Vadodara, Gujarat, India
Our Products
Wool
2 Products availableElectric Control Panels
2 Products availableInsulated Cable
2 Products availableTemperature Sensors
2 Products availableDC Motor
1 Products availableSwitch Gears
1 Products availableOur Complete range of products are Auto Tune Pid Universal Input Temperature Controller, Dual display, single output - UTC-221 and Dual display, single output- PID UTC-421P.
We are a distinguished Supplier of Auto Tune PID Universal Input Temperature Controller. We offer Auto Tune PID Universal Input Temperature Controller that is made using sound parts and components under the supervision of experts. Auto Tune PID Universal Input Temperature Controller that we supply is acknowledged for its easy installation and reliable performance. We offer Auto Tune PID Universal Input Temperature Controller at competitive prices.
Specifications
| Model | UTC - 121P | UTC - 111P | UTC-421P | UTC-411P |
|---|---|---|---|---|
| Dimensions(HXWXD) mm | 96X96X75 | 96X96X75 | 48X48X100 | 48X48X100 |
| Power Supply | 90-270V AC/DC, SMPS | |||
| Display | Upper: RED, 4-Digit, 0.56"Lower: GREEN, 4-Digit, 0.4" | RED, 4- Digit,0.56" | Upper: RED, 4-Digit, 0.4"Lower: GREEN, 4-Digit, 0.3" | RED, 4-Digit, 0.4" |
| Resolution | 1oC / 0.1 oC (For Range Less than 400 oC) | |||
| Indicating Accuracy | ± 1% of FSD | |||
| Key Setting | By Front Push Buttons | |||
| Input | Thermocouple | J (0 to 600 oC) / K (0 to 1200 oC) | ||
| RTD | PT-100 2W/3W (-99.9oC TO 400oC) Selectable | |||
| Control Output | Relay | 3 | ||
| SSR | 12V DC ±2V | |||
| BUZZER | 12V DC ±2V | |||
| Relay Action | HEAT MODE | |||
| Control Mode/Action | Auto Tune PID | |||
| Protection Structure/Housing | Plastic ABS Box with Front and Back | |||
| Panel Cut-Out (mm) | 92X92 | 92X92 | 45X45 | 45X45 |
| Mounting | Flush panel mounting with side clamps fixed behind the Panel | |||
| Indication | "OPEN" message on display for Sensor Break and LED for Relay Status Indication | |||
| Protection | Relay turns OFF in case of Sensor Break | |||
| Set Point | 1 Set Point | |||
| Installation | The RTD sensor should be connected to the instrument by proper gauge cables to minimize errors due to cable resistance. For thermocouple sensor, compensating cable of proper type must be used. | |||
