Catalysts And Absorbents #1447888

Product Name: 2, 3, 5-Triiodobenzoic acid Synonyms: Triiodobenzoicacid, 98% CAS: 88-82-4 Molecular Formula:C7H3I3O2 Molecular Weight: 499.81 EINECS: 201-859-6 Density: 2.971 gcm3 Appearance: white to off-whitecrystals Purity : 98% M.P : 220-223 C Molecular Structure: Uses : Used as a plant growth regulator and controller. It suppresses somatic embryo formation and postembryonic shoot root development in Eleutherococcus senticosus. It is used for increasing male flower initiation and acts as bio fertilizers and chemicals.

indole-3-butyric acid

indole-3-butyric acid (1h-indole-3-butanoic acid,  iba) is a white to light-yellow crystalline solid, with the molecular formula c₁₂h₁₃no₂. It melts at 125 °c in atmospheric pressure and decomposes before boiling. Iba is a plant hormone in the auxin family and is an ingredient in many commercial horticultural plant rooting products.

 

since iba is not soluble in water, it is typically dissolved in 75% or purer alcohol for use in plant rooting, making a solution of between 10, 000 to 50, 000 ppm. This alcohol solution is then diluted with distilled water to the desired concentration. Iba is also available as a salt, which is soluble in water. The solution should be kept in a cool, dark place for best results.

this compound had been thought to be strictly synthetic; however, it was reported that the compound was isolated from leaves and seeds of maize and other species. In maize iba has been shown to be synthesized in vivo using iaa and other compounds as precursors.^[1] this chemical may also be extracted from any of the salix (willow) genus. 

We are offering nitric acid nitric acid, also known as aqua fortis and spirit of niter, is a highly corrosive strong mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. cas number7697-37-2 formula: hno3 density: 1.51 gcm molar mass: 63.01 gmol boiling point: 83 c iupac id: nitric acid melting point: -42 c

We are offering sulphuric acid. Cas no. 7664-93-9 chemical name: sulfuric acidsynonyms: bou;so4--;so4-2;so42-;o2s(oh)2;acid mist;dippingacid;sulfur acid;caswellno815;ng acidcbnumber: cb9675634molecular formula: h2so4formula weight: 98.08sulfuric acid propertymp : 10c bp : 290 c(lit.) density : 1.840 gml at 25 c(lit.) vapor density :

We are main supplier of this product.

Tetrabutylammonium bromide (TBAB) is a quaternary ammonium salt with a bromide commonly used as a phase transfer catalyst.[2] It is used to prepare many other tetrabutylammonium salts by salt metathesis reactions. The anhydrous form is a white solid.

Fumaric acid is a valuable compound used in foods, beverages, detergents, animal feed, pharmaceuticals and miscellaneous industrial products. It is produced on a large scale by the petrochemical route but the current tendency is towards implementing “green production” and environmental friendly technologies like biotechnological production of fumaric acid using low-cost raw materials. In this context, numerous studies focus on improving the fermentation process not only by using renewable raw material and genetically modified microorganisms, but also by developing and applying different downstream techniques for easy recovery of fumaric acid from the fermented broth. This review presents the main methods for production and separation of fumaric acid, highlighting the advantages and disadvantages of these and the potential economic impact in industry.

While our name features in the list of the most distinguished manufacturers and suppliers of Ethidium Bromide BP from Mumbai, Maharashtra, our state-of-the-art manufacturing unit, and experienced team of workers carefully manufactures the Ethidium Bromide BP using advanced technology and modern equipments. The Ethidium Bromide BP is an intercalating agent that is essentially used as a fluorescent tag in molecular biology laboratories for techniques such as agarose gel electrophoresis. Our modern and technologically advanced transport facilities ensure prompt and safe delivery of the products to our esteemed customers.

Appearance White to Orange to Green powder to crystal

Purity(HPLC) min. 98.0 area%

 

Purity(Neutralization titration) min. 98.0 % Melting point 184.0 to 189.0 °C

Malic acid is a chemical found in certain fruits and wines. It is sometimes used as medicine. Malic acid is used most commonly for dry mouth. It is also used for fibromyalgia, fatigue, and skin conditions, but there is no good scientific evidence to support these other uses.

 

Despite its sinister sounding name, the word malic acid comes from the Latin word malum, which means apple. Malic acid was first isolated from apple juice in 1785, and it’s what gives some foods and drinks a tart taste. If you’re a fan of slightly acidic wine, malic acid probably played a huge role. It’s also a common ingredient in many hair and skin care products that include:

shampoosbody lotionsnail treatmentsacne and anti-aging products

Malic acid is part of a family of fruit acids, called alpha hydroxy acids (AHAs). Alpha hydroxy acids stimulate exfoliation by interfering with how your skin cells bond. As a result, dull skin is removed to make way for newer skin. Skin care products that contain malic acid can provide benefits that include:

skin hydrationexfoliation, or the removal of dead skin cellsimproved skin smoothness and tonereduction in wrinkles

Your body also produces malic acid naturally when converting carbohydrates into energy. Movement would be very difficult without malic acid. It’ll probably be no surprise that malic acid also has other health benefits too.

Keep reading to discover why malic acid is one of the ingredients you’ll want to keep an eye out for when shopping for your skin care products.

Cleanses and rejuvenates the skin

Malic acid in skin care products is celebrated for its ability to brighten the skin and smooth its texture. That’s why it’s a common ingredient in anti-aging creams.

According to a brain-skin connection studyTrusted Source, higher stress can worsen skin conditions like eczema, acne, and premature aging. And while wine can help reduce stress, external use of malic acid might be a healthier application.

Skin pH balance and hydration

Malic acid is also a humectant. It helps with moisture retention to help your skin stay hydrated.

Thiomalic Acid (Mercaptosuccinic Acid) pure, 99%
CAS NO  70-49-5
Molecular Formula : C4H6O4S

Molecular Weight : 150.16

Part B

Storage : Room Temperature

HSN Code : 29171990

We are offering hydrofluoric acid.Product identificationcas no. 7664-39-3 einecs no. 231-634-8 formula hf mol wt. 20.01 h.s.code 2811.11 toxicity synonyms hydrogen fluoride; etching acid; ahf; fluorohydric acid;fluoric acid; hf acid; acide fluorhydrique (french); acido fluoridrico (italian); fluorowodor (polish); fluorwasserstoff (german); fluorwaterstof (dutch);raw materials classification physical and chemical properties (anhydrous)physical state clear, colorless, corrosive fuming liquidmelting point -84 cboiling point 19.5 cspecific gravity 0.97solubility in water miscibleph vapor density 2.21autoignition nfpa ratings health: 4 ; flammability: 0; reactivity: 1refractive index flash point not flammablestability stable under ordinary conditionsgeneral description & applicationshydrofluoric acid is the aqueous solution of hydrogen fluoride which is gas at room temperature (boiling point: 19 c). The pure hydrogen fluoride is a strong acid, it reacts violently with bases and is corrosive. It reacts violently with metals, glass, some forms of plastic, rubber, and coatings. Hf exists in complex of h6f6, due to hydrogen binding. The aqueous solution of hydrogen fluoride (hydrofluoric acid) is a weak acid as the high strength of hydrogen-fluorine bonds does not allow complete are dissociation with water. It is a highly corrosive, fuming, and hazardous substance that liquid and vapor can cause severe burns. Hf is prepared from the reaction of concentrated sulfuric acid on fluospar (a mineral composed of calcium fluoride, caf2).Hydrofluoric acid is used as the catalyst of refinery alkylation. the term alkylation in petroleum refinery field is for the reaction of low olefins (typically butene) anf isoparaffins (typically isobutane) to form higher isoparaffins. Hydrofluoric acid is capable of dissolving inorganic oxides including glass (sio2), which offers following applications:

We are main supplier of this product.

We are offering iodine. iodine - I chemical properties of iodine - health effects of iodine - environmental effects of iodineatomic number 53atomic mass 126.9045 g.mol -1electronegativity according to pauling 2.5density 4.93 g.cm-3 at 20cmelting point 114 cboiling point 184 cvanderwaals radius 0.177 nmionic radius 0.216 nm (-1) ; 0.05 nm (+7)isotopes 15electronic shell [ kr ] 4d10 5s25p5energy of first ionisation 1008.7 kj.mol -1standard potential + 0.58 v ( i2 i- ) iodineiodine is a non-metallic, dark-graypurple-black, lustrous, solid element. Iodine is the most electropositive halogen and the least reactive of the halogens even if it can still form compounds with many elements. Iodine sublime easily on heating to give a purple vapour. Iodine dissolves in some solvents, such as carbon tetrachloride and it is only slightly soluble in water. Applicationsiodine is used in medical treatment as tincture and iodioform, it is employed in the preparation of certain drugs and in the manufacture of some printing inks and dyes. Silver iodine is used in photography. Iodine is added to almost all the table salt and is used as a supplement to animal feed. It is also an ingredient of water purification tablets that are used for drinking water preparation. For many of these uses iodine is turned into iodides. Iodine in the environmentiodine is added to nearly any kind of salt that is applied. It is an ingredient of bread, sea fish and oceanic plants. Iodine is naturally present in the ocean and some sea fish and water plants will store it in their tissues. Iodine can be found naturally in air, water and soil. The most important sources of natural iodine are the oceans. About 400.000 tonnes of iodine escape from the oceans every year as iodide in sea spray or as iodide, hydrichloric acid and methyl iodide, produced by marine organisms. Much of it is deposited on land where it may become part of the biocycle. There are some iodine-containing minerals, such as alutarite, found in chile and iodargyte, found in colorado, nevada and new mexico. World-wide industrial production of iodine is about 13.000 tonnes per year, mainly in chile and japan, plus small amounts in russia and usa. Iodine is extracted from natural brines and oil brines, which have up to 100 ppm of the element or form chilean nitrate deposits. Known reserves of easily accessible iodine amount is around 2 million tonnes. Health effects of iodinemany medicines and cleansers for skin wounds contain iodine. iodine is a building material of thyroid hormones that are essential for growth, the nervous system and the metabolism. Humans that eat little to no bread can experience iodine shortages. The function of the thyroid gland will than slow down and the thyroid gland will start swelling up. This phenomenon is called struma. This condition is rare now as table salt is dosed with a little iodide. Large quantities of iodine can be dangerous because the thyroid gland will labour too hastily. This affects the entire body; it causes disturbed heartbeats and loss of weight.

We are offering mefanamic acid. systematic (iupac) name 2-(2, 3-dimethylphenyl)aminobenzoic acidcas number61-68-7 formulac15h15no2 mol. Mass241.285 gmol bioavailability : 90 % protein binding : 90 % mefenamic acid is a non-steroidal anti-inflammatory drug used to treat pain, including menstrual pain. It is typically prescribed for oral administration. mefenamic acid decreases inflammation (swelling) and uterine contractions by a still unknown mechanism. However it is thought to be related to the inhibition of prostaglandin synthesis. There is also evidence that supports the use of mefenamic acid for perimenstrual migraine headache prophylaxis, with treatment starting 2 days prior to the onset of flow or 1 day prior to the expected onset of the headache and continuing for the duration of menstruation.[1]since hepatic metabolism plays a significant role in mefenamic acid elimination, patients with known liver deficiency may be prescribed lower doses. Kidney deficiency may also cause accumulation of the drug and its metabolites in the excretory system. Therefore patients suffering from renal conditions should not be prescribed mefenamic acid.

We are offering esomeprazole sodium. Esomeprazole sodiumesomeprazole sodium cas : 161796-78-7esomeprazole sodium synonyms: s-omeprazole sodium formula: c17h19n3o3s na mol. Weight: 369.41 cas: 161796-78-7 standard: usp, ep application:esomeprazole is a proton pump inhibitor which reduces acid secretion through inhibition of atpase in gastric parietal cells. By inhibiting the functioning of this enzyme, the drug prevents formation of gastric acid.packing:25kgdrum or as required

we are offering omeprazole sodium. omeprazole sodium cas no. 95510-70-6 - specifications: uspep - gmp & dmf available - packaging 25 kgdrumomeprazole sodium that is used as anti ulcerant agent in making gastric drugs. this compound is freely soluble in water, alcohol, propylene glycol and soluble in methyl chloride.

Being one of the most renowned manufacturers, and suppliers of Lead Iodide from Mumbai, we are associated with the most reliable vendors in the market. Our team of professionals ensures that the Lead Iodide is processed and cleaned as per the latest techniques, and is of the finest quality. We supply Lead Iodide that is high in quality, and free from external contamination. The Lead Iodide is used as a detector material for photocell X-ray and y-ray detection. Our modern and technologically advanced transport facilities ensure prompt and safe delivery of the products to our esteemed customers.

 

General description : Lead (II) iodide has nonlinear optical, ferroelectric, and ferroelastic properties.It has a wide semiconducting band gap (Eg=2.3 eV) which enables low noise operation at room temperature and above. It has high X-ray and gamma ray stopping efficiency and has excellent environment stability.1
Lead(II) iodide or plumbous iodide is a bright yellow solid at room temperature, that reversibly becomes brick red by heating. In its crystalline form it is used as a detector material for high energy photons including x-rays and gamma rays.

 

Application : Used as detector material for photocell1 X-ray and y-ray detection.