Our Products
Valves & Valve Fittings
2 Products availableSigns
1 Products availableSeparators & Strainers
1 Products availableStub Ends
1 Products availableFlanges
1 Products availablePlumbing & Pipe Fittings
1 Products availableLeading Manufacturer, Supplier & Retailer of PP Diaphragm Valve Screw End and PP Ball Valve Screw End.
Engineering Options:
Available M.O.C.:
| Technical Data | |
| Construction | 3 piece design, Single piece stem (spindle) Reinforced Ball, Teflon seated, full bore |
| Design & Manufacturings STD | As per Manufacturer's Standard |
| End Connections | Flanged as per ANSI B 16.5 (150#) & as per BS 10(Table D/E/F) & DIN STD. |
| 13 | Handle Cap | PP / HDPE | 1 |
| 12 | Handle Hex.Pin | M.S.(EN8) / S.S. | 1 |
| 11 | Handle | M.S. PP Coated | 1 |
| 10 | Nut Cap | PP/HDPE | Req. |
| 09 | Stud.Nut & Washer | M.S.(EN8) / S.S. | Req. |
| 08 | Stem O-Ring | Neoprene | 1 |
| 07 | Stem Seal Ring | PTFE | 1 |
| 06 | Connector Seal | PTFE / PVC / Viton Rubber | 2 |
| 05 | Seat Ring | PTFE | 2 |
| 04 | STEM/SPINDLE | M.S. / S.S.PP / ISOPP/ PVDF Coated | 1 |
| 03 | Ball | PP / HDPE / ISOPP / PVDF | 1 |
| 02 | Side Piece/ Connector | PP / HDPE / ISOPP / PVDF | 2 |
| 01 | Body | PP / HDPE / ISOPP / PVDF | 1 |
| No. | Description | Material | Qty |
| ALL DIMENSIONS ARE IN MM -------------------------------------------------- (± 2MM) | |||||||
| Size | D | D1 | L | T | H | H1 | |
| IN. | MM | ||||||
| 1/2" | 15 | 100.0 | 13.5 | 129.0 | 12.7 | 69.0 | 131.0 |
| 3/4" | 20 | 101.0 | 19.0 | 142.0 | 14.0 | 75.0 | 131.0 |
| 1" | 25 | 121.0 | 25.0 | 158.0 | 21.0 | 92.0 | 161.0 |
| 1.1/2" | 40 | 138.0 | 38.0 | 182.0 | 22.0 | 111.0 | 205.0 |
| 2" | 50 | 165.0 | 50.0 | 210.0 | 23.0 | 122.0 | 205.0 |
| 2.1/2" | 65 | 182.0 | 63.5 | 234.0 | 25.0 | 140.0 | 262.0 |
| 3" | 80 | 200.0 | 75.0 | 255.0 | 25.0 | 148.0 | 262.0 |
| 4" | 100 | 226.0 | 100.0 | 297.0 | 28.0 | 170.0 | 335.0 |
| 6" | 150 | 303.0 | 150.0 | 425.0 | 35.0 | 236.0 | 405.0 |
Double Acting Features:
Features
| Technical Data | |
| 5/2 Internal pilot operated, Poppet type, Namur Solenoid valve | |
| Type | Pressure |
| 51424 | 2.10 Bar |
| 52408 | 0-10 Bar |
| Type | Inlet | Outlet | Exhaust | Pilot inlet | Pilot vent | Pilot |
| 51424 | 1 | 24 | 35 | 6 | Internal | |
| 52408 | 1 | 24 | 35 | 7 | 6 | External |
Engineering Options:
Available M.O.C.:
| Technical Data | |
| Construction | Weir type design, Soft seated, Raising stem |
| Design & Manufacturings STD | As per Manufacturer's Standard |
| End Connections | Flanged as per ANSI B 16.5 (150#) & as per BS 10(Table D/E/F) & DIN STD. |
| 09 | Nut, Bolt & Washer | M.S.Zink Coated / S.S. | 1 |
| 08 | Hand Wheel | PP/HDPE/ISOPP/PVDF | 1 |
| 07 | Pin | M.S./S.S. | 1 |
| 06 | Compressor | Glass Filled PP | 1 |
| 05 | Stem/Spindle Nut | M.S./S.S. | 1 |
| 04 | STEM/SPINDLE | M.S./S.S. | 1 |
| 03 | Diaphragm | Neoprene/Teflon Coated | 1 |
| 02 | Bonnet | PP/HDPE/ISOPP/PVDF | 1 |
| 01 | Body | PP/HDPE/ISOPP/PVDF | 1 |
| No. | Description | Material | Qty |
| ALL DIMENSIONS ARE IN MM -------------------------------------------------- (± 2MM) | |||||||
| Size | D | D1 | L | T | H | W | |
| IN. | MM | ||||||
| 1/2" | 15 | 95.0 | 15.0 | 116.0 | 15.0 | 85.0 | 59.5 |
| 3/4" | 20 | 101.0 | 20.0 | 120.0 | 16.5 | 96.5 | 59.5 |
| 1" | 25 | 121.0 | 25.0 | 133.0 | 16.5 | 113.5 | 70.5 |
| 1.1/2" | 40 | 141.0 | 38.0 | 167.0 | 19.5 | 175.0 | 91.0 |
| 2" | 50 | 166.5 | 50.0 | 200.0 | 21.0 | 195.0 | 105.0 |
| 2.1/2" | 65 | 183.0 | 63.5 | 244.0 | 24.0 | 208.0 | 198.0 |
| 3" | 80.0 | 204.0 | 77.0 | 248.0 | 25.0 | 211.0 | 198.0 |
| 4" | 100 | 227.0 | 102.0 | 335.0 | 25.0 | 229.0 | |
Engineering Options:
Available M.O.C.:
| Technical Data | |
| Construction | Ball type design, Soft seated |
| Design & Manufacturings STD | As per Manufacturer's Standard |
| End Connections | Flanged as per ANSI B 16.5 (150#) & as per BS 10(Table D/E/F) & DIN STD. |
| 05 | Seat Ring | Neoprene Rubber | 1 |
| 04 | Ball Ring | PP/HDPE/ISOPP/PVDF | 1 |
| 03 | Ball | PP/HDPE/ISOPP/PVDF | 1 |
| 02 | Bottom Body | PP/HDPE/ISOPP/PVDF | 1 |
| 01 | Top Body | PP/HDPE/ISOPP/PVDF | 1 |
| No. | Description | Material | Qty |
| ALL DIMENSIONS ARE IN MM -------------------------------------------------- (± 2MM) | |||||
| Size | D | D1 | L | T | |
| IN. | MM | ||||
| 1" | 25 | 122.5 | 26.0 | 161.0 | 18.0 |
| 1.1/2" | 40 | 140.0 | 38.5 | 182.0 | 21.0 |
| 2" | 50 | 166.5 | 54.0 | 189.0 | 23.0 |
| 2.1/2" | 65 | 182.0 | 64.5 | 263.0 | 25.0 |
| 3" | 80 | 199.0 | 77.0 | 274.0 | 26.0 |
| 4" | 100 | 229.0 | 101.0 | 321.0 | 26.0 |
Available M.O.C.:
| Technical Data | |
| Construction | 1 piece |
| Design & Manufacturings STD | As per Manufacturer's Standard |
| End Connections | Flanged as per ASA 150 |
| ALL DIMENSIONS ARE IN MM ------------------------------------------------- (± 2MM) | |||||||||
| Size | A | B | C | CD | L | N | CD | K | |
| IN. | MM | ||||||||
| 4" | 100 | 54 | 115 | 184 | 104 | 220 | 8 | 19.0 | 190.5 |
| 04 | Lever | PP/HDPE/ISOPP/PVDF | 1 |
| 03 | Seat | NITRILE, NEOPRENE | 1 |
| 02 | Disc | PP/HDPE/ISOPP/PVDF | 1 |
| 01 | Body | PP/HDPE/ISOPP/PVDF | 1 |
| No. | Description | Material | Qty |
Engineering Options:
Available M.O.C.:
| Technical Data | |
| Construction | 3 piece Design, Full Bore, Borosil Glass, Teflon Seated |
| Design & Manufacturings STD | As per Manufacturer's Standard |
| End Connections | Flanged as per ANSI B 16.5 (150#) & as per BS 10(Table D/E/F) & DIN STD. |
| ALL DIMENSIONS ARE IN MM -------------------------------------------------- (± 2MM) | |||||
| Size | D | D1 | L | T | |
| IN. | MM | ||||
| 3/4" | 20 | 101.0 | 19.0 | 177.0 | 14.0 |
| 1" | 25 | 120. | 24.0 | 191.0 | 20.0 |
| 1.1/2" | 40 | 138.0 | 38.0 | 198.0 | 22.0 |
| 2" | 50 | 163.0 | 50.0 | 220.0 | 24.5 |
| 2.1/2" | 65 | 182.0 | 63.5 | 255.0 | 24.5 |
| 3" | 80 | 200.0 | 75.0 | 267.0 | 26.0 |
| 4 | 100 | 226.0 | 100.0 | 281.0 | 28.0 |
| 6 | 150 | 305.0 | 150.0 | 403.0 | 34.0 |
| 07 | Stud Tube | PVC / PP Coated | Req. |
| 06 | Nut Cap | PP / HDPE | Req. |
| 05 | Nut & Washer | M.S. (EN) / S.S. | Req. |
| 04 | Stud | M.S. (EN) / S.S. | Req. |
| 03 | Crisent Ring | PTFE | 2 |
| 02 | Glass Tube | Glass (Borosil) | 1 |
| 01 | Side Piece/Connector | PP / HDPE / ISOPP / PVDF | 2 |
| No. | Description | Material | Qty |
Engineering Options:
Available M.O.C.:
| Technical Data | |
| Construction | 3 piece Design, Full Bore, Borosil Glass, Teflon Seated |
| Design & Manufacturings STD | As per Manufacturer's Standard |
| End Connections | Flanged as per ANSI B 16.5 (150#) & as per BS 10(Table D/E/F) & DIN STD. |
| 06 | Flange | PP / HDPE / ISOPP / PVDF | 2 |
| 05 | Side Piece | PP / HDPE / ISOPP / PVDF | 2 |
| 04 | Cover Gasket | Neoprene Rubber | 1 |
| 03 | Cover | PP / HDPE / ISOPP / PVDF | 1 |
| 02 | Screen | 80 Mess PP Screen | 1 |
| 01 | Body | PP / HDPE / ISOPP / PVDF | 1 |
| No. | Description | Material | Qty |
| ALL DIMENSIONS ARE IN MM -------------------------------------------------- (± 2MM) | ||||||||
| Size | D | D1 | L | L1 | T | T1 | H | |
| IN. | MM | |||||||
| 1" | 25 | 123.0 | 25.0 | 226.0 | 200.0 | 13.0 | 19.0 | 92.0 |
| 1.1/2" | 40 | 142.0 | 39.0 | 278.0 | 252.0 | 13.0 | 22.0 | 115.0 |
| 2" | 50 | 166.0 | 49.0 | 310.0 | 282.0 | 14.5 | 22.0 | 148.5 |
| 3" | 80 | 204.0 | 74.0 | 348.0 | 317.0 | 15.0 | 22.5 | 182.0 |
Available M.O.C.:
Engineering Options:
| BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM) | ||||||
| Size | C | D | D1 | D2 | L | |
| IN. | MM | |||||
| 1/2" | 20 | 35.5 | 21.0 | 14.0 | 23.0 | 3.0 |
| 3/4" | 25 | 40.0 | 25.0 | 19.0 | 28.0 | 4.0 |
| 1" | 25 | 40.0 | 25.0 | 19.0 | 28.0 | 4.0 |
| 1.1/4" | 40 | 60.0 | 40.0 | 29.0 | 43.0 | 6.0 |
| 1.1/2" | 50 | 71.0 | 50.0 | 37.0 | 54.0 | 8.0 |
| 2" | 63 | 80.0 | 63.0 | 47.5 | 65.0 | 10.0 |
| 21.2" | 75 | 90.0 | 75.0 | 59.0 | 78.0 | 12.0 |
| 3" | 90 | 109.0 | 90.0 | 73.0 | 95.0 | 14.0 |
| 4" | 110 | 135.0 | 108.5 | 88.0 | 114.0 | 15.0 |
| 6" | 160 | 220.0 | 158.5 | 133.5 | 169.0 | 16.0 |
Available M.O.C.:
| BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM) | |||||||
| Size | D | D1 | D2 | H | L | L | |
| IN. | MM | ||||||
| 1/2" | 20 | 20.5 | 14.5 | 24.0 | 25.0 | 50.0 | 3.0 |
| 3/4" | 25 | 26.0 | 19.5 | 28.5 | 31.0 | 61.5 | 4.0 |
| 1" | 32 | 32.5 | 25.0 | 36.0 | 37.0 | 75.5 | 5.0 |
| 1.1/4" | 40 | 40.5 | 31.0 | 43.5 | 44.5 | 90.0 | 6.0 |
| 1.1/2" | 50 | 49.5 | 38.0 | 53.0 | 47.5 | 98.0 | 8.0 |
| 2" | 63 | 62.5 | 49.0 | 66.0 | 57.0 | 115.5 | 10.0 |
| 2.1/2" | 75 | 73.0 | 59.5 | 79.0 | 80.0 | 164.5 | 12.0 |
| 3" | 90 | 91.0 | 75.0 | 95.5 | 95.0 | 194.0 | 14.0 |
| 4" | 110 | 109.0 | 89.0 | 114.0 | 118.5 | 238.0 | 15.0 |
| 6" | 160 | 160.0 | 135.0 | 168.0 | 171.0 | 345.0 | 16.0 |
Available M.O.C.:
| BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM) | |||||||
| Size | D | D1 | D2 | D3 | T | T1 | |
| IN. | MM | ||||||
| 1/2" | 20 | 52.0 | 14.0 | 21.0 | 25.5 | 37.0 | 10.0 |
| 3/4" | 25 | 61.0 | 18.0 | 25.5 | 29.0 | 37.5 | 11.0 |
| 1" | 32 | 65.5 | 23.5 | 32.5 | 36.0 | 51.0 | 12.0 |
| 1.1/4" | 40 | 71.0 | 27.0 | 40.0 | 44.0 | 50.0 | 12.0 |
| 1.1/2" | 50 | 75.0 | 39.0 | 50.0 | 53.0 | 48.5 | 11.5 |
| 2" | 63 | 95.0 | 47.5 | 63.0 | 66.0 | 50.0 | 12.5 |
| 2.1/2" | 75 | 105.0 | 56.0 | 75.5 | 78.5 | 49.0 | 14.0 |
| 3" | 90 | 112.0 | 68.5 | 90.0 | 94.0 | 78.5 | 18.0 |
| 4" | 110 | 155.0 | 84.0 | 110.0 | 116.0 | 79.5 | 20.0 |
| 5" | 125 | 188.0 | 97.5 | 126.0 | 132.0 | 78.0 | 19.0 |
| 5.1/4" | 140 | 195.0 | 113.0 | 140.5 | 147.0 | 78.0 | 22.5 |
| 6" | 160 | 211.0 | 128.0 | 160.0 | 165.0 | 80.0 | 25.0 |
| 7" | 180 | 228.0 | 148.0 | 181.0 | 184.5 | 81.0 | 28.0 |
| 8" | 200 | 241.0 | 167.0 | 200.0 | 207.0 | 79.0 | 23.0 |
| 9" | 225 | 273.5 | 191.0 | 225.0 | 231.5 | 79.0 | 32.5 |
| 10" | 250 | 294.0 | 209.0 | 248.5 | 250.0 | 79.5 | 31.0 |
| 11" | 280 | 325.0 | 216.0 | 280.0 | 285.0 | 94.5 | 31.0 |
| 12" | 315 | 373.0 | 255.0 | 314.5 | 317.0 | 94.5 | 31.0 |
Available M.O.C.:
* Flange Drilled
| BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM) | ||||
| Size | D | D1 | T | |
| IN. | MM | |||
| 1/2" | 20 | 95.0 | 25.5 | 16.0 |
| 3/4" | 25 | 101.0 | 32.0 | 17.5 |
| 1" | 32 | 122.5 | 37.0 | 18.5 |
| 1.1/4" | 40 | 134.0 | 47.0 | 19.0 |
| 1.1/2" | 50 | 140.0 | 57.0 | 21.0 |
| 2" | 63 | 164.0 | 70.0 | 21.0 |
| 2.1/2" | 75 | 184.0 | 83.0 | 21.0 |
| 3" | 90 | 202.5 | 97.5 | 22.0 |
| 4" | 110 | 228.0 | 118.0 | 22.5 |
| 5" | 125 | 266.0 | 133.0 | 23.0 |
| 5.1/4" | 140 | 263.0 | 145.0 | 24.5 |
| 6" | 160 | 298.5 | 167.0 | 25.5 |
| 7" | 180 | 329.0 | 188.0 | 27.0 |
| 8" | 200 | 375.0 | 207.5 | 30.0 |
| 9" | 225 | 398.0 | 233.0 | 32.5 |
| 10" | 250 | 427.0 | 257.0 | 30.5 |
| 11" | 280 | 451.0 | 287.0 | 32.0 |
| 12" | 315 | 489.0 | 325.0 | 29.0 |
Available M.O.C.:
| BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM) | ||||||
| Size | D | D1 | D2 | D3 | T | |
| IN. | MM | |||||
| 1 x 1/2 | 32 x 20 | 32.0 | 22.0 | 14.0 | 20.0 | 48.0 |
| 1 x 3/4 | 32 x 25 | 32.0 | 22.0 | 17.0 | 25.0 | 50.0 |
| 1.1/4 x 1/2 | 40 x 20 | 40.0 | 28.0 | 15.0 | 20.0 | 51.0 |
| 1.1/4 x 3/4 | 40 x 25 | 40.0 | 28.0 | 14.0 | 25.0 | 53.0 |
| 1.1/4 x 1 | 40 x 32 | 40.0 | 28.0 | 22.5 | 32.0 | 55.0 |
| 1.1/2 x 1/2 | 50 x 20 | 50.0 | 34.0 | 12.5 | 20.0 | 55.5 |
| 1.1/2 x 3/4 | 50 x 25 | 50.0 | 40.0 | 20.0 | 25.0 | 57.0 |
| 1.1/2 x 1 | 50 x 32 | 50.0 | 34.0 | 20.0 | 32.0 | 55.0 |
| 1.1/2 x 1.1/4 | 50 x 40 | 50.0 | 34.0 | 30.0 | 40.0 | 57.0 |
| 2 x 1 | 63 x 32 | 63.0 | 45.0 | 21.0 | 32.0 | 76.0 |
| 2 x 1.1/4 | 63 x 40 | 63.0 | 45.0 | 28.0 | 40.0 | 85.0 |
| 2 x 1.1/2 | 63 x 50 | 63.0 | 44.5 | 32.0 | 50.0 | 74.0 |
| 2.1/2 x 1 | 75 x 32 | 75.0 | 55.0 | 20.0 | 32.0 | 82.0 |
| 2.1/2 x 1.1/4 | 75 x 40 | 75.0 | 54.0 | 27.0 | 40.0 | 60.0 |
| 2.1/2 x 1.1/2 | 75 x 50 | 75.0 | 55.0 | 36.0 | 50.0 | 76.0 |
| 2.1/2 x 2 | 75 x 63 | 75.0 | 55.0 | 45.0 | 63.0 | 84.0 |
| 3 x 1 | 90 x 32 | 90.0 | 70.0 | 25.0 | 32.0 | 78.0 |
| 3 x 1.1/4 | 90 x 40 | 90.0 | 67.5 | 29.0 | 40.0 | 80.0 |
| 3 x 1.1/2 | 90 x 50 | 90.0 | 65.0 | 39.0 | 50.0 | 80.0 |
| 3 x 2 | 90 x 63 | 90.0 | 63.0 | 49.0 | 63.0 | 76.0 |
| 3 x 2.1/2 | 90 x 75 | 90.0 | 69.0 | 57.0 | 75.0 | 71.0 |
| 4 x 1 | 110 x 32 | 110.0 | 82.0 | 23.0 | 32.0 | 93.0 |
| 4 x 1.1/4 | 110 x 40 | 110.0 | 82.0 | 29.0 | 40.0 | 94.5 |
| 4 x 1.1/2 | 110 x 50 | 110.0 | 82.0 | 34.0 | 50.0 | 91.0 |
| 4 x 2 | 110 x 63 | 110.0 | 82.0 | 47.0 | 63.0 | 95.0 |
| 4 x 2.1/2 | 110 x 75 | 110.0 | 82.0 | 52.0 | 75.0 | 92.5 |
| 4 x 3 | 110 x 90 | 110.0 | 82.0 | 78.0 | 91.0 | 95.0 |
| 6 x 2 | 160 x 63 | 160.0 | 130.0 | 44.0 | 63.0 | 133.0 |
| 6 x 2.1/2 | 160 x 75 | 160.0 | 131.0 | 56.0 | 75.0 | 128.0 |
| 6 x 3 | 160 x 90 | 160.0 | 131.0 | 69.0 | 90.0 | 127.0 |
| 6 x 4 | 160 x 110 | 160.0 | 131.0 | 85.0 | 110.0 | 132.0 |
| 8 x 2 | 200 x 63 | 200.0 | 163.0 | 49.0 | 63.0 | 198.0 |
| 8 x 3 | 200 x 90 | 200.0 | 163.0 | 71.0 | 90.0 | 197.0 |
| 8 x 4 | 200 x 110 | 200.0 | 163.0 | 85.0 | 110.0 | 197.0 |
| 8 x 6 | 200 x 160 | 200.0 | 163.0 | 122.0 | 160.0 | 198.0 |
| 8 x 7 | 200 x 180 | 200.0 | 163.0 | 139.0 | 180.0 | 197.0 |
| 9 x 2 | 225 x 63 | 225.0 | 182.0 | 49.0 | 63.0 | 197.0 |
| 9 x 3 | 225 x 90 | 225.0 | 182.0 | 70.0 | 90.0 | 196.0 |
| 9 x 4 | 225 x 110 | 225.0 | 182.0 | 85.0 | 110.0 | 197.0 |
| 9 x 6 | 225 x 160 | 225.0 | 182.0 | 124.0 | 160.0 | 196.0 |
| 9 x 8 | 225 x 200 | 225.0 | 182.0 | 158.0 | 200.0 | 197.0 |
| 10 x 2 | 250 x 63 | 250.0 | 200.0 | 49.0 | 63.0 | 196.0 |
| 10 x 3 | 250 x 90 | 250.0 | 203.0 | 71.0 | 90.0 | 196.0 |
| 10 x 4 | 250 x 110 | 250.0 | 200.0 | 85.0 | 110.0 | 196.0 |
| 10 x 6 | 250 x 160 | 250. | 201.0 | 124.0 | 160.0 | 196.0 |
| 10 x 8 | 250 x 200 | 250.0 | 201.0 | 153.0 | 200.0 | 196.0 |
| 12 x 4 | 315 x 110 | 315.0 | 254.0 | 84.0 | 110.0 | 212.0 |
| 12 x 6 | 315 x 160 | 315.0 | 257.0 | 123.0 | 160.0 | 212.0 |
| 12 x 8 | 315 x 200 | 315.0 | 255.0 | 158.0 | 200.0 | 212.0 |
| 12 x 10 | 315 x 250 | 315.0 | 257.0 | 197.0 | 250.0 | 212.0 |
| 14 x 12 | 212.0 | |||||
Available M.O.C.:
| BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM) | |||||||
| Size | D | D1 | D2 | T | T1 | T2 | |
| IN. | MM | ||||||
| 1 x 3/4 | 32 x 25 | 129.0 | 13.5 | 21.5 | 126.0 | 19.0 | 44.0 |
| 1 x 1 | 32 x 32 | 130.0 | 19.0 | 27.0 | 125.0 | 21.0 | 51.0 |
| 1.1/2 x 1 | 50 x 32 | 140.0 | 19.0 | 26.0 | 135.0 | 20.0 | 50.0 |
| 1.1/2 x 1.1/4 | 50 x 40 | 140.0 | 22.0 | 33.0 | 135.0 | 21.0 | 55.0 |
| 1.1/2 x 1.1/2 | 50 x 50 | 140.0 | 17.5 | 40.0 | 135.0 | 18.0 | 50.0 |
| 2 x 1 | 63 x 32 | 162.0 | 17.5 | 26.0 | 127.0 | 22.0 | 50.0 |
| 2 x 1.1/4 | 63 x 40 | 162.0 | 22.0 | 34.0 | 120.0 | 22.0 | 60.0 |
| 2 x 1.1/2 | 63 x 50 | 162.0 | 27.0 | 40.0 | 120.0 | 22.0 | 60.0 |
| 2 x 2 | 63 x 63 | 162.0 | 35.5 | 51.5 | 120.0 | 22.0 | 57.0 |
| 3 x 1.1/2 | 90 x 50 | 198.0 | 27.0 | 39.0 | 148.0 | 25.0 | 55.0 |
| 3 x 2 | 90 x 63 | 198.0 | 34.0 | 50.0 | 134.0 | 25.0 | 55.0 |
| 3 x 3 | 90 x 90 | 198.0 | 53.0 | 75.0 | 138.0 | 25.0 | 55.0 |
| 4 x 2 | 110 x 63 | 226.0 | 35.0 | 51.0 | 140.0 | 25.0 | 50.0 |
| 4 x 3 | 110 x 90 | 226.0 | 60.0 | 76.0 | 140.0 | 25.0 | 50.0 |
| 4 x 4 | 110 x 100 | 226.0 | 81.5 | 101.0 | 140.0 | 25.0 | 50.0 |
