Delhi, India
Our Products
Our Complete range of products are Hand Operated Sieve Shaker, Sieve Shaker Rotap, Sieve Shaker Gyratory and Sieve Shaker Hand Operated.
This is a bench type model which is portable, sturdy and convenient for bench mounting. The side to side movement to the carrier which can take up to 7 sieves of 20cm diameter is through a chain of gears operated by a hand wheel.
This Shaker reproduces both circular and tapping motion, Produces Circular (280-320 RPM approx) and tapping (140-160 RPM approx) motion with a uniform mechanical action which ensures accurate and dependable test results. This shaker is heavy in construction and no special foundation is required. The running parts operate in oil. A 1/4 H.P. electric motor runs the machine; the machine can accommodate six test sieves + set of Lid-pan but is supplied without sieves.
This sieve shaker is designed to carry up to 7 sieves of 6 inch or 8 inch diameter. The 12 inch dia.sieves can be used with the help of Adaptor. A 1/4 HP. motor through a reduction gear immersed in oil drives the shaker. The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop-pin below the table is removed. The shaker can have a rotary motion. In addition to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder is supplied. The holder can be fixed on the top of the upper most sieves, and thus the sieve set is firmly held. Suitable for operation on 230 volts, 50 cycles single phase A.C. Supply.
This sieve shaker is designed to carry up to 7 sieves of 18" diameter. The shaker is driven by a 1/2 H.P.Electric Motor through a reduction gear. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction, in addition to this gyratory motion of the table, there is an upward and downward movement at a frequency of about 270 vibrations per minutes ensuring that each square inch of the sieve is utilized. The whole gear mechanism runs in an oil bath, without test sieves or time switch. Suitable for operation from 220 Volts 50 cycles A.C. supply.
This is a bench type model which is portable, sturdy and convenient for bench mounting. The side to side movement to the carrier which can take up to 7 sieves of 20cm diameter is through a chain of gears operated by a hand wheel.
