Payal Engineering

Naroda, Ahmedabad, Gujarat

These valves are affected in carbon steel and brass material are supplied with instantly cranked/aluminium/ steel handles. These valves can work up to maximum standard pressure of 6000dpi or 413Bar. Lines operating under high pressure, typically around 300 bar, require high pressure ball valves for ON/OFF application. Our range of high pressure valves are highly durable and provide effective show without any leak.These valves are specially designed to withstand continuous use under these severe conditions.

High Pressure Ball Valveare of a compact construction. It can easily handle even high pressure and can work up to the pressure 500/1000bar. We conduct individual stress testing for each valve to make certain safety. The ball valve can be used for oil, water, gas, oxygen, chemical or any other special purpose as we can produce it as per the specified condition. Below are the listings of manufacturers and exporters of high pressure ball valves. You can view company details & contact them directly through email, refine your search by product keywords, browse trade leads posted by high pressure ball valves manufacturers and view several other products and trade shows related tohigh pressure ball valves.

Features :

• 2way & 3way 3PC High pressure Ball Valves, Full Port.
• End Connection: Thread End / Socket Weld / Butt Weld / Flanged End.
• High Pressure Ball Valve with a superior Shutoff
• Simple to Maintain
• High Pressure Ball Valve is easy to turn on
• All Seats are Preloaded
• Self-adjusting stem seals automatically
• High Pressure Ball Valve with a High surface Finish
• High Pressure Ball Valve Materials: SS304 /SS316/CS.
• Seat: Delrin, Peek , PTFE
• Working Pressure (CWP) :3000 /6000 PSI

With rich expertise, we are offering a wide range ofNeedle Valvesthat is generally used in flow metering applications, especially when a constant, calibrated, low flow rate must be maintained for some time, such as the idle fuel flow in a carburetor. Our needle valves are appreciated in the market for low operating torque and high tensile strength. Further, these are provided in proper packaging to the clients in order to prevent wear and tear during transportation.

Needle Valvesor Shut-Off Valves are designed to Isolate, Calibrate and Drain Process Lines by Line Mounting. We are a promising manufacturer of high performance oriented valves which are strong and defect free in structure. Each requirement is taken into consideration and well implemented. Offered at different measurement, our clients are left with immense options to choose from.

We offer technically advance needle valves, made as per the international quality and safety standards. These valves are usually used in flow metering applications, especially when a constant, calibrated, low flow rate need to be maintained for some time.

Salient Features

• Size :1/8 to 1
• End connection: NPT, BSPT, Socket weld, Butt weld, Tube fitting
• Working Pressure:6000psig
• Temperature Rating:PTFE 450F, (232C)/Grafoil 700 F(371C)
• Material: SS 316, SS 304.C.S, F11 , Hastelloy, Monel.
• Packing: PTFE, Grafoil
• Panel mounting on request.
• All Vales are 100% factory tested.

Our Company offer high qualityNon Return Valves. These Valve are specially designed and are available in varied range.Non Return Valves are formulated with unique sealing provision which efficiently transmit the force directly to the body without put pressure to the sealing elements. . We produce superior quality Non Return Valves at reasonable prices as per our clients requirements.Our Non Return Valves are ideal to control the flow of water / oil / steam / chemical etc.

Features:-

• Leakage proof
• Durable
• Anti-corrosive

Application :-

Material Hndling Equipments, Earth Moving Machineries, Power Generating Plants, Steel Manufacturing Plants, Mining Industries, Forklifts, Trucks / Trailers, Chemical Processing Machines etc

Check Valvesare specially designed & manufactured for flow control of fluids and gases in corrosive & hazardous environment.Check Valvesmust be fitted in accordance with the direction of flow arrow indicating correct fluid flow direction. These valves are used in Process control, instrumentation and flow control applications. Valves are accuracy machine with designer strength and maximum effectiveness to provide high quality and low cost alternative in fluid and gaseous control system of different applications, to assemble the correct standards of our clients upward demands.

FUNCTIONS:-

• The Sealing efficiency is a very critical aspect of Check Valves to safeguard pumping systems.
• Check valves are designed to sustain backpressure and water hammering in piping systems.

manufacturer of high class Pressuregauges saverobtainable. Designed in line with manufacturing typical saver used to protect pressure gauge next to the result of pressure when it exceed the highest pressure mark of the pressure gauge. We still bid modified design as per the specification of our client.

• Convection : 1/2 NPT/BSP Male X Female Reliable Over Pressure Protection, Simple Use
• Metal : SS304/SS316/CS other materials on request.
• Temperature : UP to 120 Degrees Celsius
• Testing : 100% Pressure / hydrostatically tested

Payal Engineeringmakes valve manifolds which are considered for connecting system impulse line & transmitters. These manifolds consist of two valve configuration which allows for easy isolation, calibration, block and bleed for gauges, pressure switches and static pressure transmitting instruments.

We are one of the leading manufacturers of Manifold valves which offer a Safe & Economical method of installation, to control and measure pressure of liquids and gaseous media. The offered Valve functionally installed to Control, Isolate, Calibrate, Measure, and Equalize Drain or differentiates the pressure of liquid and gasses. Our fabricatedmanifold Valvesare rugged in construction to withstand high pressures and temperatures. These manifold valves combine the functions of a tee, calibration valve, isolation valve and all tubing and fittings into a single compact unit thus reducing number of fittings and space required for installation.

Our expertise in making a spacious range of manifold valves as per the international quality standards. The range of manifold valves includes 2 ways, 3 ways, and 5 ways manifold valves. Made with stainless steel, carbon steel and duplex stainless steel materials, manifold valves are easy to install and maintain. We offer manifold valves in various dimensions and specifications. These valves find their application in various industries like chemical, petrochemical, oil etc., and can be customized as per the need of the bulk buyers.

Features of Manifold Valve

• Screwed bonnet design.
• Bonnet-back seated blow out proof.
• Spindle tip-Non rotating tip shut off type soft seated.
• Bonnet pusher silver plated for anti galling freezing for increased stem cycle life
• Dust cap protects stem threads from externals contamination.
• Leak tight seal with low operating torque.
• Stem threads cold rolled to achieve maximum strength and high accuracy.
• Packing below the stem threads, prevents stem lubrication washout & isolate threads from system fluids.
• S. Lock pin adjacent to the hexagon bonnet prevents any unscrewing of the head unit.

Needle Valve Indiais a manufacture a wide range ofButterfly Valves. which are automatically better, structurally sound, easy to operate and totally dependable. Our Company Supply the complete range of Butterfly Valves in different size and different Types depending upon on users partiality and order. Butterfly Valves are widely established among customers due to excellent performance and minimum preservation quality. Needle Valve india is Manufactured in equally flanged and flangeless construction. They are also available at manufacturing leading rates that always keep us one to watch in the competitive market and clients select us first.

Item Part Material Options

• Body: Cast Iron I .S 210 Grade FG200 /GG 25:
• Ductile cast iron GGG 40: Cast carbon steel
• ASTM A-216 Grade WCB: Cast Stainless steels CFB & CF8M
• Seat: Nitrile, EPDM, Virton, Silicone
• Shaft: AISI 410 / PTFE
• O-ring : Nitrile, EDPM, Viton, Silicone
• Taper pin: AISI 410 / 316
• Plug: Steel
• Bush: Polyacetal.
• Range: Handle Type Butterfly Valve
• Water Type Butterfly Valve
• Flange Type Butterfly Valve
• Gear Type Butterfly Valve

High pressure globe valves is the perfect solution for flow control in various developed and commercial application apex quality and reasonable price of the Globe Valve are adding to its order in the market.

Globe Valvesare one of the prime manufacturer, supply and export in India. Our Globe Valves are really user friendly. Key Features of our Globe Valves are bolted bonnet, rising stem , Manufactured using latest technology under expert supervision.Globe Valvesis the perfect solution for flow control in various developed and commercial application apex quality and reasonable price of the Globe Valve are adding to its order in the market.

Globe Valvesis tested on stringent parameters to make it fit for working under high pressure and temperature. Various industrial sectors are placing repeated orders for our Globe Valves as no alternative is available when it comes to quality and performance. Globe Valve manufactured by us are duly tested on various parameters and are in high efficiency.

Our Globe Valve Is Appreciated For :-

• Structurally sound
• Hydraulically engineered
• Accurate size