Write a Review
Our Products
Fasteners
1 Products availableMetal Alloys
1 Products availableMetal Angle
1 Products availableSteel & Steel Products
1 Products availableFlanges
1 Products availablePVC, PP & Plastic Products
1 Products availableButt Weld Pipe Fittings
1 Products availableHospitality Service
1 Products availableOur product range contains a wide range of Sheets & Plates, Non Metals and Stainless Steel
| Stainless & Duplex Steel |
| |
| Nickel & Copper Alloy |
| |
| Carbon & Alloy Steel |
| |
| stainless & duplex steel | |||||
| range15 nb up to 1200 nb in sch 5s , 10s , 10, 20 , 40s , 40 , std , 60 , 80s , 80 , xs , 100 , 120 , 140 , 160 & xxs formseamless / erw / welded in round & square . | |||||
| |||||
| nickel & copper alloy | |||||
| range15 nb up to 1200 nb in sch 5s , 10s , 10, 20 , 40s , 40 , std , 60 , 80s , 80 , xs , 100 , 120 , 140 , 160 & xxs formseamless / erw / welded in round & square . | |||||
| |||||
| carbon & alloy steel | |||||
| range15 nb up to 1200 nb in sch 5s , 10s , 10, 20 , 40s , 40 , std , 60 , 80s , 80 , xs , 100 , 120 , 140 , 160 & xxs formseamless / erw / welded in round & square . | |||||
| |||||
| RANGE15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS FORM ::SEAMLESS & WELDED LONG RADIUS & SHORT RADIUS ELBOW 90 DEG , LONG RADIUS ELBOW 45 DEG , Long Radius & Short Radius Elbow 90 Deg , Long Radius Elbow 45 Deg , Long Radius & Short Radius Elbow 180 Deg ( Return Bend ) , Reducing Elbow , Equal Tee , Un Equal Tee, Crosses , Concentric Reducer , Eccentric Reducer , Long Stubend , Short Stubend , Coller , Pipe Cap , Long Radius Bends R =3 D , 5 D , 6 D , 8 D , 10 D & 20 D In 15 Deg , 30 Deg, 60 Deg & 90 Deg And Drawing Bassed Butt Weld Fitting ( Customised ) . | |||||||||||
| |||||||||||
| Nickel & Copper Alloy | |||||||||||
| |
| Carbon & Alloy Steel | |||
| |
| stainless & duplex steel | |||
| stainless steel |
| nickel & copper alloy |
| nickel alloy astm / asme sb 564uns 2200 ( nickel 200 ) , uns 4400 (monel 400 ) , , uns 8825 inconel (825) , uns 6600 (inconel 600 ) , uns 6601 ( inconel 601 ) , uns 6625 (inconel 625) , uns 10276 ( hastelloy c 276 ) astm / asme sb 160uns 2201 (nickel 201 ) astm / asme sb 472uns 8020 ( alloy 20 / 20 cb 3 ) copper alloy astm / asme sb 61 uns no. C 92200&astm / asme sb 62 uns no. C 83600.astm / asme sb 151 uns no.70600 , 71500 , c 70600 ( cu -ni- 90/10) , c 71500 ( cu -ni- 70/30) astm / asme sb 152 uns noc 10100 , c 10200 , c 10300 , c 10800 , c 12000, c 12200. |
| carbon & alloy steel | |||
| carbon steel alloy steel |
We also stock Bar, Hexagon, Square, Round products in various dimensions and grades.
We stock Stainless Steel, carbon and alloy specialty steels supplied in the as rolled, annealed and normalized conditions. We offer cut to size and heat treatment through our service center.
User Industries:Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal.
Product Range:The following table represents size range, product standards and material grades of Round Bars.
| Stainless & Duplex Steel |
| RANGE3.17 MM TO 350 MM DIA Stainless SteelASTM / ASME SA 276 TP304 , 304L , 309S , 309H, 310S , 316 , 316L , 316 TI , 317 , 321 , 347 , 410 , 420 , 430 , 431 , 440A , B & C. , 446 ASTM / ASME SA 479 TP304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 321 , 321H , 347 , 347 H , 410, 430 , 431 & 444. Duplex Steel ASTM / ASME SA 276UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760 |
| Nickel & Copper Alloy |
| RANGE3.17 MM TO 350 MM DIA Nickel Alloy ASTM / ASME SB 160UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 ) ASTM / ASME SB 164UNS 4400 (MONEL 400 ) ASTM / ASME SB 425UNS 8825 (INCONEL 825) ASTM / ASME SB 166UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 ) ASTM / ASME SB 446UNS 6625 (INCONEL 625) ASTM / ASME SB 574UNS 10276 ( HASTELLOY C 276 ) ASTM / ASME SB 472UNS 8020 ( ALLOY 20 / 20 CB 3 ) |
| Carbon & Alloy Steel |
| RANGE3.17 MM TO 350 MM DIACarbon Steel ASTM / ASME A105 Alloy Steel ASTM / ASME A 182 GR F5, F 9 , F 11 , F 12 , F 22 , F 91. ASTM / ASME A 729 GRB 11 & B 22. |
Material :-Stainless Steel
: AISI 202, 304, 304L, 316, 316L, 310, 410, 420 Etc.: 4.6 , 5.6, 6.6, 8.8, 10.9 & 12.9 / 'R', 'S', 'T' Conditions.
Alloy Steel :- Bare Condition, Galvanized, Phosphetised, Cadium Plated,
Carbon Steel :- Hot Deep Galvanized, Bloodied Etc.
Specification :- We provide Fsateners as per DIN, ANSI, AISI, ASTM, JIS, BS, GOST, IS, Etc. as well as consumers specific requirements. We are specialist in Manufacturing of Drawing Based Fasteners.
| Bolts | Nuts | Washers | Socket Screw |
| Hex Bolt | Hex Nut | Plain Washers | Cap Screw |
| Round Bolt | Thin Nut | Spring Washers | Button Screw |
| Square Bolt | Castle Nut | Tab Washers | Low Head Screw |
| Dom Bolt |
Dom Nut |
Wave Washers | Countersunk Screw |
| Carrige Bolt | Cap Nut | Tapper Washers | Grub Screw |
| U Bolt | Self Lock Nut | Star Washer | (Dog /Cup / Cone/Flat) |
| J Bolt | Flange Nut | Circlip | Allen Key |
| Slotted Bolt | Square Nut | E Clip | Plug (Bsp/Bspt/Npt) |
| Foundation Bolt | Weld Nut | Tapper / Cylandrical Pins | |
| Coupling Bolt | Wing Nut | Dowel Pin | |
| Disc Washer |
| Non Ferrous Metal |
| We are Manufacturer, Importers, Exporters, Stockist & Suppliers of Copper, Brass, Aluminium, Bronze, Gunmetal, Zinc, Lead etc. in form of Bar, Wire, PVC Coated Copper Coil, Coils, Round, Sheets, Plates, Channel, Angle, Pipes etc. for details please contact us. |
| Copper |
| Electrolytic Copper, Electrolytic Tough Pitch Copper, Deoxidised Copper, Aresenical Phosphoresced Copper, General Purpose Commercial Copper and High Conductivity Copper FORMS:Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes. |
| Brass |
| Free Cutting Brass, Leading Brass, Foreign Brass, Reviting Brass, Lead Free Brass, Hightensile Brass, Neval Brass, Gilding Brass, Red Brass, Low Brass, Catridge Brass, Yellow Brass, Basis Brass & Muntz Brass. FORMS:Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes. |
| Nikel Alloys |
| Hastelloy, 904, Titanium, Duplex Alloy 2205, Duplex Alloy 2205 Code, Duplex Alloy 2304, Duplex Alloy 2507, Inconel 718, Inconel 751, Inconel X750, Inconel 722, Inconel MA 954, Monel 400, Monel 401, Monel 404, Monel 502, Monel K500, Monel R405, Nickel 201, Nickel 205, Nickel 211, Nickel 220, Nickel 230, Nickel 233, Nickel 270 etc. |
| Alluminium |
| Aluminium, Aluminium Bronze, Aluminium Silicon Bronze, Manganeese Bronze, Phospherous Bronze, Gunmetal. FORMS:Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes. |
| We are the manufacturers of Stainless Steel Angles. |
| If you require stainless steel Angles, contact us and one of our representatives will be happy to help you order just what you need. We are also available to answer questions you may have about our Stainless Steel Angles or any of our other products. |
| Size | AV. Weight | |
| In mm | KG / MTR. | KG / FT |
| 20 x 20 x 3 | 0.90 | 0.27 |
| 25 x 25 x 3 | 1.10 | 0.34 |
| 25 x 25 x 5 | 1.80 | 0.55 |
| 25 x 25 x 6 | 2.10 | 0.64 |
| 30 x 30 x 3 | 1.40 | 0.43 |
| 30 x 30 x 4 | 1.08 | 0.54 |
| 30 x 30 x 5 | 2.2 | 0.87 |
| 30 x 30 x 6 | 2.5 | 0.77 |
| 35 x 35 x 3 | 1.60 | 0.49 |
| 35 x 35 x 4 | 2.10 | 0.64 |
| 35 x 35 x 5 | 2.60 | 0.79 |
| 38 x 38 x 3 | 1.70 | 0.52 |
| 40 x 40 x 4 | 2.40 | 0.73 |
| 40 x 40 x 5 | 3.00 | 0.91 |
| 40 x 40 x 6 | 3.50 | 1.07 |
| 50 x 50 x 3 | 2.3 | 0.69 |
| 50 x 50 x 4 | 3.00 | 0.91 |
| 50 x 50 x 5 | 3.80 | 1.16 |
| 50 x 50 x 6 | 4.50 | 1.37 |
| 65 x 65 x 5 | 4.90 | 1.49 |
| 65 x 65 x 6 | 5.80 | 1.77 |
| 65 x 65 x 8 | 7.70 | 2.35 |
| 65 x 65 x 10 | 9.40 | 2.86 |
| 75 x 75 x 5 | 5.70 | 1.74 |
| 75 x 75 x 6 | 6.80 | 2.07 |
| 75 x 75 x 8 | 8.90 | 2.71 |
| 75 x 75 x 10 | 11.00 | 3.35 |
| 90 x 90 x 6 | 8.20 | 2.71 |
| 90 x 90 x 8 | 10.80 | 3.29 |
| 100 x 100 x 6 | 9.20 | 2.80 |
| 100 x 100 x 8 | 12.10 | 3.69 |
| 100 x 100 x 10 | 14.90 | 4.54 |
| 100 x 100 x 12 | 17.70 | 5.40 |
| We are the manufacturers of Stainless Steel Channels. |
| If you require stainless steel Angles, contact us and one of our representatives will be happy to help you order just what you need. We are also available to answer questions you may have about our Stainless Steel Channels or any of our other products. |
| Size | AV. Weight | |
| In mm | KG / MTR. | KG / FT |
| 75 x 40 ST | 7.14 | 2.18 |
| 100 x 50 ST | 9.56 | 2.91 |
Pearls Metals (Pearls Metals)
Shree Rajendra Vihar Co-op. Hsg. Society Ltd.,
Office No. 1 & 2, Gr. Flr., 12th Khetwadi X Lane,
- 400 004., Mumbai, Maharashtra - 400004, India
Share us via
