ParthFlex Hydraulic Engineering

Ankleshwar gidc, Ankleshwar, Gujarat

Hose specification:BS EN 1762:2003 Type SD Lining:NBR rubber compound, smooth bore, resistant to n-pentane and aromatic contents up to 50%. Reinforcement:Multiple plies of Polyester Tyre cords plus stainless steel helical wire embedded in synthetic rubber CoverSynthetic black chloroprene rubber compound, weather, oil, abrasion and seawater resistant. Working Pressure:25 Bar Safety Factor:4 : 1 Nominal bore3", 4", 6", 10", 12" Temperature Range-30C to + 70C

MANUFACTURING STANDARD:BS 3492 Type 1B/2BBS 1435 Type S7/S10/S15EN 1765 Type S7/S10/S15IS 10733 Type 1B/2BIS 10733 Type S7/S10/S15 LININGSmooth bore, mandrel built, Nitrile lining to convey all grades of petroleum products, including crude oils and other liquid petroleum products having a maximum aromatics content of 40% (For 100% aromatic content a Viton lining is available). REINFORCEMENTFabric to reinforced lining, with multiple plies of synthetic cord fabric surrounding embedded high tensile steel wire helix.Hoses are supplied electrically continuous unless specifically requested to be electrically discontinuous. COVERSmooth, Polychloroprene (Neoprene) rubber compounded to resist abrasion, weathering and oil. WORKING PRESSURE VACUUMA 600 7 bar -0.85 BARA 501 10 BAR -0.85 BARA 602 15 BAR -0.85 BAR SAFETY FACTOR2 : 1

Note :

Polypropylene braided hose is often preferred in applications where aggressive environment tend to corrode SS braid. PP braid is lighter in weight and provides extreme flexibility. The tube is available in virgin or conductive black where electrostatic dissipation is required. Also available special vacuum resistant hose. Application:PP braided assemblies can be used for temperatures ranging from -70 C to 90 C. Suitable for exotic chemical transfer and applications requiring frequent handling and high flexibility. Fittings:Male, female, flanged, Triclover and PTFE flared / encapsulated fittings available in all the material.

The tube is extruded and helically convoluted PTFE with high tensile stainless steel AISI 304 braid. The tube is available in virgin or conductive black where electrostatic dissipation is required. Also available special vacuum resistant and or with Polypropylene braid for aggressive environment.

Application:Parthflex convoluted hose and assemblies are highly flexible and can be used at temperatures ranging from -70 C to 260 C. Suitable for most known chemicals, acids, oils, corrosives, alkalis, gases, steam, pharmaceutical and foodstuffs industries.

Fittings:Male, female, flanged, Triclover and PTFE flared / encapsulated fittings available in all the material

APPLICATION:Suction and delivery of abrasive material such as dry cement, grains, flour, powders and sand. LININGBlack Smooth, antistatic rubber to withstand passage of highly abrasive material. REINFORCEMENTMultiple layers of synthetic cord plus a single steel helix, giving a minimum bend radius of 6x bore size. COVERCorrugated for greater flexibility. Tough weather and abrasion resistant. WORKING PRESSURE VACUUM10 bar 0.85 bar. SAFETY FACTOR3.5 : 1

Tube:Smooth, cross-linked polyethylene Reinforcement:high strength synthetic cord, steel helix wire and antistatic copper wire. Cover:green, smooth (wrapped finish). Application of XLPE Chemical Suction Hose:hard wall hose suitable for handling a wide range of chemicals, petroleum products and oils. Normally installed on tank trucks and discharge platforms in chemical and oil industries.

Specially designed convoluted PTFE suction/pressure hose, with external vacuum high tensile wire and high tensile stainless steel braid. The hose has very good vacuum and kink resistance

PF 9 SAE 100 R9 HIGH PRESSURE WIRE SPIRAL HOSE

Pfhes high purity Platinum-cured silicone hose is internally reinforced with polyester yarn and SS304 spiral wire for pressure as well as vacuum application. The hose meets USP Class VI, FDA CFR 177.2600, ISO 10993, European Pharmacopoeia 3.1.9 and 3A standards.

Features

• Suitable for pharmaceutical, biomedical, cosmetic and food applications
• Full vacuum rating
• Translucent for visual flow detection
• Temperature range -70 C to 205 C
• Crush and kink resistant
• Imparts no taste or odour to critical media
• Sterilization by autoclave, CIP, SIP and gamma radiation

PF 4 SAE 100 R4 LOW PRESSURE SUCTION AND DISCHARGE HYDRAULIC HOSE

XLPE hose is designed to handle many types of chemicals and solvents in bothfull suction and discharge applications.The clear cross-linked polyethylene tube will handle many types of chemicals, acids and solvents without leaching and contaminating the product conveyed. Refer to the chemical resistance chart to determine compatibility

Tube:Cross linked polyethylene transparent (XLPE)

Reinforcement:Yarn and wire helix reinforcement with anti-static copper wire

Cover:Smooth EPDM rubber

For the Internal hose and the Jacketed hose our stainless steel corrugated hoses used, In each case with stainless steel Braiding. The internal and the Jacketed hose are joined with pressure tight fit.

Application :
When ordinary insulation is not sufficient for certain applications, or when specific minimum temperatures are needed to convey viscous substances, traced piping is generally used; this consists of two tubes, one inside the other, with various differences in cross-section. One of the tubes, generally the inner one, carries the medium, and the other one carries a heating or cooling agent ; sometimes it is the other way around .In other cases, the external tube is used as a safety measure. Occasionally, such traced piping has to be flexible. It is for such applications that we supply our Jacketed hose. It's high flexibility makes this hose very suitable for angular and lateral (offset) movements. The Jacketed hose is pressure-and vaccum-proof and, due to the materials used in its manufacture, resistant to temperature and corrosion. The large surface area of the corrugated section results in particularly high heat transfer efficiency, the hose combining the functions of a flexible conduit and a highly efficient heat exchanger in the simplest possible form.