Sterilization (or sterilisation) in simple terms, refers to any process that effectively kills or eliminates transmissible agents (such as bacteria, viruses, spore forms etc.) from a surface, equipment or biological culture medium.Sterilization can be achieved through application of heat, chemicals, irradiation, or filtration. Of these, heat (steam) sterilization is proven to be the most effective.A minimum temperature-time relationship must be maintained throughout all portions of load to accomplish effective sterilization. Exposure time depends upon size and contents of load, and temperature within the sterilizer. At the end of the cycle, re-evaporation of water condensate must effectively dry contents of the load to maintain sterility.

• Control system as per 21CFR part 11.
• Dimple jacket of SS 316L provided for enchanced / uniform and temperature distribution (within 1oC during the sterilization phase.
• Bioseal: A biological safety barrier separates the sterile and non-sterile zon.
• Integration of sterile section with isolator.
• Machine gasket groove for the door.
• Air detection system for porus load.
• Rack & Pinion arrangement for door movements.
• Seal water recirculation arrangement.
• Temperature control through PLC using floating sensor mechanism.
• Electric Steam Generator (Optional).
• Provided with Pure steam sampling arrangement with heat exchanger for easy draw of sample in aseptic and safe temperature condition(Optional

• Glass Bottles, Vials, Ampoules, Containers
• Stainless steel and aluminium containers
• Powders like sulphonamides and talcum powder

1. Load is arranged to ensure uninterrupted air flow.
2. DHS may be pre- heated for materials with poor heat conductivity.
3. The temperature is allowed to reduce up to 55C-60C prior to removal of sterilized material.

• Chamber is manufactured in SS316L. Fully welded with round corners.
• The doors are of hinged type, equipped with double edge seal gasket for maximum safety
• For operation, control and data acquisition a PLC is provided. HMI facilitates interface between operator and equipment.
• Equipments are available with single door as well as double door pass through arrangement.
• Bio seal flange to seal the equipment into the building wall can be provided
• HEPA filters are installed in the fresh air, recirculation and exhaust module. In addition, 0.5 micron Micro B filter is installed as a pre-filter to the Fresh Air HEPA
• Three modules for air handling
• Fresh air (air intake)
• Recirculation
• Exhaust

• Sterilization of filled containers of HDPE/LDPE, multi-layer pouches/bottles & glass bottles
• After sterilization the product packaging comes out totally dry unlike the bottles sterilized in super-heated water spray sterilizer.
• Large volume infusion/parenteral solution in plastic bottles & plastic bags
• Blood bags
• Pre-filled syringes or ampoules
• Blister pack products
• Contact lenses

• Recirculation blowers with double (optional) mechanical seal & a powerful electric motor to ensure uniform mixing of steam & air.
• Finned tube heat exchangers for effective and rapid cooling of the load
• Baffle plates for horizontal flow to optimize temperature distribution
• Automatic sliding doors for ease of operation
• Guide rails for easy movement of product carriages inside the chamber
• Optional automatic loading unloading system
• Single or double door, semi-automatic hinged type or automatic sliding type
• Temperature & pressure monitoring inside the chamber
• PLC & HMI based control system with provision for SCADA connectivity.
• Range of alarms & safety devices for product, process & operator safety
• Rapid cooling cycle available for shorter cycle time
• Provided with extensive documentation

• Designed in alignment with hospital requirements of load, space and utilities
• Compact and comprehensive design to reduce footprint-included with in-built boiler and Air Compressor
• Fully automatic operation through a highly sophisticated and responsive control system for accurate control and simple operation
• Ergonomic design facilitating effortless operations with easy tray & carriage design and one-touch operation
• Hygienic and long lasting construction with all contact parts of SS316L
• Efficient operation with the help of special design features such as dimpled jacket and non-condensable gas removal arrangement
• Safety first: the Safety measures are incorporated in our sterilizer such as to make it fool proof

Sterilization (or sterilisation) in simple terms, refers to any process that effectively kills or eliminates transmissible agents (such as bacteria, viruses, spore forms etc.) from a surface, equipment or biological culture medium.Sterilization can be achieved through application of heat, chemicals, irradiation, or filtration. Of these, heat (steam) sterilization is proven to be the most effective.A minimum temperature-time relationship must be maintained throughout all portions of load to accomplish effective sterilization. Exposure time depends upon size and contents of load, and temperature within the sterilizer. At the end of the cycle, re-evaporation of water condensate must effectively dry contents of the load to maintain sterility.

• Control system as per 21CFR part 11.
• Dimple jacket of SS 316L provided for enchanced / uniform and temperature distribution (within 1oC during the sterilization phase.
• Bioseal: A biological safety barrier separates the sterile and non-sterile zon.
• Integration of sterile section with isolator.
• Machine gasket groove for the door.
• Air detection system for porus load.
• Rack & Pinion arrangement for door movements.
• Seal water recirculation arrangement.
• Temperature control through PLC using floating sensor mechanism.
• Electric Steam Generator (Optional).
• Provided with Pure steam sampling arrangement with heat exchanger for easy draw of sample in aseptic and safe temperature condition(Optional

• Glass Bottles, Vials, Ampoules, Containers
• Stainless steel and aluminium containers
• Powders like sulphonamides and talcum powder

1. Load is arranged to ensure uninterrupted air flow.
2. DHS may be pre- heated for materials with poor heat conductivity.
3. The temperature is allowed to reduce up to 55C-60C prior to removal of sterilized material.

• Chamber is manufactured in SS316L. Fully welded with round corners.
• The doors are of hinged type, equipped with double edge seal gasket for maximum safety
• For operation, control and data acquisition a PLC is provided. HMI facilitates interface between operator and equipment.
• Equipments are available with single door as well as double door pass through arrangement.
• Bio seal flange to seal the equipment into the building wall can be provided
• HEPA filters are installed in the fresh air, recirculation and exhaust module. In addition, 0.5 micron Micro B filter is installed as a pre-filter to the Fresh Air HEPA
• Three modules for air handling
• Fresh air (air intake)
• Recirculation
• Exhaust

• Sterilization of filled containers of HDPE/LDPE, multi-layer pouches/bottles & glass bottles
• After sterilization the product packaging comes out totally dry unlike the bottles sterilized in super-heated water spray sterilizer.
• Large volume infusion/parenteral solution in plastic bottles & plastic bags
• Blood bags
• Pre-filled syringes or ampoules
• Blister pack products
• Contact lenses

• Recirculation blowers with double (optional) mechanical seal & a powerful electric motor to ensure uniform mixing of steam & air.
• Finned tube heat exchangers for effective and rapid cooling of the load
• Baffle plates for horizontal flow to optimize temperature distribution
• Automatic sliding doors for ease of operation
• Guide rails for easy movement of product carriages inside the chamber
• Optional automatic loading unloading system
• Single or double door, semi-automatic hinged type or automatic sliding type
• Temperature & pressure monitoring inside the chamber
• PLC & HMI based control system with provision for SCADA connectivity.
• Range of alarms & safety devices for product, process & operator safety
• Rapid cooling cycle available for shorter cycle time
• Provided with extensive documentation

• Designed in alignment with hospital requirements of load, space and utilities
• Compact and comprehensive design to reduce footprint-included with in-built boiler and Air Compressor
• Fully automatic operation through a highly sophisticated and responsive control system for accurate control and simple operation
• Ergonomic design facilitating effortless operations with easy tray & carriage design and one-touch operation
• Hygienic and long lasting construction with all contact parts of SS316L
• Efficient operation with the help of special design features such as dimpled jacket and non-condensable gas removal arrangement
• Safety first: the Safety measures are incorporated in our sterilizer such as to make it fool proof