Verified
Write a Review
Our Products
We are leaders in the market for providing best range of Conductivity Tester, Surface Roughness Tester, Shrinkage Limit Set, Cobb Tester and Adhesion Tester
Product Description
Equipped with a wider conductivity range that lets you measure from pure water to waste-water, Eutech’s new auto-ranging tester now comes with simultaneous temperature readouts and easy automatic calibration for selected ranges. Signature features such as automatic temperature compensation and manual calibration, are retained, giving you accurate, reliable readings over a broad conductivity range every time you measure.
Features:
Our offered product Surface Roughness Tester, when measure roughness of surface, then pickup is placed on the surface of the part and then tracing the surface at constant rate. The pickup acquires the surface roughness by the sharp stylus in pickup. The roughness causes displacement of pickup which results in change of inductive value of induction coils thus generate analogue signal which is in proportion to surface roughness at output end of phase-sensitive rectifier. This signal enters data collection system after amplification and level conversion. After that, those collected data are processed with digital filtering and parameter calculation by DSP chip and the measuring result can be read on LCD, printed through printer and communicated with PC.
Features:
Shrinkage limit is the maximum water content at which a reduction in water content does not cause an appreciable reduction in volume of the Soil Mass. At shrinkage limit, on further reduction in water, air enters in to the voids of soils and thus keeps the volume constant. The apparatus can be used to determine shrinkage limit and to calculate other shrinkage ratio, shrinkage index and volumetric shrinkage.
Specification :
Set consists of one each :-
1. Porcelain evaporating dish2. Shrinkage dish3. Glass cup4. Perspex plate with three metal prongs5. Flexible spatula 100mm6. Glass cylinder7. 25ml x 1ml, supplied without mercury
OPTIONAL ACCESSORIES:
Mercury supplied in bottle of 500 gms. at an extra cost.
Product Description
Determines water absorption/penetration (cobb value) which is the quantity of water in mgs absorbed by surface of 100 cm2 of the specimen on one side only in a specified time under a specified head of water.
Supported by a team of skilled and experienced professionals, we have been capable of offering efficient Adhesion Testers. Under the strict supervision of our expert professionals, these instruments are manufactured using finest grade raw material in compliance with industry defined standards. Moreover, the product undergone under these services are stringently checked prior to their dispatch so as to ensure delivery of only high grade range.
Features:
The ability of elevated heels of ladies shoes and sandals to withstand repeated lateral impacts without breaking off is determined by holding the heel in a suitable holder and giving repeated impacts of specified impact energy near its lower edge. The test is continued till the time the heel fractures, or till a total number of 20, 000 impacts is given to the heel under test. The number of impact after which the heel fractures gives a measure of the Fatigue Resistance of the heel under test.
Ross Flex Testers are widely used by the clients to cater to the testing requirements in an efficient manner. Pierced strip test specimen is freely bent over a rod to an angle of 90o and further cut length is frequently measured at different intervals for the purpose of determining cut growth rate. Besides, special shaped piercing tool initiates the cut. Testing estimates the ability of rubber vulcanised for resisting crack growth of a pierced specimen. There is no exact correlation between the test results and service is implied for varied nature of service conditions.
Procedure:
Report:
The Shoe Flex Tester is used for determination of the ability of the full shoe to withstand the effect of flexing stresses produced on the different parts of the shoe. Although the various parts like uppers and soles of a shoe are tested separately for flexing endurance with the help of flexometer and Ross flex tester, the shoe flex tester gives results, which are more related to the actual performance of the shoe as a whole.The Shoe Flex Tester simulates the effect of actual walking action on the shoe. The test specimen is held rigidly at the toe portion using a suitable toe last and clamp, while the heel portion has a separate last on which the shoe is firmly tied as in actual use.The upper end of the sslast has an arrangement to connect a suitable link mechanism. The link mechanism is connected to an eccentric pin on a rotating block to give the link a to-and-fro movement. Both the eccentricity of the pin in the block and the length of the link are adjustable.
We are among the established names in the industry, engaged in manufacturing and supplying Split Tear Tester for our revered customers. These testers are acknowledged for their flawless design and are acknowledged for delivering optimal performance. Extensively used for determining the tearing strength of rubber soles, these testers are highly demanded in the market.
Microcellular sheets used in the manufacture of hawai chappals and shoe soles shall be resistant to slitting if they get split across their thickness. The ability of microcellular rubber sheets and soles to resist propagation of splits is determined by splitting a rectangular test specimen taken from the sheet or sole under test across its thickness and pulling the two split ends away from each other. The maximum load exerted before failure gives the measure of the resistance of the sheet or sole under test to splitting.
Specifications:
The Color Fastness Tester is constructed on a rigid fabricated frame. Rubbing is carried out by rotating a felt pad against a test specimen placed on an anvil. The felt pad is held in a rotating holder with the help of three sharp needles and can be raised and lowered with the help of a lever to bring it in contact with the test specimen.
Motion to the felt pad is given by an AC synchronous motor and belt-pulley arrangement. The sleeve in which the rod carrying the rotating holder slides is mounted on two ball bearings to give it a long and trouble-free running life. Weights are provided to apply the specified forces on felt pads for both dry and wet rubbing.The test specimens are normally kept on a flat platform under the rotating felt pad. However, for testing of finished products, provision has been made to replace the flat platform by a small circular anvil that can accommodate various finished products like shoulders of garments and shoes.
A four-digit electronic counter with re-set counts the number of abrading rubs of the felt pad. The counter operates only when the felt pad is lowered on to the test specimen.The tester is finished in shore blue metallic painting and bright chromium or zinc plating to give it a corrosion resistant finish.
The most commonly used method to evaluate print quality is by rubbing 2 printed surfaces against each other. However if this is done manually, the amount of pressure applied during rubbing cannot be quantified and kept constant. Moreover it is difficult to keep the plane of contact constant and keep a track of the number of rubs. Hence making this method highly Operator Dependent.
Features
Widely used in the Packaging Industry for labels put on bottles, boxes and laminated packaging.It gives fast, repeatable and accurate results.Simple and easy to operate.Buzzer prompts automatically when test is completed.High efficiency.Low maintenance.
We are well-known manufacturer and supplier of Water Resistance Tester. In this testing machine the test specimens are held in form of thoughts between two cylindrical grips one of the grips is then repeatedly moved towards and away from the other along their common axis .the test specimens are kept immersed in a water bath unto a part of their periphery. Penetration is detected when electric conductivity is established between the inside and outside surfaces of the test specimens.
The Water Vapour Permeability Tester is made of twelve brass bottles. It measures water vapour permeability of leather. The bottles have nut of circular opening. The bottles are mounted on the bottles holders which rotate at specified revolution per minute with the help of motor pulley & belts.
The axis of the bottles is parallel to the axle of the bottles holders. A fan mounted in front of the mouths of the bottles and consisting of three blades in planes that is inclined at 120 to one another. The planes of the blades pass through the prolongation of the axle of the wheel.
A pre set digital timer is mounted for setting total no. Of hours of instrument movement. All the components are chrome/ zinc plating & painting for corrosion resistance long life.
The weight of water vapours absorbed by a sample of leather is determined by fixing a circular piece of leather over a cylindrical cavity in a metal container having distilled water inside it. The test specimen is held firmly against the lip of the cavity and allowed to come in contact with the vapours left off by the water for a specified period of time. The gain in weight of the test specimen because of absorption of vapours by it is determined, from which the value of water vapour absorption is calculated.
Features:
High precision mA leakage measuring.* ACA 40 mA x 0.01 mA* ACA 400 mA x 0.1 mA* ACA 40 A, 120 A.* Ohms, Diode, Continuity beeper, hold.* AC voltage, DC voltage.* LCD display.* DC 1.5V battery (UM-3, AA) x 2.
Backed by rich industry expertise, we are offering our clients high quality Soil pH Meter. Ideal instrument for measuring pH in soil, these meters are highly recommended for use in various industries. In order to cater to the requirements of the clients, we offer this range in varied specifications.
Features:
Hardness Tester is designed for hardness measurement on steels and other ferrous materials and also on non ferrous materials like Brass, Bronze, Aluminium, etc. The material can be cast, forged or rolled and the shape can be flat, round or irregular. The actual load application system is of dead weight type combined with mechanical lever system. The supporting hydraulic system is for initial lifting of load before each test and a damping the load application system for smooth application of load. A separate hydraulic power pack, positioned in the bottom part of the machine increases the machine stability. Our unique design of a floating fulcrum lever system ensures high accuracy and dependability.
The machine accuracies confirm to IS: 2281-2005 & BS:240.
Our qualitative range of sand content kit is known in the industry for its effectiveness and longer functional life. Furthermore, we are offering this easy to use content kit to our clients at competitive market prices. This content kit is designed by our team of highly qualified professionals using latest technology and quality material.
Our organization has gained the expertise in offering a wide range of single fiber strength testers, which is highly demanded in the international market. These testers are fabricated using quality raw material, sourced from reliable vendors. These testers are generally used to determine the breaking load and extension up to 500 centi-grams force. However, these products are electronically operated with mechanical action and thus are provided with scales 0-500cg force.
Determine flexibility of painted panels which are clamped and formed round the conical mandrel by rotation of the roller frame.
Mandrel marking from 37 mm to 6 mm diameter. After test the panels are examined to determine minimum diameter at which failure by elongation occurs.
Complies with :
ASTMD 522, BS3900-E11, ISO 6860
Fineness Grind Gauge is to indicate the fineness of grind or the presence of coarse particles in a sample. It does not determine particle size distribution.
Fineness Grind Gauge are used in controlling the production, and application of dispersion products produced by milling in the Paint, Plastic, Pigment, Printing Ink, Paper, Ceramic, Pharmaceuticals, Food.
It is flat steel block in the surface of which are two flat-bottomed grooved varying uniformly in depth from a maximum at one end of the block to zero near the other end. Groove depth is graduated in micron and Hegman Scale.
Melt Flow Index Apparatus for plastic measures the melt flow index of plastic material. The system consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruder tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The heater logged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with a insulation of PTFE to prevent sticking of the extrudate. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER & other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extrudate are also supplied with the equipments.
The distance between the driving and the flexing rollers can adjusted with the help of a screw arrangement to enable the belt to be mounted over different flexing rollers and to allow for small differences in belt length. This is done by turning a hand wheel on the side of the tester.The tester is fitted with an acrylic front cover and a wire mesh safety guard, which allows adequate circulation of cooling air round the test specimens during the test. For safety of the user, the motor can be started only when cover is closed.
The Pencil Hardness tester is the most common but also the most inconsistent technique to measure the hardness of a coating. This test conduct scratch hardness tests to determine the resistance of coating material in order to prevent the scratches on the surface. Furthermore, pencils of various degrees of hardnesses are made to move all over the surface under a fixed pressure and angle. The pencils that damage the surface are taken as the final measurement of scratch hardness. We will also supply all range of Pencil for Hardness Test like : 6B, 5B, 4B, 3B, 2B, B, HB, H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 8H, 9H, F.
Scratch hardness tests is to determine the resistance of coating materials to scratch effects on the surface.
In the test, pencils of various degrees of hardness are moved over the surface under a fixed pressure and angle to the surface. The degree of hardness of the pencil which damages the surface is taken as a measurement of scratch hardness e.g. 3H hardness.
We offer Scratch Tester, which is a motorized apparatus. These testers are dedicated for coating hardness evaluation, which is based on method of scratching resistance. A panels of tests is clamped and moved slowly, while a stylus or alternative tool scratches the surface. To obtain different degrees of failure, from trace to destruction, specified or variable loads can be applied depending on test procedures. A voltmeter helps in indicating the contact of the tool with the metallic sample substrate. Maximum size of the panel is 1001501.6 mm ( 0.3 mm coating).
Used to simulate wear and tear on coatings and materials of all types, these instruments use the principle of spinning a test sample under abrasive wheels.
These wheels may be made of many different materials including rubbers, wool, felt, sand paper, tungsten carbide and vitrified clay.
A wide range of abrasive wheels are available along with a grit feeder suitable for use with ASTM F510, D4060.
Complies with BS3900; E15, ISO 778
Essential for quality control and development for consumers of corrugated and solid fiberboard, shipping containers, etc. Ascertains transport worthiness of the container.
OperationA box attached to a vertical column is provided with mechanism to release the resting table instantaneously. For easy adjustment of the drop heights this box is balanced by a counter-weight over a pulley. Package under test is placed on the resting table. By pressing the lever on the box, the package is allowed to fall on the platform at the bottom. The fall is straight and perfectly vertical. The machine is sturdy and easy to operate.
Technical Specifications of Mechanical Model Additional Features of Pneumatic Model:
This method measures the force perpendicular to the plane of the paper required to tear multiple sheets of paper through a specified distance after the tear has been started using an Elmendorf type tearing tester. The measured results can be used to calculate the approximate tearing resistance of a single sheet. Measuring Unit: Nm
Significance:
When paper is subjected to high stresses in converting machine operation and handling equipment, good tearing resistance is very important. Also to achieve a higher puncture resistance result of the board, a higher tearing of the paper is desired.
Features:
Indication of energy required to make a tear on digital LCD displayPneumatic clamp mechanism exerts sufficient & fixed pressure to disallow any slippage of the test specimen.Useful for testing wide range of testing materials- from thin paper to thick paper and other similar materials.Adjustable incision blade to give precise tearing length according to the test standardChoice of any one of three interchangeable pendulums (800, 1600 and 3200) to analyze material of variable strength & thickness.(Optional)
Accessories :
One Pendulum of your choice.Sample cutter to cut sample to exact size as specified in the standards.Calibration check weight.
Dimensions :
We are among the illustrious names in the industry, engaged in offering Quadrant Scale GSM Tester for our treasured customers. These scales are compatible with a wide range of materials like paper, fabrics, plastic films and sheets. Providing accurate measurement of the weight per square metre of the subjected materials, these scales help in determining the quality of these materials.
Specifications:
Features:
Specifications:
All Stainless Steel, FlammabilityTester with Stainless Steel Brushing device. This latest model has changed internal designs to undertake large number of Testing conveniently in a Short Time. The unit adheres to ASTM D-1230 & other International Standards
Stainless Steel Test Cabinet with clear Observation Panel. The unit has DIGITAL Timer for automatic Timing of flame speed. Supplied with 5 Nos. Stainless Steel Specimen Holders, Clips for fixing the Specimen, Clips for Micro Switch Operation, Dead Weight, 2 Nos. Guages, empty Gas Cylinder, Gas Pipe with Stainless Steel Clamps along with Brushing Device. Complete unit with a CALIBRATION CERTIFICATE, Traceable to NPL, along with an Inspection and Conformance Certificate.
Our customers can avail from us impact resilience testers that are known for their quality and long service life. These testers are highly demanded all over the world among rubber industries. These testers are playing an active role in the determination of the elasticity of elastomeres, soft elastic foamed materials. In addition to it, these testers are comprised of basic bench with anvil and exchangeable anvil plate. Offered at nominal rates, these impact resilience testers are highly appreciated by clients.
Offering a wide range ofIRHD Rubber Hardness Tester. First specimen to come in contact, first with the pressure foot and later with the indenting tip under the specified contact load. Further movement of the platform causes the indenting load to act on the test specimen. Penetration of the indenting tip into the test specimen is determined with the help of a dial gauge fitted at the top of the pressure foot assembly. The contact between the dial gauge and the top of the plunger rod is made through an electrical arrangement to ensure that the weight of the stem of the dial gauge does not act on the test specimen. An electric buzzer is provided to slight vibrations to the plunger rod to eliminate friction. The dial gauge gives the depth of indentation in units of 0.01 mm which can be converted into IRHD hardness value.
We are an eminent name, which is engaged in offeringShore Hardness Testerto the clients. The offered range of shore hardness testers is best suited for plastics, Formica, epoxies & Plexiglas Additionally, the offered range of shore hardness testers is ideally used to find out the indentation hardness of material from soft rubber to rigid plastics. The shore A of this range is known for measuring the hardness of of rubber, elastomer and other rubber like item such as neoprene, silicone, vinyl, soft plastics, felt, leather & similar material.
Features:
Suitable fordetermining the indentation hardness of materials from soft rubber to rigid plastics.
Shore Ais designed to measure the penetration hardness of rubber, elastomers and other rubber like materials such as neoprene, silicone, vinyl, soft plastics, felt, leather & similar materials.
Shore Dis designed for plastics, formica, epoxies & plexiglass, etc.
Specification
Fruit Pressure Tester Made in Italy0-13 kg (0-29 lb)This Tester provides an accurate guide to determine the right period for fruitharvesting and monitors maturation progress during cold storage.
Capacity: 20 Kg /44 Lb. /196.10 Newton
Our clients can avail a wide range of folding endurance testers that is used for determining the folding endurance of all kinds of paper, cardboard, foil and films up to 0. 15 mm. These testers are well known for their sturdiness, light weighted and compactness. Moreover, these folding endurance testers also determine the number of folds and thus provide maximum client satisfaction.
Linear Shrinkage Tester is designed for the heat shrinkage test and size stability test of films, leather, heat shrinkable pipelines, medical PVC sheets, back sheets and other materials in liquid medium at various temperatures.
Features of Linear Shrinkage Tester
Mr. Rajendra Prasad Modi (proprietor) (Perfect Instruments Corporation)
A 5 Ameya Sankul Ramdas Colony Road Near Canada Corner Opp. Seva Hospital - , Nashik, Maharashtra - 422005, India
Share us via
View Contact Number 
