 1mm / 1.2mm

Finished Type:

• Galvanized
• Cold Rolled (CR)

Advantages:

• Tensile steel for composite slab construction that cuts down on slab thickness and dead weight of buildings
• No separate frame work required for slab casting
• Reduces construction time