Petroplus Inc.

Borivali West, Mumbai, Maharashtra

Hydroplus Hydraulic Aw Series are Premium High Performance Oils Intended for Industrial and Hydroplus Service Where Anti-wear Lubricants are Required. the Hydroplus Hydraulic Aw Series Oils are Designed to Satisfy the Performance Requirements for a Wide Range of Hydraulic Components in Systems Subjected to High-pressure, High-temperature Operating Environments. Their High Level of Resistance to Oxidation and Good Thermal Stability Characteristics Help Reduce Deposit Formation and Help Prevent Sluggish System Operation. They Provide Good Protection Against Rust and Corrosion in High Humidity Operations or Where Low Levels of Moisture are Unavoidable. They Separate Water Readily and have Very Good Air Release Properties. These Products Meet the Performance Requirements of a Wide Range of Hydraulic System and Component Oem's and are Compatible with the Pump and Component Metallurgy Used By Various Manufacturers.

We offer silicon grease . Taste & odourlessgood temperature behaviorneutral towards frothexcellent sealing compatibility

we offer Oxygen compatible grease.Use for driving equipmentOutstanding chemical resistanceWork swith heavy load & temperatureNon corrosive

Low friction coefficientTribo corrosionOffers optimum protection againstLong maintenance

Non flammableOptimum corrosion protection High ageing & oxidation stabilityVery good friction & wear

Taste & odourlessGood adhesionResistance to cold & hot waterExcellent protection against wear

Neutral towards frothPhysiologically harmlessExcellent propertiesWorks with high temperature

We offer SILICON FLUID .Low pour pointHigh surface activityGod viscosity & temperature behaviorHigh compressibility

We offer Fire resistance hydraulic fluid.Water solubleReduce operating costExtra lubricityAnti corrosive

We offer Heat transfer fluid.Reduce oxidationlow vapour pressureimproved heat transferminimum operating cost.

QUENCHPLUS 55 PRODUCTS DESCRIPTION Quenchplus 55 is blended from specially selected lube oil base stocks with inherent oxidation and thermal stability having high viscosity index, fluidity and low volatility. Quenchplus - 55 is a straight mineral type oil processing normal quenching characteristics. APPLICATIONS Quenchplus 55 is recommended for all normal quenching operations on variety of steels to impart desired hardness to components without distortions. It is advisable that oil-bath temperature is maintained at optimal level for best quenching performance and long service life. The recommended oil-bath temperature of 50 C - 65 C will meet most of quenching requirements. Quenchplus 55 is suitable for hardening of nuts, bolts, bearings and other components manufactured by automotive and light engineering industries. PERFORMANCE STANDARDS IS : 2664-1980 (reaffirmed 1993), Straight mineral type, grade superior. QUENCHPLUS 55 Appearance Clear & Bright Specific Gravity @ 29C 0.84- 0.860 Flash Point, COC, C 215-220 Kinematic Viscosity @ 40 C, cSt 30 Kinematic Viscosity @ 100 C, cSt 5.2 Viscosity Index 105 Pour point C max -15 PERFORMANCE BENEFITS Good quenching characteristics Imparts uniform hardness without distortion.

Thermoplus fine Heat Transfer Fluid product Description thermoplus Heat Transfer Oils are High Performance Products Intended for Use in Closed Indirect Heating Installations. They are Formulated from Highly Refined Base Stocks that are Resistant to Thermal Cracking and Chemical Oxidation. They have Good Heat Transfer Efficiency and Their Viscosities are such that They Can Be Pumped Readily At Both Start-up and Operating Temperatures. the Flash Points of These Oils Will Not Decrease Significantly in Service Because of Their Resistance to Thermal Cracking At the Operating Temperatures for Which They are Recommended. the Thermoplus Products are Very Thermally Stable and are Capable of An Extremely Long Service Life Without Deposit Formation or Viscosity Increase. They Demonstrate Specific Heats and Thermal Conductivities that Provide More Rapid Heat Dissipation. Thermoplus Heat Transfer Oils are Recommended for Use in Both Closed and Open, Cold-oil Sealed, Indirect Heating and Cooling Systems in all Kinds of Industrial Processes. features and Benefits thermoplus Oils are Important Member of the Petrelplus Brand of Specialty Fluids that have Gained a Reputation for Performance and Reliability, Even in Severe Applications. Application of the Most Modern Refining Techniques is a Key Factor in the Excellent Features of These Products applications application Considerations: Thermoplus Heat Transfer Oils Should Not Be Mixed with other Oils Since this May Impair the Excellent Thermal and Oxidation Stability of the Thermoplus Oils, Cause a Change in other Properties, and Complicate the Interpretation of Analyses Made to Determine the Oil's Useful Life. if the Oils are Used Above Their Recommended Maximum Temperatures, Vapor Lock May Result Unless the System is Designed to Operate At the Higher Temperature By Pressurizing with An Inert Gas such as Nitrogen. However, At Higher Temperatures, Fluid Life Will Be Shortened Because the Rate of Thermal Degradation Increases Markedly as Temperatures Rise Above the Recommended Limit. in Well-designed Systems the Temperature of the Oil Film Surrounding the Heating Element Should Be About 15c to 30c Above the Bulk Oil Temperature. if Higher Than This, the Service Life of the Oil May Be Shortened and Sludge and Coke May Be Deposited Which Would Interfere with the Heat Transfer Rates. as with other Mineral Oils, Thermoplus Heat Transfer Oils Should Be Used Only in Systems with Forced Circulation. Systems that Depend On Convection for Circulation of the Heat Transfer Medium Do Not Provide a Rapid Enough Flow to Prevent Local Overheating and Rapid Deterioration of the Oil. Further, These Oils are Not Recommended for Use in Open Systems Where Hot Oil is Exposed Directly to the Air. thermoplus Can Be Used in Open and Closed Installations Where the Bulk Oil Temperature Ranges are as Outlined in the Table Below and Where Minimum Shutdown Temperatures are Not Below -7c. bulk Oil Temperature Ranges for Thermoplus : Closed Systems (-7 C to 315 C), Open Systems (-7 C to 180 C) closed, Cold-oil Sealed, Indirect Heating and Cooling Systems in all Kinds of Industrial Processes Operating At Bulk Oil Temperatures Up to the Maximum Temperatures Quoted in the Table Above and At Atmospheric Pressure. open Systems Provided the Bulk Temperatures Do Not Exceed the Maximum Temperatures Quoted in the Table Above. available Packs: 210 Ltr.

We are offering Stanplus Ep Gear Oil 150, 220, 320, 460stanplus Ep Lubricants are a Family of Industrial Extreme Pressure Gear Lubricants. They are Formulated with High Quality Mineral Oils, Which Help Reduce Sludge Formation Helping to Increase Oil Service Life. Stanplus Ep Oils Contain a Sulphur / Phosphorus Extreme Pressure Additive System that Gives High Load Carrying Ability and Protection Against Wear. in Addition These Oils Provide Strong Protection Against Corrosion of Steel and Copper Containing Alloys and Resist Foaming. Stanplus Ep Oils have Good Water Handling Properties So that Water Rapidly Separates from the Oil for Easy Water Elimination.