We can Supply all types of Rubber Gaskets made of Natural Rubber, Neoprene, Nitrile, EPDM, Butyl, Polybutadiene, Silicon, Flourocarbon, Chlorosulphonated Polyethylene, Styrene Butadiene Rubber etc.& Also supply All Types Of Rubber sheet / Sponge Sheets.

We can Supply with or without reinforcement to suit to different operating pressure and temperature. Reinforcements are like wire mesh, metal, Natural and Synthetic Fabrics etc. which are provided against specifications, thickness suitable to service conditions, and suitably moulded to all flange dimensions as fullface and flat face and Blind Gaskets, O ring, cord, Rod,

In colors like black & white or red

Our Rubber Gaskets have been used in Petroleum Refineries, Process Industries, Food Processing units etc.

Metal jacketed gaskets specially designed as Heat Exchanger Gaskets are widely used on smooth flange applications. They are ideal for Heat Exchangers, Auto claves, columns, flue stacks, boilers, gas mains, valve bonnets, pumps and similar services.

Camprofile gaskets used as Heat Exchanger Gaskets consists of a metal core with concentric grooves on either side with sealing materials. The Sealing layers (depending on the service duty) can be Graphite, PTFE (Teflon), CAF or Metal (e.g. Aluminium or Silver). Camprofiles can be used without sealing layers to provide an excellent seal but here is a risk of flange surface damage.

The Very wide seating stress range (minimum to maximum stress) of the Camprofile gasket makes it

Soft Iron, S.S. 304, S.S. 316, S.S. 304L, S.S. 316L, Low carbon steel, Monel Aluminium, Copper, Brass, Cupronickel 90%/10%, 70%/30%, Inconel 600, 800 and different grades of Stainless Steel.

Common filler materials used are Asbestos mill board, CAF, Non asbestos, PTFE and Grafoil. We have adequate capacity to produce any shape and size with many compartmental ribs out of different materials for heat transfer equipment, coolers, condensers, joints etc.Heat Exchanger gaskets are more compressible than sole-

Ring Type Joints are primarily used by the oil, gas, petrochemical and offshore industries, they are also commonly used on valve, pipe work assemblies and with some integrity vessel joints. Ring type are use to seal flanged connections subject to high pressures and temperatures. These precision made solid metal gaskets form a metal to metal seal with the flanges. The gasket cross-sections are designed to concentrate the bolt load over a small area to produce a high seating stress. The gasket metal should always be softer than the mating flanges. The high seating stress causes 'plastic-flow' of the gasket into the flange faces to create seal. The 'RX' and 'BX' gaskets are designed to be pressure activated by the sealed media which improves the efficency of the seal as the internal pressure of the system increases.

Stock materials include Soft Iron, Low Carbon Steel, F5, F11, F9, 304, 304L, 316, 316L, 321, 347, DUPLEX, Monel, NICKEL, 410, Inconel and Incoloy.

The Very wide seating stress range (minimum to maximum stress) of the Camprofile gasket makes it

nsulation Kit Gaskets are designed to combat the effects of corrosion often found in flanged pipe system. Galvanic corrosion between dissimilar metal flanges, flange insulation associated with cathodic protection of underground piping are other examples where insulating Kit Gasket can be put to effective use.

The Design and selection of materials used in Flange Insulation Kit Gasket, meet the twin purpose of sealing the flanges and insulating metal parts to prevent flow currents responsible for corrosion.

We design, manufacture & supply Flange Insulating Kit Gasket in three types:

We manufacture superior quality Graphite Gaskets to the varying requirements of our customers in Domestic as well as International markets. These Graphite moulded Rings are manufactured from 100% graphite containing no binder or fillers. Graphite Gaskets can be manufactured to any size, shape, profile as per Drawing from Sheets.

The Graphite Gaskets provided by us are the most resilient gaskets for flanges. These gaskets are manufactured from 100% graphite containing no binder or fillers. The Graphite Gaskets are specially designed to provide the desired compression with high percentage recovery and low creep relaxation.

Camprofile gaskets consist of a metal core (generally Stainless Steel) with concentric grooves on either side with sealing materials. The sealing layers (depending on the service duty) can be Graphite, PTFE (Teflon), CAF or Metal (e.g Aluminium or Silver). Camprofile's can be used without sealing layers to provide an excellent seal but there is a risk of flange surface damage.

The very wide seating stress range (minimum to maximum stress) of the camprofile gasket makes it

Envelope gaskets are also available with Asbestos / Non-asbestos & Steel Filler.

We can Supply all types of Rubber Gaskets made of Natural Rubber, Neoprene, Nitrile, EPDM, Butyl, Polybutadiene, Silicon, Flourocarbon, Chlorosulphonated Polyethylene, Styrene Butadiene Rubber etc.& Also supply All Types Of Rubber sheet / Sponge Sheets.

We can Supply with or without reinforcement to suit to different operating pressure and temperature. Reinforcements are like wire mesh, metal, Natural and Synthetic Fabrics etc. which are provided against specifications, thickness suitable to service conditions, and suitably moulded to all flange dimensions as fullface and flat face and Blind Gaskets, O ring, cord, Rod,

In colors like black & white or red

Our Rubber Gaskets have been used in Petroleum Refineries, Process Industries, Food Processing units etc.

Metal jacketed gaskets specially designed as Heat Exchanger Gaskets are widely used on smooth flange applications. They are ideal for Heat Exchangers, Auto claves, columns, flue stacks, boilers, gas mains, valve bonnets, pumps and similar services.

Camprofile gaskets used as Heat Exchanger Gaskets consists of a metal core with concentric grooves on either side with sealing materials. The Sealing layers (depending on the service duty) can be Graphite, PTFE (Teflon), CAF or Metal (e.g. Aluminium or Silver). Camprofiles can be used without sealing layers to provide an excellent seal but here is a risk of flange surface damage.

The Very wide seating stress range (minimum to maximum stress) of the Camprofile gasket makes it

Soft Iron, S.S. 304, S.S. 316, S.S. 304L, S.S. 316L, Low carbon steel, Monel Aluminium, Copper, Brass, Cupronickel 90%/10%, 70%/30%, Inconel 600, 800 and different grades of Stainless Steel.

Common filler materials used are Asbestos mill board, CAF, Non asbestos, PTFE and Grafoil. We have adequate capacity to produce any shape and size with many compartmental ribs out of different materials for heat transfer equipment, coolers, condensers, joints etc.Heat Exchanger gaskets are more compressible than sole-

Ring Type Joints are primarily used by the oil, gas, petrochemical and offshore industries, they are also commonly used on valve, pipe work assemblies and with some integrity vessel joints. Ring type are use to seal flanged connections subject to high pressures and temperatures. These precision made solid metal gaskets form a metal to metal seal with the flanges. The gasket cross-sections are designed to concentrate the bolt load over a small area to produce a high seating stress. The gasket metal should always be softer than the mating flanges. The high seating stress causes 'plastic-flow' of the gasket into the flange faces to create seal. The 'RX' and 'BX' gaskets are designed to be pressure activated by the sealed media which improves the efficency of the seal as the internal pressure of the system increases.

Stock materials include Soft Iron, Low Carbon Steel, F5, F11, F9, 304, 304L, 316, 316L, 321, 347, DUPLEX, Monel, NICKEL, 410, Inconel and Incoloy.

The Very wide seating stress range (minimum to maximum stress) of the Camprofile gasket makes it

nsulation Kit Gaskets are designed to combat the effects of corrosion often found in flanged pipe system. Galvanic corrosion between dissimilar metal flanges, flange insulation associated with cathodic protection of underground piping are other examples where insulating Kit Gasket can be put to effective use.

The Design and selection of materials used in Flange Insulation Kit Gasket, meet the twin purpose of sealing the flanges and insulating metal parts to prevent flow currents responsible for corrosion.

We design, manufacture & supply Flange Insulating Kit Gasket in three types:

We manufacture superior quality Graphite Gaskets to the varying requirements of our customers in Domestic as well as International markets. These Graphite moulded Rings are manufactured from 100% graphite containing no binder or fillers. Graphite Gaskets can be manufactured to any size, shape, profile as per Drawing from Sheets.

The Graphite Gaskets provided by us are the most resilient gaskets for flanges. These gaskets are manufactured from 100% graphite containing no binder or fillers. The Graphite Gaskets are specially designed to provide the desired compression with high percentage recovery and low creep relaxation.

Camprofile gaskets consist of a metal core (generally Stainless Steel) with concentric grooves on either side with sealing materials. The sealing layers (depending on the service duty) can be Graphite, PTFE (Teflon), CAF or Metal (e.g Aluminium or Silver). Camprofile's can be used without sealing layers to provide an excellent seal but there is a risk of flange surface damage.

The very wide seating stress range (minimum to maximum stress) of the camprofile gasket makes it

Envelope gaskets are also available with Asbestos / Non-asbestos & Steel Filler.