Write a Review
Our Products
Our product range contains a wide range of duty lathe machine, Lathe Machines, All Geared Lathe Machine, Capstan Lathe Machine and Extra Heavy Duty Lathe Machine
| MODEL | ADMIT BETWEEN CENTRES | LENGTH OF BED | Floor Space Occupied (m.m.) |
Approx.Weight in Kgs. | Approx. Case Dimensions (m.m.) |
|
| Nett. | Gross | |||||
| HGM-1 | 450 m.m. | 1370 m.m.(4′-6″) | 1650×970 | 775 | 825 | 2000x1000x1500 |
| HGM-2 | 725 m.m. | 1600 m.m.(5′-3″) | 1950×970 | 850 | 900 | 2200x1000x1500 |
| HGM-3 | 950 m.m. | 1830 m.m.(6′) | 2100×970 | 875 | 925 | 2500x1000x1500 |
HIPAT Capstan lathes are productive machines, suitable for turning, Drilling, Boring, Facing & Threading with full Norton Gear Box with Semi-Skilled operating pieces of jaw Chuck.
| HC-60GN | HC-50GN | HC-40GN | HC-40GN | HC-32G | HC-25G | HC-25S | HC-20S | |
| Spindle Hollow | 62 | 52 | 42 | 42 | 38 | 32 | 28 | 25 |
| Maximum collet capacity | 60 | 50 | 40 | 40 | 32 | 25 | 25 | 20 |
| Range of spindle speed | 90- 1000 | 100- 1050 | 100- 1050 | 165-1500 | 165-1500 | 275-900 | 650-1660 | 650-1660 |
| Effective Strokes of turret slide | 180 | 175 | 165 | 140 | 140 | 130 | 110 | 100 |
| Bore size in turret hex. Head | 32 | 32 | 32 | 32 | 25 | 25 | 25 | 25 |
| Center of holes above turret slide | 45 | 45 | 45 | 45 | 45 | 45 | 45 | 45 |
| Max. distance between spindle nose to turret face | 430 | 430 | 430 | 425 | 425 | 400 | 375 | 300 |
| Cross slide transverse travel | 150 | 150 | 150 | 95 | 95 | 95 | 95 | 95 |
| Cross slide longitudinal travel | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 300 |
| Length of bed | 1375 | 1375 | 1375 | 1225 | 1225 | 1275 | 1050 | 960 |
| Width of bed | 230 | 230 | 230 | 178 | 178 | 178 | 178 | 178 |
| Height of center above bed | 190 | 190 | 190 | 165 | 165 | 165 | 165 | 165 |
| Floor space required | 3m X 1m | 3m X 1m | 3m X 1m | 3m X 1m | 3m X 1m | 3m X 1m | 3m X 1m | 3m X 1m |
| Packing size (approx.) | 5 x 3 x 5 fts. | 5 x 3 x 5 fts. | 5 x 3 x 5 fts. | 5 x 3 x 5 fts. | 5 x 3 x 5 fts. | 4.5 x 3 x 5 fts. | 4 x 3 x 5 fts. | 4 x 3 x 5 fts. |
Hipat Brand Extra Heavy Duty Lathe Machine is a prime product from our parent company PATHAK INDUSTRIES KOL.This machine features superior close-grained grey cast iron casting, which is seasoned to time. This machine is available in two models namely.
| MODEL | HHL-12 | HHL-16 | HHL-20 | HHL-24 |
| Length of Bed | 12” | 16” | 20” | 24” |
| Width of Bed | 26” | 26” | 28” | 28” |
| Height of center | 24” | 24” | 25” | 26” |
| Swing over Bed dia. | 47” | 47” | 51” | 51” |
| Swing in Gap dia. | 72” | 72” | 76” | 76” |
| Width of gap intent of face plate | 14” | 14” | 15” | 16” |
| Swing over saddle dia. | 37” | 37” | 41” | 41” |
| Admin between centre | 70 * | 120* | 155* | 213* |
| Spindle hollow | 4 ¼ ” | 4 ¼ ” | 4 ¼ ” | 4 ¼ ” |
| No. of Spindle speed | 5 | 5 | 6 | 6 |
| Size of Morse taper | 5MT | 5MT | 5MT | 5MT |
| Lead screw pitch | 2PTI | 2PTI | 2PTI | 2PTI |
| Power required in H.P. | 7.5 | 10 | 15 | 20 |
| R.P.M. motor approx. | 960 | 960 | 960 | 960 |
| Approx. weight in Kgs. | 5000 | 6000 | 7200 | 8000 |
The spindle is driven, either by foot power from a treadle and flywheel or by a belt or gear drive to a power source. In most modern lathes this power source is an integral electric motor, often either in the headstock, to the left of the headstock, or beneath the headstock, concealed in the stand.
| Model | HAL-614/2 | HAL-816/2 | HAL-1018/2 | HAL-1220 | HAL-1422 |
| Length of bed | 61/2 Ft. | 81/2 Ft. | 101/2 Ft. | 12 Ft. | 14 Ft. |
| Width of bed | 375 MM | 375 MM | 450 MM | 500 MM | 550 MM |
| Height of Center | 300 MM | 300 MM | 400 MM | 450 MM | 550 MM |
| Swing Over Bed | 600 MM | 600 MM | 800 MM | 900 MM | 1000 MM |
| Swing Over Cross Slide | 325 MM | 325 MM | 530 MM | 600 MM | 630 MM |
| Swing In gap | 865 MM | 865 MM | 12000 MM | 1300 MM | 1400 MM |
| Admit Between Center | 100 MM | 1500 MM | 200 MM | 2500 MM | 3000 MM |
| NO’s of Spindle Speeds | 8 | 8 | 9 | 9 | 8 |
| RPM Range | 30-720 | 30-720 | 30-720 | 15-450 | 30-720 |
| Spindle Hollow | 65 MM | 65 MM | 90 MM | 103 MM | 103 MM |
| Metric Threads | 1-14 | 1-14 | 1-14 | 1-14 | 1-14 |
| With Worth Threads TPI | 2-30 | 2-30 | 2-30 | 2-30 | 2-30 |
| No of Feeds | 30 | 30 | 30 | 30 | 30 |
| Electic Motor RPM | 3*1440 | 3*1440 | 5*1440 | 5*1440 | 7.5*1440 |
A toolroom lathe is a lathe optimized for toolroom work. It is essentially just a top-of-the-line center lathe, with all of the best optional features that may be omitted from less expensive models, such as a collet closer, taper attachment, and others. There has also been an implication over the years of selective assembly and extra fitting, with every care taken in the building of a toolroom model to make it the smoothest-running, most-accurate version of the machine that can be built.
| MODEL | RANGE | A.B.C | WEIGHT (Approx) |
Floor L |
Space W |
Occupied | |
| HGT-5 | 5.5 FEET | 1675 MM | 550 MM | 1100 KG | 1980 (78″) | 1250 (49″) | 1370 (54″) |
| HGT-6 | 7 FEET | 2130 MM | 1000 MM | 1300 KG | 2425 (95″) | 1250 (49″) | 1370 (54″) |
| HGT-9 | 9 FEET | 2740 MM | 1560 MM | 1500 KG | 3050 (120″) | 1250 (49″) | 1370 (54″) |
| HGT-10 | 10 FEET | 3048 MM | 1860 MM | 1700 KG | 3350 (132″) | 1250 (49″) | 1370 (54″) |
| HGT-12 | 12 FEET | 3658 MM | 2450 MM | 1925 KG | 3950 (156″) | 1250 (49″) | 1370 (54″) |
Re miniature versions of a general-purpose center lathe (engine lathe). They typically have swings in the range of 3 to 7 (70 mm to 170 mm) diameter (in other words, 1.5 to 3.5 (30 mm to 80 mm) radius). They are small and affordable lathes for the home workshop or MRO shop. The same advantages and disadvantages apply to these machines as explained earlier regarding 3-in-1 machines.
basic type of lathe that may be considered the archetypical class of metalworking lathe most often used by the general machinist or machining hobbyist. The name bench lathe implies a version of this class small enough to be mounted on a workbench (but still full-featured, and larger than mini-lathes or micro-lathes). The construction of a center lathe is detailed above, but depending on the year of manufacture, size, price range or desired features, even these lathes can vary widely between models.
| Model | HML-4 | HML-6 | ||
| SPECIFICATION | 4’.1/2”(1370 MM) | 6’.00”(1825 MM) | ||
| INCH | MM | INCH | MM | |
| BED WIDTH | 11” | 279 | 11” | 279 |
| HEIGHT OF CENTRE OVER FLAT BED WAYS | 8” | 203” | 8” | 203” |
| MAXIMUM SWING OVER BED | 16” | 405” | 16” | 405” |
| MAXIMUM SWING OVER CROSS LIDE | 9” | 228” | 9” | 228” |
| MAXIMUM SWING IN GAP | 23” | 580” | 23” | 580” |
| ADMIT BETWEEN CENTRE | 25″ | 635″ | 34″ | 860” |
| SPINDLE NOSE | 6TPI | 6TPI | ||
| NUMBER OF SPINDLE SPEED | 6” | 6” | ||
| DIAMETER OF HOLE THROUGH SPINDLE | 21/16” | 52 | 21/16” | 52 |
| INCH RANGE THREADS | 4 TO 60 TPI | 4 TO 60 TPI | ||
| METRIC RANGE THREADS | 0.5 TO 7.5 MM | 0.5 TO 7.5 MM | ||
| LED SREW DIA & PITCH | 1.1/4” | 31.75 | 1.1/4” | 31.75 |
| FEAD SAFT DIA | 7/8″ | 22.22 | 7/8″ | 22.22 |
| TAIL STOCK SPINDLE TAPER BORE | Mt4 | Mt4 | ||
| TAIL STOCK SPINDLE TRAVEL | 5.1/2 | 140 | 5.1/2 | 140 |
| POWER REQUIRED | 2 HP 1440 RPM | 2 HP 1440 RPM | ||
| APPROX WEIGHT | 650 KG | 750 KG | ||
Heavy duty, precision quality, CENTRE LATHE M/C., fitted with 3-Speeds Semi-Norton gear boxes, head stock fitted with Tapper Roller Bearings, complete with all std. access., but without electrical, as per enclosed catalog. Machine having length of bed 4ft-6, width of bed 12, ht.of centre 10, Model : ST-4.
| Model | AMI-600 | AMI-1000 | AMI-1500 | AMI-2000 | AMI-2500 | AMI-3000 | AMI-4000 |
| Size of Machine | 600 mm | 1000 mm | 1500 mm | 2000 mm | 2500 mm | 3000 mm | 4000 mm |
| Diameter of job table | 500 | 900 | 1300 | 1800 | 2300 | 2800 | 3800 |
| Max. Diameter Admit | 800 | 1050 | 1600 | 2200 | 2750 | 3250 | 4250 |
| Max. Height under Cross Rail | 400 | 600 | 1200 | 1500 | 1700 | 1800 | 2000 |
Tarsem (Pathak Industries Kol)
117, GT Road, Salkia, Kolkata, West Bengal - 711106, India
Share us via
