PASHUPATI RUBTECH PVT LTD Ahmedabad, Gujarat

our organizationdealsin offering conveyor idler to our clients at reasonable rates.

features:

• light weight
• robust
• accurate dimensions

specifications:

• category: idler
• dimension: standard and customized
• moq: 1

application:

• • system component for conveyor structure used for moving bulk materials
  • modify your troughing angle to maximum material transport based on belt speed and material characteristics

.

Where return idler sets comprise two rolls, a support frame is required which supports the idler pair and attaches the idlers to the conveyor frame. This 2-roll design forms the return belt into a v trough and these return idler sets are referred to a V return idlers. The trough angle of the V return idler is usually 10 degrees and this feature has been developed to assist with belt training along the return strand.

Garland idler set comprises either 3-roll or 5-roll idlers joined together at the ends of their respective shafts by special lugs, to form a continuous chain of idlers

Pu Conveyor Roller

We are manufacturer Of Polyurethane / PU Conveyor rollers for Industrial Conveyor Application.Also, we provide PU Coating on metal pipes / rolls.Pu Rollers Sizes Available From Dia 25 MM to Dia 100 MM& Length From 30 MM to 1200 MM

Std Sizes :- PU OD 58 X 400/500/1000 MML, PU OD 60 X 300/400/500/600/700/800/900/1000 MML, PU OD 70 X 400/500/600/800/1000 MML

Caring Idlers ensures achievement of operational success of belt conveyor in a way. The shell is made from M.S. ERW black steel tube, pressed steel housing made from CRCA sheet, shaft of bright steel bar, sealing system consisting of (back seal, double labyrinth, molded dust cover, a rain cap), single piece fabricated steel idler frame and rollers fitted with size resistant ball bearings that conforms to IS:8598

Range comprises of Troughing (3/5 rolls) for carrying, Return (1 roll) for return side, Troughing Impact Idlers (rubber lined), Flat Impact, & Return Self Aligning

Minimum Information Reqd. While Sending Enquiry / Order :

1. Belt width
2. Degree of picking Idlers
3. Angle size
4. Idler pipe size (OD)
5. Overall O.D. in case rubber lined idlers is reqd. for impact idlers.
6. Housing material i.e. CRCA steel or C.I. & so on.
7. Bearing size, type & make i.e. 6205 or 420205 & so on.
8. Quantity in Nos.
9. Your detailed drawing, if possible.

Caring Idlers ensures achievement of operational success of belt conveyor in a way. The shell is made from M.S. ERW black steel tube, pressed steel housing made from CRCA sheet, shaft of bright steel bar, sealing system consisting of (back seal, double labyrinth, molded dust cover, a rain cap), single piece fabricated steel idler frame and rollers fitted with size resistant ball bearings that conforms to IS:8598

Range comprises of Troughing (3/5 rolls) for carrying, Return (1 roll) for return side, Troughing Impact Idlers (rubber lined), Flat Impact, & Return Self Aligning.

Minimum Information Reqd. While Sending Enquiry / Order :

1. Belt width2. Degree of picking Idlers.3. Angle size4. Idler pipe size (OD)5. Overall O.D. in case rubber lined idlers is reqd. for impact idlers.6. Housing material i.e. CRCA steel or C.I. & so on.7. Bearing size, type & make i.e. 6205 or 420205 & so on.8. Quantity in Nos.9. Your detailed drawing, if possible.

Throughing impact idler is used in the conveyor belt automation system to absorb impact loads and protect rollers and belts from any damage, by owing the significance of the troughing impact idler and its requisite in the conveyor belt automation system, we as a manufacturer of conveyor system and system parts bring forth a troughing impact idler that is equipped with high qualitative bearings, small diameter shell integrated with concentric rubberized rings at specific intervals to endow cushioning effect to that absorbs the impact during the operation and reduce the detrimental effect to the belt.Troughing Impact IdlerOur troughing impact idlers are extremely effective when it is a matter of supporting the base of the conveyor belt and reduce the rolling resistance along with augment the life of the conveyor belt. These offered troughing conveyor idlers are available in multifarious length and standard troughing angles inclusive of 30, 35 and 45 and are installed beneath the troughed belt over the full loading length to support the loaded belt that reduces spillage and enhance the carrying capacity of a belt for a given width.