Our Products
Conveyors & Conveyor Components
2 Products availableRubber Sheet
1 Products availableConveyors
1 Products availableElevator Parts
1 Products availableOur Complete range of products are Conveyor Belt, Rubber Conveyor Belt, general purpose belt, Super Abrasion Resistant Belt and Rough Top Conveyor Belt.
Conveyor Belts and Systems have been helping to ensure the prosperity and growth of the manufacturing industry globally since decades. These belts are meant to carry and convey material from point A to point B.
The design of general purpose conveyor belts enables application in all areas of materials handling. Due to the carcass construction and quality of cover, these belts are noted for their reliability and long life in all industrial applications, either for general purposes or handling of sharp-edged and extremely abrasive materials. They are reinforced with superior quality of Nylon/EP fabric. Our General Purpose Rubber Belt Conveyors are designed from a special combination of natural & synthetic materials, selected textile fabrics and polymers.
Application
General Purpose Belt
General Purpose | Tensile Strength | Elongation at Break | Maximum Abrasion Loss | Polymer / Rubber | Working Temperature Range |
---|---|---|---|---|---|
Mpa | % Minimum | MM3 | Degrees Centigrade | ||
N17 or RMA II | 17 | 4.5 | 180 | NR | - 45 to + 50 |
Y | 20 | 4 | 150 | NR | - 45 to + 50 |
M24 or RMA I | 24 | 4.5 | 125 | NR | - 45 to + 50 |
X | 25 | 4.5 | 120 | NR | - 45 to + 50 |
Super Abrasion Resistant are meant to exhibit superior cover protection to highly abrasive materials being conveyed. These belts are extensively used in mining and mining related industries, including steel, non ferrous metal plants, cement plants, thermal power plants, quarrying and aggregate processing and several other industrial applications.
Super Abrasion Resistant
Super Abrasion Resistant | Tensile Strength | Elongation at Break | Maximum Abrasion Loss | Polymer / Rubber | Working Temperature Range | Application |
---|---|---|---|---|---|---|
Mpa | % Minimum | MM3 | Degrees Centigrade | |||
SAR or W | 18 | 4 | 90 | PBR Blend | - 45 to + 50 | Extremely abrasive material such as cold clinker, cold sinter, mortar, hardrock, etc. |
SAR+ or A | 17 | 4 | 70 | PBR Blend | - 45 to + 50 | Extremely abrasive material such as cold clinker,cold sinter, mortar, hardrock, etc. |
E | 14 | 3 | 150 | NR | - 45 to + 50 | For materials likely to generate static electricity like grain, coal etc. |
Cut & Gouge | 26 | 4.5 | 110 | NR | - 45 to + 50 | For handling large and sharp edge materials requiring superior reistance to cutting, gouging and abrasion. |
Bucket Elevator Belts are an integral part of the Conveyor Rubber Belts variety. They are smaller in width, have more no. of plies and are used upside down to support the weight of buckets which are bolted to the surface of these belts.
Specifications of these belts generally depends upon the weight of buckets to be bolted on these belts. Very commonly used rating is 400/4 with 2mm top & 4mm bottom covers. However, these specifications can be elevated to higher ratings up to 1000/4 with 2mm top & 5 mm bottom for heavier buckets which carry heavy quantities of materials.
Very common use of these belts is in the Rice Industry where rice is delivered from point to point & even conveying the final product to Silos where it is stored.