Our Products
Electrical & Electronic Testing Devices
2 Products availableLeading Manufacturer, Supplier & Retailer of Portable Co-meter, Portable Co-meter with Co Temperature Remote Probe, Differential Pressure Meter, Non Contact Temperature Meter and Differential Pressure Meter Including Calibration Protocol.
The flowmeter of the series EE771, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow of compressed air and gasses. Measurement of for instance the usage of compressed air, nitrogen, oxygen, CO2 or other non-corrosive gasses.
The EE35 series is designed for accurate measurement of dew point Td and frost point Tf in compressed air and in harsh industrial environments.Working range Td : -60.600 C (-761400 F)Working range T : 0.600 C (321400 F)Accuracy Td : -+0.20 C (-+0.360 F)Accuracy T : -+0.20 C (-+0.360 F)Output : 0- 5V / 0 10V or 0 20 mA /4 -20 mA configurable by softwareSupply voltage: 12.30V AC / 835V DC
ApplicationsIndustrial ProcessesMonitoring Of AirPressure PipelinesWarehousesDrying ProcessesPaper IndustriesChemical Industries
Monitoring flow of fluids or gases within the line in any process industry is a very tedious and a monotonous task. Triton provides you the solution to ease your job using its Clamp-on Ultrasonic flowmeters which easily gets clamped on the pipe and through minute adjustments you can get readings with 1% accuracy.
Clamp on ultrasonic flowmeters are easy to carry, use and have high repeatability of 0.5%. Just clamp it to the line whose flow is to be measured and get the readings on the meter display. These find wide application in validation, auditing and preventive maintenance.
Ultrasonic flowmeters works on the principle of Transit time and have high precision from line size 3/4 to 240. These are applicable to all kinds of fluids whether pure water, gasoline, hydrocarbons, HSD or any rare fluid. Triton provides you with wide range of portable flowmeters with sensors that are easy to carry and install and can work on different line sizes, you just have to change certain values. One can also check the signal quality and signal to noise ratio check are some of the unique features of the flowmeter.
Benefits&Features:High accuracy, 1% of velocity.NIST StandardNon-intrusive, clamp-on installation, easy and fast.No pipe disturbance, no pressure drop, no moving partsLight weight (1.2lbs/538g for the handset). Compact design.Bi-directional, wide range, [-52ft/s 52ft/s (-16m/s 16m/s)]Wide pipe size range, [3/4 240(DN20 DN6, 000 mm)]Suitable for all commonly used pipe materials and liquids.Rechargeable battery for 10 hours of operation.Built-in data logger.Totalizer for net, positive and negative flow.Self-explanatory user interface. Very easy to operate.Optional StufManager TM PC software for data download and real-time data display.Signal quality tracking and self-adjusting capabilities automatically match
DigitalMag 888 signal converter is used together with DigitalMag 888 flow sensor to form a complete magnetic flowmeter system for accurate liquid flow measurement. It utilizes state-of-the-art technologies in digital signal processing and electromagnetic sensor design. The converter is able to measure bidirectional flow and totalize the flow in both forward and reverse directions separately.
DigitalMag 888 magnetic flowmeter has been widely used to measure the volume of conductive liquids such as water, sewage, acid, alkali, salt water as well as mixture of liquids and solids.
SpecificationsAccuracy: 0.5% of the value displayed. 0.3% is selectableCaliber: DN10DN3000mm (3/8120)Nominal Pressure: 0.64.0MPaLiner material: Teflon, PFA, F46, Neoprene, Polyurethane.Electrode type: General type, scraper type or replaceable type.Electrode material: 0Cr18Ni12M02Ti, Hastelloy B, Hastelloy C, Titanium, Tantalum, Platinum-iridium, Stainless steel covered with tungsten.Medium temperatureIntegral type:-100c+800cRemote type: Neoprene & Polyurethane Liner -10c+80cPTFE, PFA, F46 Liner -100c+1600cAmbient Temperature: -250c+600cAmbient Humidity: 5100%RH (relative humidity)Medium Electrical conductivity: 15s/cm standard. 5s/cm upon request.Measuring Range: 1500:1, flow rate15m/sStructure Type: Integral type, remote type, submersible type, ex-proof type.Protection Class: IP65 standard. IP68 optional.IP65: dustproof and watertightIP68: dustproof and submersible for long term (only for remote type)Product Standard: JB/T9248-1999 Electromagnetic Flowmeter
We have a wide range of online ultra sonic flow meters. These flowmeters have 1 % of accuracy of fluid velocity. These flowmeters have three different version i.e. Clamp-on, insertion, flow cell. Clamp-on flowmeters can be easily clamped on the lines where intrusion is not possible.
Clamp on kind of sensors measure the flow of fluids in the different pipe material, i.e. MS, CS, SS, almost any plastic material etc. Since these sensors are non-intrusive hence they offer no undesirable pressure drop in the process flow. A major advantage with clamp-on is that same flowmeter can be used from 3/4 to 240 line size by just making some parameter changes in the parameters.
Insertion kind of flow meters gives user a benefit to put sensors inside the line and measure almost any kind of fluid flow. These flowmeters have better accuracy as compared to clamp-on kind of flowmeters. These flowmeters have better signal strength even in fluids with suspended particles or impurities.
Flow-cell flowmeters gives you an accuracy of 0.5% and has better stability as compared to other two flowmeters. These flange to flange type flowmeters are manufactured as per customers specifications. Flow-cell type of flowmeters comes in standard sizes i.e. from 3/8 to 20 line size. The output signals obtained from the meter are 4 to 20 mA, pulse output and has ModBus protocol for communication.
The available two models are STUF-300F & ST-301. For product specifications please download product catalogues.
Benefits & FeaturesWide measurement range , 16 m/sWide pipe size range, DN 25 6000 mmBi-directional flow measurement.Large turn down ratio.Temperature range -40C to 155C.Suitable for most pure liquids or liquids withBuilt-in flow totalizer, batchcontroller, batch controller and task scheduler.Optional thermal energy measurement moduleSelf adaptation technology and signal quality trackingVersatile outputs 4-20 mA, ModBus, Pulse output, Batch Control.Low Power consumption < 1 Wt at 9VDC
BTU meters are used on chiller lines to measure the energy consumed by the chillers in the cooling process. Our BTU meters are constantly used in projects and recommended by various consultants and BMS providers across the country. Shenitech ST-280T BTU meters are based on Ultrasonic Transit Time Technology. These BTU meters assure Class-2 accuracy and have a tamper-proof model as per the energy norms in various countries.
These BTU meters have an in-built battery i.e. no hassles of power supply on the site. Battery back-up lasts for 6 years. Since there is no moving part in the sensor assembly these meters are maintenance free and hence has high reliability.
We have an entire range of ultrasonic flowmeter from 15mm to Line sizes more than 700mm and customized for higher line sizes as per your requirements.
Our meters can detect a very high capacity of flow. Because of the high flow capacity, we need a lower size meter for a certain flow rate.For example: 100mm line size might require our 65mm flow meter. This enables cost saving and also proper sizing of the meter.
All our meters are wet calibrated where the temperature and flow sensor are calibrated together and we give a calibration certificate with each and every meter.
All our meters have an inbuilt battery backup guaranteed for a minimum of 6 years.Hence no hassels of giving rthe power supply and spending unnecessary cabling and cable laying cost.
No reflector used for detection of flow. This ensure that meters are very robust and dont have any problems even after years of operation. This ensures efficiency of meter and maintenance free years of operation.
Single point source for meters, hardware for interconnectivity (M-Bus) and software for billing and meter reading. This ensures zero dependence on a third party. Also we ensure that the system is up and running at all times.
mper proof designensures no tampering in the final bill
2 years international warranty on all the products
Attapur, Hyderabad, Telangana 