The Helium Charging test unit consists of SS Enclosure, fitted with high pressure Gas Booster, designed with a control panel including all measuring & control instruments likely gauges, valves, regulators etc. Industrial Helium Cylinders are used to charge high pressure cylinders using air driven gas booster. Decanting operation is done to vent out remaining helium gas from cylinder before hydro testing is done to an empty cylinder using the same Gas Booster.

Paskals Supply Custom Built General Purpose Hydraulic Rig for various performance test, loading test, cycling test, endurance test, cracking test, fatigue test etc with different Pressure, Flow & Temperature Parameters.

General Purpose Hydraulic Rig can be designed for any configuration & any level of automation & Control can be incorporated.

Probably this is the most common usage for the TestPAC. This heading covers both burst and proof testing of components.

There are a vast number of components that require pressure testing. These include such items as: Hose, Pipelines, Valves, Pressure Vessels, Gas Bottles, Boilers, Heat Exchangers, Accumulators, Fire Extinguishers, Turbines, Oil-Well Equipment, and many more. The mediums normally used in pressure testing are: water, water and soluble oil, or oil.

Paskals Design Custom Engineered Hose Test Equipment for the Automotive, Aerospace, Chemical, Industrial and Gas Industries.

Specifications include:

Hose Mandrel Extraction System Hose Proof Pressure Tester Hose Pulse Tester Hose Leak Tester Hose Burst Pressure Test System They can be supplied with features that include:

Data Acquisition Vibration Temperature Control & Environmental Chambers Flushing to Cleanliness Standards Automatic PLC Sequence Control Quick Clamping Mechanisms

Typical hoses being tested include:

Power Steering Air Conditioning Radiator Brake Aerospace Hose & Pipe work Industrial Hydraulic & Gas hoses.

Paskals are specialists in the design, manufacturing, test & commissioning of standard and customized systems in a wide range of industries & applications.

Our experience in high pressure gas pressurization and transfer has enabled us to develop our reputation for high pressure gas control technology.

Typical Special Fluids Systems which Paskals can offer are:

Oxygen Test Rig Oxygen Booster Systems Oxygen Plant CO2 Liquefied Gas Pumping System Argon Charging Unit Air Service Carts Helium Charging System Helium Decanting System Helium Purification Systems Halon transfer Unit Vapor Mixing Systems SF6 Recovery & Recharge Systems Refrigerant Gas Recovery Systems Refrigerant Charging Systems Coolant Charging Systems Nitrogen Generation Plants (PSATower) CFC Charge & Recovery System

Paskals are specialists in the design, manufacturing, test & commissioning of standard and customized systems in a wide range of industries & applications.

Our experience in high pressure gas pressurization and transfer has enabled us to develop our reputation for high pressure gas control technology.

Typical Special Fluids Systems which Paskals can offer are:

Oxygen Test RigOxygen Booster SystemsOxygen PlantCO2 Liquefied Gas Pumping SystemArgon Charging UnitAir Service CartsHelium Charging SystemHelium Decanting SystemHelium Purification SystemsHalon transfer UnitVapor Mixing SystemsSF6 Recovery & Recharge SystemsRefrigerant Gas Recovery SystemsRefrigerant Charging SystemsCoolant Charging SystemsNitrogen Generation Plants (PSATower)CFC Charge & Recovery System

Paskals manufactures a complete line of Custom Engineered gas control panels from basic gas selector panels, to gas selector control panels, to multiple gas mix panels.

Attractive Features:

Pressure Decay & Differential Pressure Technology for Leak detection of Gas.Single Point OperationLCD Display of OperationFully Automatic functionStep pressurization (3 Stages) to 300 bar.Precise Flow ControlNitrogen Recycling/ ReuseHigh Pressure StorageCalibrated Rate of filling of the Test VolumeIndependent programs for various Test Volumes (up to 5 Types)High Pressure Gas safety InterlockingInbuilt Air & Nitrogen FiltrationMost desired product for mass Production setup (OEMs)Printed test report & data entry of the test scheduleSystem will comply with poke yoke quality assurance.

State of the art technology (Hydraulic Driven) has allowed the engineers at Paskals to design and develop a range of Compact & Safe Systems for the compression of Non-reactive gases such as Nitrogen, Argon, and Helium

ATTRACTIVE FEATURES:

Easy to operate just Plug & Play type, suits to your need of Regulated High Pressure Gas @300 bar

Add Value to your CNG Vehicle Circuit servicing/maintenance needs by selecting Paskals CNG Service Master.

Paskals Product support, Training, spares just a phone call away.

OUR PRESSUREPAC ARE USED IN VARIOUS APPLICATIONS

CNG R&D Set ups in AUTOMOTIVE OEMs & LABS

CNG Circuit Leakage test *

CNG Circuit component prototype testing.

As intensifier to High Pressure gases.

R&D labs immediate High Pressure Requirements.

The purpose of gas conditioning units is to pre-treat natural gas and other combustible gasses prior to injecting them into a more critical process or a gas turbine generator. These units perform two functions:

1. Removal of all liquid droplets and solid contaminants from the gas, and, 2. Adjustment of the gas temperature to the injection requirements.

Different styles of filter elements can be used in the pressure vessels. The liquid contaminants are collected in a sump and automatically drained from the system for easy operations. Either electric or steam heaters can be used for temperature adjustments. All system components and piping are skid-mounted for transport and installation. The proper removal of moisture and solid particles from the gas prior to critical usages will greatly improve the operation of the rotating equipment.

CNG VIGILANT - Leak Tester for Automotive CNG Circuit & Components in convincing PASKALS quality.

Paskals & Haskel together have delivered innovative products for CNG Automotive Industry, worldwide.

Our Innovative CNG Vigilant is a must for every CNG vehicle manufacturer for end of line testing. It is a complete solution for your entire Leak testing needs and features like Temperature Compensation &Nitrogen Recycling makes it Best Leak Testers available in market. Paskals & Haskel together have products for all your needs. Be it component testing, R&D and Product development, testing at your service stations, we have proven products for all your needs. Our PressurePAC is developed to take care of the pressing requirement

in various departments for testing/maintenance / repair/R&D & Product development purpose. It is compact and portable enough to carry it anywhere. We have electric driven as well as Air Driven versions of the product.

Every company in the CNG Automotive Industry should have several of these units in their R&D Lab, Product Development department, Maintenance Department & Production Department. These are work horses designed for rugged life.

We have developed Testers for all components in our CNG circuit. Some of these are:

CNG Circuit Pressure Regulators Test EquipmentCNG Circuit Gauges Test EquipmentsCNG Circuit Valve Test EquipmentCNG Nozzle Test EquipmentCNG Cylinder Test equipmentCNG Cylinder Valve Test Equipment

We specialize in the manufacture of standard as well as custom built hydraulic power packs. Utmost care is taken to ensure that Quality Standards are maintained throughout the manufacturing process.

Our entire range of hydraulic power packs are painted with polyurethane paints, to avoid corrosion, effectively. This ensures Quality performance of our power packs under all climatic conditions, even in coastal areas, where the salt content is high in the atmosphere.

Our eye for even the minutes detail ensures that only standard accessories such as suction strainers, filler breathers, Pressure gauges, Gauge isolators and return line fillers, etc., are used during the manufacturing process. Only high Quality pumps and valves of world-renowned brands like ATOS,

REXROTH, VICKERS, etc., are used in these hydraulic power packs, always ensuring excellent performance. This commitment to maintaining Quality Standards ensures longevity and reliability of our systems.

With such adherence to Quality standards it is no doubt, our range of hydraulic power packs have already made a name for themselves in this highly competitive field.

We do manufacture standard and custom-built Hydraulic power packs. All our power packs are painted with polyurethane paints to avoid corrosion in an effective way. This gives us enough confidence to use our systems in seashore belts, where there will be lot of salt content in the atmosphere.

All our systems are compulsorily provided with all standard accessories such as suction strainers, Filler breathers, Pressure Gauges, Gauge Isolators & Return line filters etc, . We use only Branded and high quality accessories to increase the reliability of our systems. The pumps and valves used in our system are of High quality and of International Brands like ATOS, REXROTH, VICKERS etc. We also supply power packs with TPM & POKA YOKA standards to our customer needs.

Portable Oxygen Injection Systems Due to their legendary quality & reliability under the toughest worldwide conditions combined with excellent price quality ratio the compact line High pressure Low Flow & Low Pressure High Flow Oxygen Injection Packages (For Process Applications), from Paskals are first choice of Metallurgy, R&D, and Medical Professionals. MAJOR COMPONENTS* The Test Rig contains the following major Components:- Oxygen Valves Oxygen Pressure Reducing Regulators Oxygen Pressure gauges Oxygen Rota meter Flow Regulators Oxygen Reservoir Heat Chamber Fixtures and other miscellaneous items. STANDARD FOLLOWED * Oxygen is a fire hazard as it promotes Combustion. So we select standard product and Design procedure, are as like:- Cleanliness Level: For Oxygen Systems, we Use components (Cleaning & Packaging as per ASTM G93 Level (Swagelok Special Cleaning and Packaging-SC11). We propose to use Pressure Regulators with Built in relief Valves for further safety. Leak Proof: Swagelok components (Proposed) are leak tested and final assembly is also leak tested. We follow following standards in our design, Component selection and final assembly of the system: NFPA 53: Serious Oxygen System Fires ASTM G4/ASTM G 128: Fire Hazards in Oxygen Systems G88/ MNL36: Design Guidance for Oxygen Safety Systems *Please consult Factory for Further Details

A general term for injection processes that use special chemical solutions to improve oil recovery, remove formation damage, clean blocked perforations or formation layers, reduce or inhibitcorrosion, upgrade crude oil, or address crude oil flow-assurance issues. Injection can be administered continuously, in batches, in injection wells, or at times in production wells. Chemical Injection Skids are designed to complement our water treatment systems to provide critical reagents for standard operation conditions. Each skid could include multiple units to deliver reagents at different points in the treatment train.

Paskals designs and builds chemical injection skids and customizes system packages to meet individual specifications.

We offer Chemical Injection Packages, including the reservoir and controlled dosing rates appliances which are typically described as Integrated Dosing Packages. In this field, the added value to the customer is of a more detailed and integrated nature, where we combine our mechanical expertise with instrumentation, PLC unit control and flow control capabilities.

Generally packaged equipment is customized to a clients specific requirements and thus to meet customers Specifications. Fully independent from a pump manufacturer and skilled in all disciplines required for multi-disciplinary packages, we are able to advise the client, design and manufacture and also customize the specific packages to client requirements. Besides the pump(s) itself, the instrumentation like flow measurement, PLC control units etc. may form an integral part of the dosing packages included in the delivery program.

As a packager our expertise results in various design approaches to obtain the required flow regime as there are for example stroke adjustment, variable speed and multiple flow paths. Also the various design selection criteria are applied to come to an optimal and efficient design based on for instance multiple pump heads or the use of flow control valves, etc.

Also we are a technology solutions provider to the oil and gas industry. The packager creates value for its customers with innovative and professionally delivered solutions.

Gas Cabinet enclosures are designed to dispense gases in a controlled manner and to protect from exposure to dangerous materials. The gas distribution cabinet protects these sensitive devices from external mechanical, chemical and heat effects.
Gas cabinets are constructed to allow connecting proper forced ventilation to avoid accumulation of dangerous gases and vapors. Depending on the specific gas, additional design features are required in a gas cabinet (gas cylinder cabinet).

Some of the features are:

Excess Flow Sensor Gas Sensor Sprinkler Head Excess Pressure Sensing Automatic Operation with Automatic Purging

We are the main supplier of this product.

a pressure regulator is a valve that automatically cuts off the flow of a liquid or gas at a certain pressure. Regulators are used to allow high-pressure fluid supply lines or tanks to be reduced to safe andor usable pressures for various applications. All cng applications require the use of a regulator. Because pressures in cng tanks can fluctuate significantly, regulators must be present to deliver a steady flow pressure to downstream appliances

The Dispenser was designed using the latest technologies in the industry.

The simple and attractive design makes ample use of stainless steel, making the ERM-ERV dispenser a benchmark in its category.

The wide range of configurations makes it possible to choose the best product for the specific operating conditions.

The latest generation of electronics permits interfacing with the POS systems on the market today.

Each unit only leaves the factory after being tested under normal operating conditions.

Main Specifications 1, 2 or 3 pressure levels1, 2 or 4 refueling pointsTwin hose fitted with break awayRecovery of the servo assisted hose to reduce wear caused by rubbingHigh capacity mass meter precision +/- 0.5%Electro pneumatic valves with pre-filled actuator Pipes with larger diameter for superior performanceInlet filter on each lineExcess flow valvesIndependent electronic head for each refueling pointBacklit LCD displayMechanical totals meter End of refueling pressure gaugeITALIAN coupling

Options Available Dead man button -self service NGV1 / NGV2 coupling and others available on requestTemperature compensationPreset dispensing Dispensing control system (POS)

We Deign, Fabricate in House Customized Priority panels for Testing & Filling of CNG Vehicles.

Priority Panels are designed around our own extremely reliable and robust Priority Valve. All components used in our panels are manufactured from high quality stainless steel SS316 (Swagelok) ensuring maximum corrosion resistance and a long service life. Before dispatch all Priority Panels are tested on natural gas at our in-house CNG station. This ensures that on arrival your priority panel is ready to use and no additional on-site adjustments are required.

The clear benefits gained when you install a Priority Panel are: Ultra High Flow Rates The panels are designed for compressor flow rates in excess of 3, 000 m/hr

No Reverse Flow The check valves on each line prevent reverse flow through the priority panel

Large Flow Range The KG80 meter is accurate over the range 1-80kg/min and has been approved to the latest OIML standard: Compressed Gaseous Fuel Measuring Systems for Vehicles. Easy Maintenance The station can be kept running while the manual isolation valves are shut for maintenance work. Pipework does not need to be removed for servicing the panels Simple Operation The Priority Valves only open once the inlet pressure reaches 230 bar. Gas is then allowed to flow to the common outlets on the bottom and right hand side of the valve. When all banks reach 230 bar, they fill up together until the compressor shuts off.

We offer a range of Priority Panels with options designed to suit your specifications: One, Two, and Three Bank Priority Panels Optional Compressor Top-UpOptional Solenoid Shut-off ValvesOptional Pressure Relief ValvesDaughter Station Priority PanelOther options are available on request Solenoid Shut-off Option

With the addition of Solenoid Valves each of the forecourt lines can be shut-off. The solenoids come pre-wired into a flameproof box and when the power supply is removed the solenoids close instantly.

This additional safety feature provides increased control of the gas flow through your priority panel.

CNG Regulator Testers - Product Testing

This unit is developed to check the Continuous Operation of CNG Regulator by conducting cycling test of 50, 000 cycle

CNG COMPRESSION PACKAGES

Assembled on skids, our compression packages are equipped with efficientSafety systems used to control output, cooling and automated Management stages.

Characteristics common to all products are:

High performanceMinimum compression costs available on the marketReduced starting currentsLack of vibrationNON-lubricated cylindersLow oil consumptionCompletely automatic operationTropicalised gas water air coolingMinimum maintenance costsDesigned for a wide range of suction pressureDesigned for a wide range of discharge pressurePerfectly balancedLow noiseInterchangeable piston-sleeve moduleSuitable for any kind of application: CNG, Biogas and Process gasEngineered for non-stop operation, 365 days a yearAutomatic inlet/outlet gas closure systemRemotely managedSends alarm signs through SMS/e-mail

Various options and configurations such as:

Oil FreeAPI 618 compliantElectricity panel in Explosion Proof versionStart up with inverter and consumption managed by computerComputerized system to control flowSoft-Start start upOperates with endothermic engineTropicalised gas air coolingPipes protected from high temperature

Make it possible to use the compressors in any operating context and also make them suited to different requirements.

The Helium Charging test unit consists of SS Enclosure, fitted with high pressure Gas Booster, designed with a control panel including all measuring & control instruments likely gauges, valves, regulators etc. Industrial Helium Cylinders are used to charge high pressure cylinders using air driven gas booster. Decanting operation is done to vent out remaining helium gas from cylinder before hydro testing is done to an empty cylinder using the same Gas Booster.

Paskals can supply fully automatic software controlled Fuel Injection Pump Test Rigs for performance & operational testing of pump at variable Pressure, Flow, Temperature& RPM ratings. The Test Rig comprises of Hydraulic Power Pack, Cooling Circuit, Lubrication Circuit and Gear Box with all measuring Instrumentation namely Pressure Transmitters, Flow meters, RTDs etc with control & other safety features. Testing can be done at 120C using ATF.

Paskals offers an extensive line of systems for testing Linear, Servo and EHV, Pump and Motor, and Hydraulic Power Units providing our customers with the ability to test a wide range of hydraulic components on an aircraft. Paskals is host to an extensive test library covering a wide range of LRUs for manual, semi-automatic and automatic testing for both commercial and military applications.

Gas pressure regulating & metering skids are being supplied with gas filters, Isolation Valve, Meters, Safety Shut-off Valve & Regulating Valve. Ideal for individual industrial units and as a stand alone unit. Compact, efficient and easy to maintain. Natural Gas Metering Skids

Complete natural gas pressure regulating & metering skids are being supplied with gas filters, Isolation Valve, Meters, Safety Shut-off Valve & Regulating Valve. Ideal for individual industrial units and as a stand alone unit. Compact, efficient and easy to maintain.

Paskals Supply Custom Built General Purpose Hydraulic Rig for various performance test, loading test, cycling test, endurance test, cracking test, fatigue test etc with different Pressure, Flow & Temperature Parameters.

General Purpose Hydraulic Rig can be designed for any configuration & any level of automation & Control can be incorporated.

Probably this is the most common usage for the TestPAC. This heading covers both burst and proof testing of components.

There are a vast number of components that require pressure testing. These include such items as: Hose, Pipelines, Valves, Pressure Vessels, Gas Bottles, Boilers, Heat Exchangers, Accumulators, Fire Extinguishers, Turbines, Oil-Well Equipment, and many more. The mediums normally used in pressure testing are: water, water and soluble oil, or oil.

Paskals Design Custom Engineered Hose Test Equipment for the Automotive, Aerospace, Chemical, Industrial and Gas Industries.

Specifications include:

Hose Mandrel Extraction System Hose Proof Pressure Tester Hose Pulse Tester Hose Leak Tester Hose Burst Pressure Test System They can be supplied with features that include:

Data Acquisition Vibration Temperature Control & Environmental Chambers Flushing to Cleanliness Standards Automatic PLC Sequence Control Quick Clamping Mechanisms

Typical hoses being tested include:

Power Steering Air Conditioning Radiator Brake Aerospace Hose & Pipe work Industrial Hydraulic & Gas hoses.

Paskals are specialists in the design, manufacturing, test & commissioning of standard and customized systems in a wide range of industries & applications.

Our experience in high pressure gas pressurization and transfer has enabled us to develop our reputation for high pressure gas control technology.

Typical Special Fluids Systems which Paskals can offer are:

Oxygen Test Rig Oxygen Booster Systems Oxygen Plant CO2 Liquefied Gas Pumping System Argon Charging Unit Air Service Carts Helium Charging System Helium Decanting System Helium Purification Systems Halon transfer Unit Vapor Mixing Systems SF6 Recovery & Recharge Systems Refrigerant Gas Recovery Systems Refrigerant Charging Systems Coolant Charging Systems Nitrogen Generation Plants (PSATower) CFC Charge & Recovery System

Paskals are specialists in the design, manufacturing, test & commissioning of standard and customized systems in a wide range of industries & applications.

Our experience in high pressure gas pressurization and transfer has enabled us to develop our reputation for high pressure gas control technology.

Typical Special Fluids Systems which Paskals can offer are:

Oxygen Test RigOxygen Booster SystemsOxygen PlantCO2 Liquefied Gas Pumping SystemArgon Charging UnitAir Service CartsHelium Charging SystemHelium Decanting SystemHelium Purification SystemsHalon transfer UnitVapor Mixing SystemsSF6 Recovery & Recharge SystemsRefrigerant Gas Recovery SystemsRefrigerant Charging SystemsCoolant Charging SystemsNitrogen Generation Plants (PSATower)CFC Charge & Recovery System

Paskals manufactures a complete line of Custom Engineered gas control panels from basic gas selector panels, to gas selector control panels, to multiple gas mix panels.

Attractive Features:

Pressure Decay & Differential Pressure Technology for Leak detection of Gas.Single Point OperationLCD Display of OperationFully Automatic functionStep pressurization (3 Stages) to 300 bar.Precise Flow ControlNitrogen Recycling/ ReuseHigh Pressure StorageCalibrated Rate of filling of the Test VolumeIndependent programs for various Test Volumes (up to 5 Types)High Pressure Gas safety InterlockingInbuilt Air & Nitrogen FiltrationMost desired product for mass Production setup (OEMs)Printed test report & data entry of the test scheduleSystem will comply with poke yoke quality assurance.

State of the art technology (Hydraulic Driven) has allowed the engineers at Paskals to design and develop a range of Compact & Safe Systems for the compression of Non-reactive gases such as Nitrogen, Argon, and Helium

ATTRACTIVE FEATURES:

Easy to operate just Plug & Play type, suits to your need of Regulated High Pressure Gas @300 bar

Add Value to your CNG Vehicle Circuit servicing/maintenance needs by selecting Paskals CNG Service Master.

Paskals Product support, Training, spares just a phone call away.

OUR PRESSUREPAC ARE USED IN VARIOUS APPLICATIONS

CNG R&D Set ups in AUTOMOTIVE OEMs & LABS

CNG Circuit Leakage test *

CNG Circuit component prototype testing.

As intensifier to High Pressure gases.

R&D labs immediate High Pressure Requirements.

The purpose of gas conditioning units is to pre-treat natural gas and other combustible gasses prior to injecting them into a more critical process or a gas turbine generator. These units perform two functions:

1. Removal of all liquid droplets and solid contaminants from the gas, and, 2. Adjustment of the gas temperature to the injection requirements.

Different styles of filter elements can be used in the pressure vessels. The liquid contaminants are collected in a sump and automatically drained from the system for easy operations. Either electric or steam heaters can be used for temperature adjustments. All system components and piping are skid-mounted for transport and installation. The proper removal of moisture and solid particles from the gas prior to critical usages will greatly improve the operation of the rotating equipment.

Technology

The compressed air is passed through a Twin Tower PSA module interconnected with automatic changeover valves. At the bottom of PSA towers, Activated Alumina is provided which has tendency of adsorbing moisture from compressed air. After passing through this bed of Activated Alumina air gets dried. Supply of dry compressed air from this layer of desiccant (activated alumina) will be continuous without any interruption. Dried compressed air will now come in contact with bed of carbon molecular sieves (CMS). Carbon Molecular Sieves are special grade of adsorbant which have the property of preferential adsorption of oxygen molecules. At a time one tower remains under nitrogen production cycle, whereas the other tower undergoes regeneration which is achieved through depressurization of the tower to atmospheric pressure.

The two towers of PSA modules are inter-connected with automatic changeover valves through pneumatic signal given by solenoid valve which in turn get the electrical signal from the timer provided in the control panel. The changeover time cycle will be 1 + 1 minute. The outgoing nitrogen gas is sent to a surge vessel where the minimum nitrogen pressure will be maintained with the help of Back pressure Regulator. The product nitrogen will now be sent to the consumer point through a pressure reducing valves at required pressure.

Salient Features:

1. The PSA type gas generator is fully automatic and the gas of proper specification is made available within short period after start-up.2. This type of gas generator does not require any fuel.3. Since the feed stock for this gas generator is air, there is no problem like soot formation or presence of Co2 etc. the common problem in fuel combustion based gas generator.4. The gas generator is very compact requiring very small floor area.5. Depending on the pressure in the nitrogen storage tank, the gas generator keeps running with ON/OFF operation like compressed air installation.

Therefore, the gas generator would work only to the extent of meeting your gas requirement as and when needed.

Pipeline metering applications require specialized skills to ensure the safe transportation and accurate measurement of petroleum products. Custom fabricated metering skids from Paskals are an ideal way to meet these objectives.

Paskals metering skids are fabricated and assembled at Paskals facility. All welding is performed by certified welders and then tested per customer requirements. To further ensure weld integrity, all piping is also subjected to hydrostatic testing. The finished skids are delivered to the jobsite completely assembled, painted, and tested, resulting in considerable time and cost savings versus field fabrication.

CNG VIGILANT - Leak Tester for Automotive CNG Circuit & Components in convincing PASKALS quality.

Paskals & Haskel together have delivered innovative products for CNG Automotive Industry, worldwide.

Our Innovative CNG Vigilant is a must for every CNG vehicle manufacturer for end of line testing. It is a complete solution for your entire Leak testing needs and features like Temperature Compensation &Nitrogen Recycling makes it Best Leak Testers available in market. Paskals & Haskel together have products for all your needs. Be it component testing, R&D and Product development, testing at your service stations, we have proven products for all your needs. Our PressurePAC is developed to take care of the pressing requirement

in various departments for testing/maintenance / repair/R&D & Product development purpose. It is compact and portable enough to carry it anywhere. We have electric driven as well as Air Driven versions of the product.

Every company in the CNG Automotive Industry should have several of these units in their R&D Lab, Product Development department, Maintenance Department & Production Department. These are work horses designed for rugged life.

We have developed Testers for all components in our CNG circuit. Some of these are:

CNG Circuit Pressure Regulators Test EquipmentCNG Circuit Gauges Test EquipmentsCNG Circuit Valve Test EquipmentCNG Nozzle Test EquipmentCNG Cylinder Test equipmentCNG Cylinder Valve Test Equipment

PSA (Pressure Swing Adsorption) Technology a revolution in Non Cryogenic Air Separation and Oxygen Generation Technology uses special grade of ZMS (Zeolite Molecular Sieve).

The compressed air is passed through a Twin Tower PSA module interconnected with automatic changeover valves. After passing through a Refrigerated Dryer air gets dried. Dried compressed air will now come in contact with bed of Zeolite molecular sieves (ZMS). Zeolite Molecular Sieves are special grade of adsorbant which have the property of preferential adsorption of nitrogen molecules. At a time one tower remains under nitrogen production cycle, whereas the other tower undergoes regeneration which is achieved through depressurization of the tower to atmospheric pressure. The outgoing oxygen gas is sent to a surge vessel where the minimum pressure will be maintained with the help of Back pressure Regulator.

ATTRACTIVE FEATURES 1. Fully Automatic Operation requiring no special attention- Manless Operation 2. Generates Oxygen as and when required Plug It, Switch On & Forget 3. Easy to install and maintain Skid Mounted & precommissioned 4. Purity of Oxygen upto 93-95% can be achieved 5. PSA (Twin Tower Pressure Swing Adsorption) Based upto 150 NM3/hr 6. VPSA (Three Tower)For 150 Nm3/hr to 1500 Nm3/hr 7. VSA (Three Tower) For capacities more than 1500 Nm3/hr

We specialize in the manufacture of standard as well as custom built hydraulic power packs. Utmost care is taken to ensure that Quality Standards are maintained throughout the manufacturing process.

Our entire range of hydraulic power packs are painted with polyurethane paints, to avoid corrosion, effectively. This ensures Quality performance of our power packs under all climatic conditions, even in coastal areas, where the salt content is high in the atmosphere.

Our eye for even the minutes detail ensures that only standard accessories such as suction strainers, filler breathers, Pressure gauges, Gauge isolators and return line fillers, etc., are used during the manufacturing process. Only high Quality pumps and valves of world-renowned brands like ATOS,

REXROTH, VICKERS, etc., are used in these hydraulic power packs, always ensuring excellent performance. This commitment to maintaining Quality Standards ensures longevity and reliability of our systems.

With such adherence to Quality standards it is no doubt, our range of hydraulic power packs have already made a name for themselves in this highly competitive field.

We do manufacture standard and custom-built Hydraulic power packs. All our power packs are painted with polyurethane paints to avoid corrosion in an effective way. This gives us enough confidence to use our systems in seashore belts, where there will be lot of salt content in the atmosphere.

All our systems are compulsorily provided with all standard accessories such as suction strainers, Filler breathers, Pressure Gauges, Gauge Isolators & Return line filters etc, . We use only Branded and high quality accessories to increase the reliability of our systems. The pumps and valves used in our system are of High quality and of International Brands like ATOS, REXROTH, VICKERS etc. We also supply power packs with TPM & POKA YOKA standards to our customer needs.

Portable Oxygen Injection Systems Due to their legendary quality & reliability under the toughest worldwide conditions combined with excellent price quality ratio the compact line High pressure Low Flow & Low Pressure High Flow Oxygen Injection Packages (For Process Applications), from Paskals are first choice of Metallurgy, R&D, and Medical Professionals. MAJOR COMPONENTS* The Test Rig contains the following major Components:- Oxygen Valves Oxygen Pressure Reducing Regulators Oxygen Pressure gauges Oxygen Rota meter Flow Regulators Oxygen Reservoir Heat Chamber Fixtures and other miscellaneous items. STANDARD FOLLOWED * Oxygen is a fire hazard as it promotes Combustion. So we select standard product and Design procedure, are as like:- Cleanliness Level: For Oxygen Systems, we Use components (Cleaning & Packaging as per ASTM G93 Level (Swagelok Special Cleaning and Packaging-SC11). We propose to use Pressure Regulators with Built in relief Valves for further safety. Leak Proof: Swagelok components (Proposed) are leak tested and final assembly is also leak tested. We follow following standards in our design, Component selection and final assembly of the system: NFPA 53: Serious Oxygen System Fires ASTM G4/ASTM G 128: Fire Hazards in Oxygen Systems G88/ MNL36: Design Guidance for Oxygen Safety Systems *Please consult Factory for Further Details

A general term for injection processes that use special chemical solutions to improve oil recovery, remove formation damage, clean blocked perforations or formation layers, reduce or inhibitcorrosion, upgrade crude oil, or address crude oil flow-assurance issues. Injection can be administered continuously, in batches, in injection wells, or at times in production wells. Chemical Injection Skids are designed to complement our water treatment systems to provide critical reagents for standard operation conditions. Each skid could include multiple units to deliver reagents at different points in the treatment train.

Paskals designs and builds chemical injection skids and customizes system packages to meet individual specifications.

We offer Chemical Injection Packages, including the reservoir and controlled dosing rates appliances which are typically described as Integrated Dosing Packages. In this field, the added value to the customer is of a more detailed and integrated nature, where we combine our mechanical expertise with instrumentation, PLC unit control and flow control capabilities.

Generally packaged equipment is customized to a clients specific requirements and thus to meet customers Specifications. Fully independent from a pump manufacturer and skilled in all disciplines required for multi-disciplinary packages, we are able to advise the client, design and manufacture and also customize the specific packages to client requirements. Besides the pump(s) itself, the instrumentation like flow measurement, PLC control units etc. may form an integral part of the dosing packages included in the delivery program.

As a packager our expertise results in various design approaches to obtain the required flow regime as there are for example stroke adjustment, variable speed and multiple flow paths. Also the various design selection criteria are applied to come to an optimal and efficient design based on for instance multiple pump heads or the use of flow control valves, etc.

Also we are a technology solutions provider to the oil and gas industry. The packager creates value for its customers with innovative and professionally delivered solutions.

Paskals designs, manufactures and delivers Safety (relief) valve test benches for set pressure measurement on all types of spring or pilot operated safety (relief) valves. General specification: Range -10 or -16. (Larger stations available on request). Low or high volume full lift testing. Stationary, skid mounted portable or containerized systems. Safety screen. Safety interlocks. API 527 test facility. Liquid test system with J-tube design. Test medium: Compressed air, Nitrogen or Liquid. Features: Windows operated Computer Registration System. Full automatic set pressure and leakage testing. Pneumatic or electric driven high pressure compressor and storage system. Set pressure detection system by lift and acoustic measuring. Adapters for male and female thread connections. Partly for fully closed safety closure. Separate of combined test facility for pressure vacuum (breather) valves.

Paskals designs, manufactures and delivers valve test units for pressure testing any type of Gate, Globe, Plug, Ball, Check, Safety and Butterfly valve according to all international test standards. Capabilities: Range DN10 2200 mm. / - 86. Horizontal (stem vertical), vertical. (Stem horizontal) or tilting clamping system Clamping on the inlet flange, either flanges or (proportional clamping) between the clamping tables. 1 2000 tons of clamping force. With no or limited linear force on the valve body. Test pressure range: from vacuum up to 2000 bar / 30, 000 PSI. Test medium: Liquid, compressed air, Nitrogen, Helium or Hydrogen.

TEST BENCH FOR CONTROL VALVE

Paskals designs, manufactures and delivers valve test units for pressure testing any type of Gate, Globe, Plug, Ball, Check and Butterfly valve according to all international test standards.

Capabilities:

Range DN10 2200 mm. / - 86 Horizontal (stem vertical), vertical (stem horizontal) or tilting clamping system. Clamping on the inlet flange, either flanges or (proportional clamping) between the clamping tables. 1 2000 tons of clamping force. With no or limited linear force on the valve body. Test pressure range: from vacuum up to 2000 bar / 30, 000 PSI. Test medium: Liquid, compressed air, Nitrogen, Helium or Hydrogen.

Gas Cabinet enclosures are designed to dispense gases in a controlled manner and to protect from exposure to dangerous materials. The gas distribution cabinet protects these sensitive devices from external mechanical, chemical and heat effects.
Gas cabinets are constructed to allow connecting proper forced ventilation to avoid accumulation of dangerous gases and vapors. Depending on the specific gas, additional design features are required in a gas cabinet (gas cylinder cabinet).

Some of the features are:

Excess Flow Sensor Gas Sensor Sprinkler Head Excess Pressure Sensing Automatic Operation with Automatic Purging

Paskals TestPAC is designed to provide on-site High Pressure testing, Hydrostatic Testing, Proof Pressure Testing, Burst Testing. These units are self-contained and powered by compressed Air.

These units can generate Liquid Pressure up to 4000 bar * and for gases we have PressurePAC which can generate gas pressure up to 2000 bar*.

ADVANTAGES

Ability to stall at any pre determined pressure and holds this fixed pressure without consuming power or generating heat

-No heat, flame or risk of spark

-Infinitely variable cycling speed (flow rate)

-No limit or adverse effect to continuous stop/start applications

-Pump seals are self-lubricated requiring no external airline lubricator

-Reliable, easy to maintain, compact and robust

-Stainless Steel frame standard

-Portable configuration

We are the main supplier of this product.

Paskals are specialists in the design, manufacturing, test & commissioning of standard and customized systems in a wide range of industries & applications.

Our experience in high pressure gas pressurization and transfer has enabled us to develop our reputation for high pressure gas control technology.

Typical Special Fluids Systems which Paskals can offer are:

Oxygen Test Rig

Oxygen Booster Systems

Oxygen Plant

CO2 Liquefied Gas Pumping System

Argon Charging Unit

Air Service Carts

Helium Charging System

Helium Decanting System

Helium Purification Systems

Halon transfer Unit

Vapor Mixing Systems

SF6 Recovery & Recharge Systems

Refrigerant Gas Recovery Systems

Refrigerant Charging Systems

Coolant Charging Systems

Nitrogen Generation Plants (PSATower)

CFC Charge & Recovery System

a pressure regulator is a valve that automatically cuts off the flow of a liquid or gas at a certain pressure. Regulators are used to allow high-pressure fluid supply lines or tanks to be reduced to safe andor usable pressures for various applications. All cng applications require the use of a regulator. Because pressures in cng tanks can fluctuate significantly, regulators must be present to deliver a steady flow pressure to downstream appliances

The Dispenser was designed using the latest technologies in the industry.

The simple and attractive design makes ample use of stainless steel, making the ERM-ERV dispenser a benchmark in its category.

The wide range of configurations makes it possible to choose the best product for the specific operating conditions.

The latest generation of electronics permits interfacing with the POS systems on the market today.

Each unit only leaves the factory after being tested under normal operating conditions.

Main Specifications 1, 2 or 3 pressure levels1, 2 or 4 refueling pointsTwin hose fitted with break awayRecovery of the servo assisted hose to reduce wear caused by rubbingHigh capacity mass meter precision +/- 0.5%Electro pneumatic valves with pre-filled actuator Pipes with larger diameter for superior performanceInlet filter on each lineExcess flow valvesIndependent electronic head for each refueling pointBacklit LCD displayMechanical totals meter End of refueling pressure gaugeITALIAN coupling

Options Available Dead man button -self service NGV1 / NGV2 coupling and others available on requestTemperature compensationPreset dispensing Dispensing control system (POS)

We Deign, Fabricate in House Customized Priority panels for Testing & Filling of CNG Vehicles.

Priority Panels are designed around our own extremely reliable and robust Priority Valve. All components used in our panels are manufactured from high quality stainless steel SS316 (Swagelok) ensuring maximum corrosion resistance and a long service life. Before dispatch all Priority Panels are tested on natural gas at our in-house CNG station. This ensures that on arrival your priority panel is ready to use and no additional on-site adjustments are required.

The clear benefits gained when you install a Priority Panel are: Ultra High Flow Rates The panels are designed for compressor flow rates in excess of 3, 000 m/hr

No Reverse Flow The check valves on each line prevent reverse flow through the priority panel

Large Flow Range The KG80 meter is accurate over the range 1-80kg/min and has been approved to the latest OIML standard: Compressed Gaseous Fuel Measuring Systems for Vehicles. Easy Maintenance The station can be kept running while the manual isolation valves are shut for maintenance work. Pipework does not need to be removed for servicing the panels Simple Operation The Priority Valves only open once the inlet pressure reaches 230 bar. Gas is then allowed to flow to the common outlets on the bottom and right hand side of the valve. When all banks reach 230 bar, they fill up together until the compressor shuts off.

We offer a range of Priority Panels with options designed to suit your specifications: One, Two, and Three Bank Priority Panels Optional Compressor Top-UpOptional Solenoid Shut-off ValvesOptional Pressure Relief ValvesDaughter Station Priority PanelOther options are available on request Solenoid Shut-off Option

With the addition of Solenoid Valves each of the forecourt lines can be shut-off. The solenoids come pre-wired into a flameproof box and when the power supply is removed the solenoids close instantly.

This additional safety feature provides increased control of the gas flow through your priority panel.

CNG Regulator Testers - Product Testing

This unit is developed to check the Continuous Operation of CNG Regulator by conducting cycling test of 50, 000 cycle

CNG COMPRESSION PACKAGES

Assembled on skids, our compression packages are equipped with efficientSafety systems used to control output, cooling and automated Management stages.

Characteristics common to all products are:

High performanceMinimum compression costs available on the marketReduced starting currentsLack of vibrationNON-lubricated cylindersLow oil consumptionCompletely automatic operationTropicalised gas water air coolingMinimum maintenance costsDesigned for a wide range of suction pressureDesigned for a wide range of discharge pressurePerfectly balancedLow noiseInterchangeable piston-sleeve moduleSuitable for any kind of application: CNG, Biogas and Process gasEngineered for non-stop operation, 365 days a yearAutomatic inlet/outlet gas closure systemRemotely managedSends alarm signs through SMS/e-mail

Various options and configurations such as:

Oil FreeAPI 618 compliantElectricity panel in Explosion Proof versionStart up with inverter and consumption managed by computerComputerized system to control flowSoft-Start start upOperates with endothermic engineTropicalised gas air coolingPipes protected from high temperature

Make it possible to use the compressors in any operating context and also make them suited to different requirements.