Phoenix India Solutions

Manpada, Thane, Maharashtra

Details:Double walled unitsOuter body made of MS duly powder coated (SS optional)Inner chamber made of SSMicro processor based PID temperature indicator cum control with LED displa.

Details :

• Double walled units
• Outer body made of MS duly powder coated (SS optional)
• Inner chamber made of SS
• Micro processor based PID temperature indicator cum control with LED display
• Tempered safety glass viewing window
• Two diaphragm valves for admission of inert gas / dry air
• High grade mineral glass wool insulation
• Vacuum range 10 to 720 mmHg or better

Model : Size (cm), Volume (Liters)

• 20 x 20 cm, 6.5 L
• 30 x 30 cm, 21 L
• 30 x 45 cm, 31 L
• 30 x 60 cm, 42 L
• 45 x 60 cm, 95 L

A furnace in which the subject material is isolated from the fuel and all of the products of combustion, including gases and flying ash.

Salient Features :

• Triple walled unit for better thermal safety
• Temperature range upto: 900/ 1000 / 1100 / 1200 / 1300 / 1450
• Ceramic fibre insulation
• PID temperature indicator cum controller
• K type / B type thermocouple
• Heating element : Kanthal A1 grade wire
• Size: 4 x 4 x 9 (A) inches, 6 x 6 x 12 (B) inches, 8 x 8 x 18 (C) inches

Specifications :

• Temperature Range: Upto 1200oC
• Working Temperature: 1150oC
• Temperature Resolution: 1C
• Control Accuracy:+1% OF FSD

Dimensions :

• 9″x4″x4″
• 10″x5″x5″
• 12″x6″x6″
• 18″x9″x9″

Optional :

• Electronic Digital Timer Range 0 to 999 minutes
• Single channel Data Logger with printing arrangement
• RS 485 for PC communication with Software Meta-Logger

Fume hood can reduce or eliminate exposure to volatile liquids, dusts, and mists

The fume hood is often the primary control device for protecting laboratory workers when working with flammable and/or toxic chemicals. Hoods protect workers by: Containing vapors, dusts, gases, and fumes generated within the hood, and removing them as air flows into the hood and then out via the laboratory exhaust system.

Features :

• Outer body of fume hood is made of mild steel duly powder coated
• Work table is made of 0.8 mm thick stainless steel 304 sheet or 16 mm thickness Granite slab.
• A sliding door of aluminum frame fitted with full view clear glass moves vertically up/down with
• counter balanced weight operated by steel rope
• Hose is provided with fluorescent light for easy working in the chamber and a storage cabinet is also provided for storing of material
• A 6/16 Amp socket and switch is also provided in hood for providing electric supply to small devices – hot plate, magnetic stirrer, etc used in hood
• The control panel is fitted with on/off switches for mains, motor-blower, tube light and socket Machine requires 230V, Single Phase, 50 Cycles, AC power supply

Optional :

• Fume Duct and exhaust line – PVC or HDPE as required
• Inner chamber made of SS 316 and outer made of SS 304
• Small SS sink or PP sink with water tap and water drain outlet fitted on work table
• Colour coded utility service remote control valve 2 nos for air (nitrogen, oxygen, etc) & water knobs are mounted on front side of hood outside the working chamber. Nozzle is fitted inside the chamber.
• Stream lined airfoil made at the bottom of hood work table opening for smooth flow and avoiding turbulence inside the hood.
• SS grid fitted inside the work chamber

Inner Cabinet Dimensions :

• 2’ x 2’ x 3’
• 3’ x 2’ x 3’
• 4’ x 2’ x 3’
• 5’ x 2’ x 3’
• 6’ x 2’ x 3’

These can accurately measure the refractive index between nD 1.3000 to 1.7000 with sugar percentage (Brix) of 0-95%.

UV Cabinet is used for viewing and detecting prepared substance in various laboratories and investigation works

Features :

• The cabinet accommodates two UV sources, each 12” long rating 8 watts.
• The cabinet has short UV (UV-C or 254nm), & long UV(UV-A or 365nm) sources.
• For ease of positioning the sample a visible light is provided.
• Efficient UV reflectors are precisely aligned with the sources to ensure that the maximum possible radiation from the sources reaches the sample.
• The UV sources are interlocked to prevent simultanueous short & long UV radiations.
• The front door extends the full width of cabinet to permit larger samples to be placed within the cabinet.
• The door of the cabinet is hinged. It opens out just by pulling out its knob.
• The cabinet is made from G.I sheet powder coated.
• The inside of the UV cabinet is powder coated with UV & Visible absorbing black finished to increase the contrast & prevent reflection of UV Rays. This is also a safety feature as it prevents glare & reflection of UV radiations into the user’s eyes.
• This UV cabinet is designed to even allow user with spectacles to be comfortable for continuous long use in sitting & standing position.

This mantle is designed with a cold rolling sheet and adjustable sensor rack with spraying exterior surface. The offered mantle is available with us in 250ml, 500ml, 2000ml, 5000ml, 20000ml and other capacities that are designed to handle temperature of 380oC to 450oC.

• Body of the Heating Mantle is made of spun joint less Aluminum
• Heating element knitted fiber glass netting properly insulted
• Long lasting element made by nichrome wire
• Controlled by energy regulator

Digital Heating Mantle :

• Body of the Heating Mantle is made of spun joint less Aluminum
• Heating element knitted fiber glass netting properly insulted
• Long lasting element made by nichrome wire
• Controlled by Microprocessor based Auto Tune PID Digital Temp. Controller

Standard Features: State-of-the-art design, suitable for white as well as coloured samples in powdered form. Instrument can detect melting range as well as melting point of vario.

Standard Features : State-of-the-art design, suitable for white as well as coloured samples in powdered form.

• Instrument can detect melting range as well as melting point of various types of samples.
• Magnified image of the sample can be viewed on a video monitor screen via CCD camera which helps observe physical changes.
• GLP compliant printout with sample name, ID No., date, time etc. for authentication.
• Calibration Mode – Built-in calibration facility for two-point auto calibration with USP standards.
• Password protection for calibration mode.
• Compliance with USP melting range procedure as per Class – I A & EP Method 2.2.60
• Graphical report of temperature v/s. light units with indications for start of melting & end of melting.
• Can also detect the melting range as well as melting point of decomposed samples, as well as waxy and polymer samples.
• Patented design.
• Onscreen Parameter/ Result display facility(Optional).

The automatic Titrator is useful for titration types such as Acid base titrations, Non-aqueous titrations, Redox titrations, Argentometric titrations, Precipitation titrations, Complexometric titrations, pH stat titrations, Enzymatic titrations, EDTA titrations, TAN/TBN titrations, diazotization titrations etc.

With these facilities it can work as acid base titrator, Redox titrator, Argentometric titrator, Precipitation titrator, Complexometric titrator, pH stat titrator, Enzymatic titrator, EDTA titrator, TAN/TBN titrator, diazotization titrator etc.

Applications Industry : Chemical, Pharma, Dairy, Biotechnology, Fertilizer, Petrochemicals, Waters, Dyes, Paints, Food & Beverage , oil , distilleries, cosmetics, steel etc.

Titration Type : Acid base titrations, Non-aqueous titrations, Redox titrations, Argentometric titrations, Precipitation titrations, Complexometric titrations, Enzymatic titrations, EDTA titrations, TAN/TBN titrations etc.

Standard Features :

• Imported burette assembly of various sizes (5/10/25 ml) with NIST traceability.
• Perform all types of titrations including Acid- Base, Non-aq, Redox, Complexometric, Precipitation as well as pH STAT Titrations.
• Storage Facility for 50 methods.
• GLP compliant printouts of results, data table, graphs etc. with alphanumeric entries of sample name, titrant name, identification no. & date for report authentication.
• Auto calculation of results in various selectable units.
• Can be used as a simple pH meter with display of pH, mV and temperature values.
• PC Compatibility – Software & built in balance interface.
• Two-tier password facility (admin and user) to protect stored methods from any misuse or unwanted change.
• Complies with USP/BP/JP/EP/IP/ASTM standards.
• Quick & easy interchangeability from titration mode to Karl Fischer titration mode.

Features :

• Alpha-Numeric splash proof keyboard allows entries like sample name, sample Number/ ID number for data authentication.
• Selectable report printout complies to GLP requirements.
• Built-in Real Time Clock (RTC) for date, time display & authenticity of printout.
• Error indication to trace out the problem.
• Meets specification of USP, BP, EP, IP etc.
• Programmable Temperature & Time.
• Moulded, Clear acrylic water bath with illumination for better visibility.
• Baskets are automatically lifted at the end of the test.
• Capability for dual buffer disintegration test.
• Audible, low water level alarm with indication on display for safety.
• Individual temperature sensors available for individual beakers.

Details :

• Data Displayed :Selected Speed, Selected Spindle, Viscosity readings (cP or mPa·s or cSt), Percentage of Full Scale Range (%), Sample Temperature (Optional, degree C or degree F)
• Viscosity Readings :Absolute viscosity (cP or mPa·s), Apparent viscosity (cP or mPa·s), Kinematic viscosity (cSt, mm²/sec) (Density introduced by the user)

• Accurate measurement of optical rotations, for study of polarisation effects and for quick and easy discrimination between right-handed sugars such as dextrose and left handed sugar such as laevulose.
• The instruments find use in industries as well as in colleges and universities
• Polarimeter (220 mm) GNI make Indian Tube having both angular sugar scale with Rotating Triple Shadow effect with fine optics, suitable for sugar industries without Lamp Assembly.
• Polarimeter (400 mm) GNI make Indian Tube having both angular sugar scale with rotating Half shadow, without Lamp Assembly.
• Polarimeter (400 mm) GNI make Indian with fine optics and Rotating triple Shadow without Lamp Assembly, Best for Sugar Industries.
• Polarimeter Tubes, Center / Side Filling, Optically True.

The Spire range of heating blocks are developed for providing best possible solution for heating round bottom flask, vials, test tubes, micro centrifuge tubes.
Heating time and cooling down time of heating blocks is much faster. Therefore safety conscious scientists are increasingly turning to Heat-On as the safe, cost efficient, high performance alternative and environmentally friendly working practices in laboratories.