Our Products
Industrial Steel Pipes
1 Products availableSteel & Steel Products
1 Products availableSaw Pipe
1 Products availableWe are leaders in the market for providing best range of Alloy Steel Tubes, Carbon Steel Seamless Pipes AND Tubes, Carbon Steel Pipes, Carbon Steel Saw Pipes and Stainless Steel Capillary Tubes
This specification covers seamless and welded steel line pipe. It includes standard-weight and extra-strong threaded line pipe. It includes standard-weight and extra-strong threaded line pipe; and standard-weight plain-end, regular-weight plain-end, special plain-end, extra-strong plain-end, special plain-end, extra-strong plain-end pipe; as as well as bell and spigot and through-the-flow line(TFL) pipe. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.
Wall Thickness available:Schedule 20 - Schedule XXS (heavier on request) up to 250 mm thk.
Additional Testing : NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc. Dimensions :All Pipe is manufactured and inspected/tested to the relevant standards including ASTM, ASME, API.
Chemical Composition
The composition of pipe furnished to this specification, as determined by heat analysis for pipe other than Grade X 80, shall conform to the chemical requirements specified in Table 2, except that by agreement between the purchaser and the manufacturer carbon contents higher than those specified may be used. the composition of intermediate grades(higher than X42)shall conform to chenical requirements agreed upon between the manufacturer and the purchaser, and such requirements shall be consistent with the requirements specified in Table 2 for the applicable type of pipe For Grades X42 and higher, by agreement between the purchaser and the manufacturer, element other than columbium, vanadium, and titanium may be used; however, caution should be exercised in determining the quantity that may be present for any particular size and thickness of pipe because the addition of such otherwise desirable elements may alter the weldability of the pipe. API 5L Line Pipe Physical Properties . Line pipe grade designations come from API Spec 5L Specification for Line Pipe. Standard Line Pipe has grade designation A and B. Stronger grades have the designation X followed by the specified minimum yield strength of the pipe steel, measured in kilopounds per square inch (abbreviated ksi), e.g. X60 for pipe having a minimum yield strength of 60 ksi. See the table below for the standard available grades.
1 -API 5L elongation figures vary with specimen dimensions. Values shown for 0.2 sq. in. specimen. Line pipe mechanical testing usually omits Reduction of Area (RA) measurement reporting, and Charpy V-Notch (CVN) testing. This prevents use of this pipe as body material above 36 ksi yield strength for API Spec 6A equipment without retesting for Reduction of Area, and in the case of low temperature service, Charpy V-Notch testing as well. API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipe Packing
API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipe is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation.
API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipee packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.
Delivery: Within 10-25days or asap if we have enough stock
Line Pipe Physical Properties
API 5L Grade | Yield Strength min. (ksi) |
Tensile Strength min. (ksi) |
Yield to Tensile Ratio (max.) |
Elongation min. %1 |
A | 30 | 48 | 0.93 | 28 |
B | 35 | 60 | 0.93 | 23 |
X42 | 42 | 60 | 0.93 | 23 |
X46 | 46 | 63 | 0.93 | 22 |
X52 | 52 | 66 | 0.93 | 21 |
X56 | 56 | 71 | 0.93 | 19 |
X60 | 60 | 75 | 0.93 | 19 |
X65 | 65 | 77 | 0.93 | 18 |
X70 | 70 | 82 | 0.93 | 17 |
X80 | 80 | 90 | 0.93 | 16 |
Allied Pipelines India is one of the leading manufacturers and exporters of API 5L X65 PSL 1/2 - API 5L X65 PSL1/2 Pipes PSL-1/PSL-2 Seamless, Carbon Steel API 5L X65 PSL1/2 Pipes, API 5L X65 PSL1/2 Pipes, premier suppliers of bulk CS API 5L X65 PSL1/2 Pipes stock worldwide
Fast delivery guaranteed for every size carbon steel API 5L X65 PSL1/2 Pipes, seamless API 5L X65 PSL1/2 Pipes, largest range of API 5L X65 PSL1/2 Pipes suppliers in India.
We are particularly proud to be renowned as a reliable and dynamic partner in design, manufacture and supply of API 5L X65 PSL1/2 Pipes, & we are keeping A Large Stock In India. We do production of API 5L X65 PSL1/2 Pipes for sale in Bahrain, UAE, Saudi Arabia, Oman, Kuwait, Lebanon, Egypt, Turkey, Qatar, India and many other countries.
Allied Pipelines India is a International professional manufacturer of API 5L X65 PSL1/2 Pipes and other Industrial materials. We supply all kind of API 5L X65 PSL1/2 Pipes & steel material for your projects within timeline to anywhere in the world, contact us now for request a quote. We always try our best to help our customers with the best products and service on the market.
Our Products : api seamless pipe, api welded pipe, x65 pipe, x70 pipe, x60 pipe, api pipe stock, api 5l x60 psl2, api 5l x65 psl2, api 5l x70 psl2, api pipe stockiest, api pipes, api 5l pipes, x60 psl2 pipe, x65 psl2 pipe, x70 psl2 pipe, api pipe stock, api welded pipe, api saw pipe, api steel pipe, api lsaw pipe, api dsaw pipe, api pipe, api psl2 pipe, api psl1 pipe, api pipe stockist, api pipes india, api pipe Singapore, api pipe stockist, x65 pipe, x60 pipe, x70 pipe, api jfe origin pipe, api sumitomo origin pipeWE EXPORT API SEAMLESS & WELDED PIPES TO : UAE, Dubai, Abu Dhabi, Jebel Ali, Sharjah, Germany, Iraq, USA, Singapore, Indonesia, Malaysia, Vietnam, Australia, Houston, Texas, Italy, Spain, Netherlands, Belgium, Taiwan, France, Polland, Thailand, India, Croatia, South Korea, Korea, North Korea
The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.
Wall Thickness available:
Schedule 20 - Schedule XXS (heavier on request) up to 250 mm thk.
Additional Testing : NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc. Dimensions :All Pipe is manufactured and inspected/tested to the relevant standards including ASTM, ASME, API.
Chemical Composition
The composition of pipe furnished to this specification, as determined by heat analysis for pipe other than Grade X 80, shall conform to the chemical requirements specified in Table 2, except that by agreement between the purchaser and the manufacturer carbon contents higher than those specified may be used. the composition of intermediate grades(higher than X42)shall conform to chenical requirements agreed upon between the manufacturer and the purchaser, and such requirements shall be consistent with the requirements specified in Table 2 for the applicable type of pipe For Grades X42 and higher, by agreement between the purchaser and the manufacturer, element other than columbium, vanadium, and titanium may be used; however, caution should be exercised in determining the quantity that may be present for any particular size and thickness of pipe because the addition of such otherwise desirable elements may alter the weldability of the pipe. API 5L Line Pipe Physical Properties . Line pipe grade designations come from API Spec 5L Specification for Line Pipe. Standard Line Pipe has grade designation A and B. Stronger grades have the designation X followed by the specified minimum yield strength of the pipe steel, measured in kilopounds per square inch (abbreviated ksi), e.g. X60 for pipe having a minimum yield strength of 60 ksi. See the table below for the standard available grades.1 -API 5L elongation figures vary with specimen dimensions. Values shown for 0.2 sq. in. specimen. Line pipe mechanical testing usually omits Reduction of Area (RA) measurement reporting, and Charpy V-Notch (CVN) testing. This prevents use of this pipe as body material above 36 ksi yield strength for API Spec 6A equipment without retesting for Reduction of Area, and in the case of low temperature service, Charpy V-Notch testing as well. API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipe Packing
API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipe is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation.
API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipee packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.
Delivery: Within 10-25days or asap if we have enough stock
Line Pipe Physical Properties
API 5L Grade | Yield Strength min. (ksi) |
Tensile Strength min. (ksi) |
Yield to Tensile Ratio (max.) |
Elongation min. %1 |
A | 30 | 48 | 0.93 | 28 |
B | 35 | 60 | 0.93 | 23 |
X42 | 42 | 60 | 0.93 | 23 |
X46 | 46 | 63 | 0.93 | 22 |
X52 | 52 | 66 | 0.93 | 21 |
X56 | 56 | 71 | 0.93 | 19 |
X60 | 60 | 75 | 0.93 | 19 |
X65 | 65 | 77 | 0.93 | 18 |
X70 | 70 | 82 | 0.93 | 17 |
X80 | 80 | 90 | 0.93 | 16 |
Submerged Arc Welded [SAW] Pipes
Allied Pipelines India Carbon Steel SAW Pipe manufacturing facility consists of a JCO Press, Helical / Spiral Mills, number of Three Roll Plate Bending Machine, Inside & Outside welding lines, Heat Treatment Furnace and all necessary Testing Equipment to produce high quality pipes conforming to various International Standards. These facilities are capable of manufacturing pipes in various grades.
The pipes are supplied according to appropriate standards as well as customer specifications in a large variety of steel grades and dimensions. Specific requirements on execution, tolerances, lengths, and mechanical & chemical properties are offered on request.
Products Manufactured:
1 | Pipes can be supplied as per Customer Specification also. | ||||
2 | Pipes up to 64 [1626 MM] can be manufactured with online or two step [offline] welding system. Pipes above 64 [1626 MM] shall be manufactured with online welding system. | ||||
3 | For size above 100 [2540 MM] 100% Manual Ultrasonic Testing of weld shall be carried instead of Hydro Test. | ||||
4 | For size above 142 [3600 MM] 100% Manual Ultrasonic Testing of weld shall be carried instead of Hydro Test. | ||||
5 | Mobile Plant can be set-up near the site for manufacturing of pipes. |
Salient Features:
Application Industry:
Oil and Gas Pipeline
Power Plant
Water & Sewerage
Structural
Other Industrial
TYPE |
DIAMETER RANGE |
THICKNESS RANGE |
SPECIFICATION¹ |
||
Longitudinal Submerged Arc Welded [L-SAW] Pipes |
12” [323.9 MM] |
0.2” [5 MM] |
As per ASTM |
||
Helical / Spiral Submerged Arc Welded [H-SAW] Pipes |
16” [406.4 MM] |
0.16” [4 MM] |
As per ASTM |
||
Longitudinal with Circumferential Seam Submerged Arc Welded Pipes |
32” [812.8 MM] |
0.2” [5 MM] |
As per ASTM |
We bring forth for our clients a quality assured range of tubes ofASTM A179 seamless tubes, that is used in heat exchangers and condensers. Offered in the grade of 179, these tubes are suitable for heat transfer applications because of their temperature withstanding capabilities.
TheseASTM A179 seamless tubesare produced using extrusion or rotary piercing which have been sourced from the reliable and certified vendors. OurASTM A179 seamless tubesare used in sugar mills & distilleries, pumps and petrochemicals, cement and construction industries and steel plants.
Features:
Standard: |
ASTM A179 Seamless Tubes |
Description 1. Standards: ASTM A179 (ASME SA179)2. Applications: heat exchangers, condensers, heat transfer equipment and similar pipes.3. Grade: A 1794. Specifications:Diameter: 10.3 to 76.2 mm;Thickness: 1.2 to 12 mm;Length: 6 m and above;Modified specifications according to customer requirements.5. Chemical composition and mechanical properties.
Seamless Cold Drawn Low Carbon Steel Heat Exchanger and Condenser Tubes |
|
Applications: |
For tubular heat exchangers,condensers,and similar heat transfer apparatuses. |
Size (mm): |
O.D.: 6.0~114.0; W.T.: 1~15; L: max 12000 |
Grade and Chemical Composition (%)
Chemical Composition |
C |
Mn |
P≤ |
S≤ |
Si≤ |
0.06-0.18 |
0.27-0.63 |
0.035 |
0.035 |
0.25 |
SA-450/SA-450M:
OD In (mm) |
+ |
- |
WT In (mm) |
+ |
- |
<1(25.4) |
0.10 |
0.10 |
≤1.1/2(38.1) |
20% |
0 |
1∼1.1/2(25.4∼38.1) |
0.15 |
0.15 |
>1.1/2(38.1) |
22% |
0 |
>1.1/2∼<2(38.1∼50.8) |
0.20 |
0.20 |
|
|
|
2∼<2.1/2(50.8∼63.5) |
0.25 |
0.25 |
|
|
|
2.1/2∼<3(63.5∼76.2) |
0.30 |
0.30 |
|
|
|
3∼4(76.2∼101.6) |
0.38 |
0.38 |
|
|
|
>4∼7.1/2(101.6∼190.5) |
0.38 |
0.64 |
|
|
|
>7.1/2∼9(190.5∼228.6) |
0.38 |
1.14 |
|
|
|