Petron Thermoplast

Kamla Nagar, Agra, Uttar Pradesh

Diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ensuring an optimum linearity of the flow adjustment curve. The DK is extremely compact and very light.
The innovative handwheel is equipped with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in any position.

Main Features:

• High visibility graduated optical position indicator protected by a transparent cap with seal O-Ring
• Customisation plate - the customisation lets you identify the valve on the system according to specific needs
• Innovative handwheel with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in over 300 positions
• Handwheel and bonnet in high mechanical strength and chemically resistant PP-GR, providing full protection by isolating all internal metal parts from contact with external agents
• Floating pin connection between the control screw and diaphragm to prevent concentrated loads, improve the seal and extend its lifetime
• New design of valve body interior - substantially increased flow coefficient and reduced pressure drop. The degree of efficiency reached has also enabled the size and weight of the valve to be reduced
• Adjustment linearity - the internal profiles of the valve also greatly improve its characteristic curve, resulting in extremely sensitive and precise adjustment along the entire stroke of the shutter.

Type:

• Diaphragm

Function:

• Shut-off, regulating

Body:

• PVC U

Other characteristics:

• 2-way, compact

Temperature:

• Min = -20^oC (-4^oF)
• Max = 60^oC (248^oF)

Operating pressure:

• Min - 0 bar (0 psi)
• Max - 10 bar (145.04 psi)

DN:

• Min - 15 mm
• Max - 65 mm

CPVC diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ensuring an optimum linearity of the flow adjustment curve.extremely compact and very light.

Main Features:

•  Diaphragm actuator in PP-GR characterized by its robust construction. In the configuration Normally Closed, the upper part is equipped with steel reinforcement. Absence of metal parts exposed to the external environment prevents any risk of corrosion
• The special control diaphragm reinforced with fibres can reach up to 10 million drives without showing signs of wear
• High strength stainless steel stem with floating pin connection between the actuator stem and diaphragm to prevent concentrated loads, improve the seal and extend its lifetime
• New design of valve body interior: Substantially increased flow coefficient and reduced pressure drop. The degree of efficiency reached has also enabled the size and weight of the valve to be reduced. Adjustment linearity: the internal profiles of the valve also greatly improve its characteristic curve, resulting in extremely sensitive and precise adjustment along the entire stroke of the shutte.

Type:

• CPVC diaphragm

Operation:

• pneumatic

Function:

• shut-off, regulating

Applications:

• For the chemical industry

Other characteristics:

• Normally closed, for aggressive media, 2-way, compact

Temperature:

• Min = -20^oC (-4^oF)
• Max = 120^oC (248^oF)

Operating pressure:

• Min - 0 bar (0 psi)
• Max - 10 bar (145.04 psi)

DN:

• Min - 25 mm
• Max - 65 mm

CPVC  butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term reliability. This valve is also equipped with the customisable Labelling System.

Main Features:

• Ergonomic handle in HIPVC equipped with locking and unlocking device, release, quick operation and graduated adjustment in 10 intermediate positions (DN 40÷200). The operating range, starting from the first few degrees of valve opening, also guarantees extremely low pressure drops

• Customisable Labelling System: integrated module in the handle, made of a transparent protection plug customisable tag holder using the LSE set (available as accessory). The customisation lets you identify the valve on the system according to the specific needs

• Stainless steel square section stem completely isolated form the fluid complying with standard ISO 5211:
  • DN 40÷65: 11 mm
  • DN 80÷100: 14 mm
  • DN 125÷150: 17 mm
  • DN 200: 22 mm
  • DN 250÷300: 27 mm

• Body in polypropylene based compound reinforced with fibreglass (PPGR) resistant to UV rays and characterised by high mechanical strength

• Drilling pattern using oval slots that allow coupling to flanges according to numerous international standards. The special selfcentring inserts in ABS supplied for DN 40÷200 guarantee the correct axial alignment of the valve during installation. For DN 250÷300 valves, the drilling pattern for the selfcentring system is of the traditional type according to DIN and ANSI standards.

Type:

• CPVC butterfly

Operation:

• Lever

Function:

• Shut-off, regulating

Body:

• CPVC

Temperature:

• Min - 0^oC (32^oF)
• Max - 100^oC (212^oF)

Operating pressure:

• Min - 6 bar (87.02 psi)
• Max - 16 bar (232.06 psi)

DN:

• 11 mm, 14 mm, 17 mm, 22 mm, 27 mm

The butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling System.
In addition to manually operated version, also available in configuration with electrical actuator FE/CE or pneumatical actuator.
Produced using actuators complying with current regulations and selected by according to its requirements of quality and reliability.

• Disk in PVC-U with through shaft

• Zinc plated square section steel stem completely isolated from the fluid complying with standard ISO 5211:
  • DN 40 ÷ 65: 11 mm
  • DN 80 ÷ 100: 14 mm
  • DN 125 ÷ 150: 17 mm
  • DN 200: 22 mm

• Can also be installed as an end line valve, bottom discharge valve or tank dump valve
• The wafer valve can be transformed into a one-way Lug body valve thanks to the set of zinc plated steel inserts available as an optional extra
• Valve material compatibility (PVC-U) with water conveyance, drinking water and other food substances according to current regulations.
• Possibility of directly installing a gearbox or pneumatic and/or electric actuators with a standard drilling pattern according to standard ISO 5211 F05, F07, F10.

Type:

• UPVC butterfly

Operation:

• Electrically-actuated

Function:

• Shut-off, regulating

Media:

• for water

Temperature:

• Min = -10 °C (14 °F)
• Max = 55 °C (131 °F)

Operating pressure:

• Min - 0 bar (0 psi)
• Max - 16 bar (232.06 psi)

DN:

• 11 mm, 14 mm, 17 mm, 22 mm

Butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling System.

Main Features:

• Ergonomic multifunctional handle in HIPVC with the option for quick operation, graduated adjustment in 12 positions (every 7.5°). 180° reversible mounting
• Customisable Labelling System: integrated module, made of a transparent protection plug customisable tag holder using the LSE set (available as accessory). The customisation lets you identify the valve on the system according to the specific needs
• Drilling pattern with oval slots that allow coupling to flanges according to numerous international standards
• Interchangeable liner with the dual function of forming a hydraulic seal and isolating the body from the fluid.

Onepiece top flange with PVCU rack. Drilling according to standard ISO 5211 for direct drive:

• DN 40 ÷ 65: F05
• DN 80 ÷ 150: F07
• DN 200: F10

Type:

• butterfly

Operation:

• lever

Function:

• shut-off, regulating

Media:

• for water

Body:

• PVC

Temperature:

• Min - 0^oC (32^oF)
• Max - 60^oC (140^oF)

Operating pressure:

• Min - 4 bar (58.02 psi)
• Max - 16 bar (232.06 psi)

DN:

• 11 mm, 14 mm, 17 mm, 22 mm

PP-H Butterfly ValveGear Operate ANSI size from 2 to 24, lug type and wafer type fit standard ANSI B16.5 CL150. body made by material PP-H and seals by EPDM. PP-HButterfly Valvesuitable for industrial application and water supply, it has good property of corrosion resistance for chemicals, PP-H butterfly valve works temperature from 0 to 70 degree in generally, and pressure rate from 0.2Mpa to 1.0Mpa.

Application of PP-H Butterfly valve :

• Acid Fillings Stations
• Effluent Treatrnent/Disposal Plants
• Laboratories
• Refineries
• Automotive Industry
• Electroplating Plants
• Nuclear Research Centres
• Textile Mills
• Chemical Industry
• Food and Beverage
• Paper & pulp mills
• Thermal Baths
• Construction (Plumbing)
• Galvanizing Plants
• Pharmaceutical Industry
• Water Purification Pants
• Desalination Plants
• Industrial washing/bleaching lines
• Pickling Lines
• Packaging of Electrical Components

PP-H gear drive butterfly valve with following specifications:

Basic specication

Size: DN50DN400 (2 inch 16 inch)Wafer connection: DIN PN10; ANSI CL150; JIS 10KBody Material: PP-HDisc Material: PP-HSeal material: EPDM; NBR, NRDesign pressure: 0.21.0Mpa (PN210 bar)

Feature of valve

Steel frame inside of body and disc make strengthen the valve Electric and pneumatic actuator mounting are availableGear box has aluminium alloy and plastic shell for optional

PP-H Diaphragm Valveis a kind ofDiaphragm Valvemade by PP-H materials, diaphragm valve is one of the most important valves in industrial for shut off and control of pipe system, PP-H diaphragm valve with flange connection for ANSI CL150, JIS 10K and DIN PN10. pressure rate PN1.0 Mpa.UPP-H Diaphragm Valveis widely used in mining plant, water treatment, acid pickling, etc.

• Customisable Labelling System - built-in LCE module on the valve body made up of transparent protection plug and customisable tag holder using the LSE set (available as accessory). The customisation potential lets you identify the valve on the system according to specific needs.

• Optimised dynamic fluid design - energy savings thanks to the improved valve Kv value with consequent pressure drop reduction
• High surface finish ball shutter - wear reduction, increase in working life and reduced valve maintenance. Ideal for conveying dirty fluids, even with suspended solids and filaments thanks to the special design that permits internal valve selfcleaning
• Locked ball seat carrier - safe dismounting for maintenance with the Easyfit multifunctional handle or Easytorque kit
• Ideal for horizontal installations - perfect seal even with low back pressure. Silent and durable even with strong vibrations and pulsating fluid
• PVCU shutter and springs available made of STAINLESS steel 316, Hastelloy C276, A316 PTFE encapsulated - maximum reliability in a wide field of applications from salt water to aggressive acids.

Type:

• Spring, ball

Material:

• UPVC

Temperature:

• Min - 0^oC (32^oF)
• Max - 60^oC (212^oF)

Operating pressure:

• Min - 0 bar (0 psi)
• Max - 16 bar (232.06 psi)

DN:

• Min - 10 mm
• Max - 50 mm

PP-H Check Valve :True UnionPP-H Ball Check ValvePP-H model is a ball typeCheck Valvewith true union end, socket connection as per standard DIN, ANSI, JIS, CNS, BS. seat and sealed by EPDM o ring, ball with solid type make the valve sealing better. PP-H trueUnion Ball Valveis easy to install and replace, it is suitable for vertical installation, used for water supply, water treatment, agriculture irrigation, finishing farm, etc.

Application of PP-H Check Valve :

• Acid Fillings Stations
• Effluent Treatrnent/Disposal Plants
• Laboratories
• Refineries
• Automotive Industry
• Electroplating Plants
• Nuclear Research Centres
• Textile Mills
• Chemical Industry
• Food and Beverage
• Paper & pulp mills
• Thermal Baths
• Construction (Plumbing)
• Galvanizing Plants
• Pharmaceutical Industry
• Water Purification Pants
• Desalination Plants
• Industrial washing/bleaching lines
• Pickling Lines
• Packaging of Electrical Components

Basic specicationSize:DN15DN50 (1/2 inch 2 inch)Body Material:PP-H -U;PP-H -C;PP-HSeal material:EPDMSocket connection:DIN, ANSI, JIS, CNSDesign pressure:1.0Mpa(PN10 bar)

Feature of valveBall orbital design lower the valve leaking risk. Double union design easy to replace and install of valves Hollow ball design make the valve seal better Simple structure make it easy to diagnose problem and repair valve Flange end is optional.

Foot valve allows the passage of fluid in one direction only.

• Connection system for solvent weld and threaded joints
• No metal parts in contact with the fluid
• Piston with incorporated counterweight able to work with high intensity fluid
• Limited pressure loss. Only minimum back pressure is required for the hermetic seal
• Valve material compatibility (PVC-U) with water, drinking water and other food substance conveyance according to current regulations
• Can be maintained with the valve body installed

Material:

• UPVC

Other characteristics:

• Foot

Temperature:

• Min - 0^oC (32^oF)
• Max - 60^oC (140^oF)

Operating pressure:

• Min - 0 bar (0 psi)
• Max - 16 bar (232.06 psi)

DN:

• Min - 10 mm
• Max - 50 mm