Parth Enterprises

Bhosari, Pune, Maharashtra

• PARTH VALVES AND HOSES has extensive experience in manufacturing Butterfly valve in following Types, Wafer type design, lug type, Sanitary type, Double flange design , metal seated design.
• Size :1. 1 up to 24 (DN 25 up to DN 600) hygienic series. (From DN 700 to DN 4000 on request)2. 1.5 to 48 (DN 40 up to DN 1200) Industrial series
• Pressure Rating : PN10 (hygienic series) ASME 150# to 300#
• Materials : Cast Iron, Carbon Steel, stainless Steel (SS304, SS316, SS316L) , Duplex Stainless Steel, Super Duplex Stainless Steel, Alloys, Hastelloy, Inconel.
• Design Standard : API 609 / BS EN 558-1, / ISO 5752
• Pressure / Temperature Rating : ASME B 16.34
• Test (Inspection) Standard : API 598.
• Operation : Lever, Gear, Actuator (Pneumatic and Electric Motorized)
• Butterfly Valves are available in four different types versions :Centre LineDouble OffsetTripple Offset
• Special Service : almost all PARTH VALVES AND HOSES can designs in a special version as per customers Requirements. In this case, all the material details and technical features are given by the Customer & all Design aspects from us.

• Stem connection available in standard PARTH VALVES AND HOSES sizes or optional sizes to match standard secondary top plate drilling
• Nylon PA 12 coated disc option ensures excellent corrosion resistance to several chemical media. The hard, non-porous sintered polymer has very low hygroscopicity and is suitable for use in drinking water and non- alcoholic foodstuffs.
• Stem connection available in standard PARTH VALVES AND HOSES sizes or optional sizes to match standard secondary top plate drilling
• Unique Center-Lock seat design virtually eliminates any seat movement during the seating and un-seating of the disc.
• Heavy duty square-grooved seat design with molded O-ring seals to serve as flange gaskets. EPDM and Buna-N seats are peroxide cured to yield the best elastic properties of the elastomer.
• High strength disc with hand polished disc edge and hubs.
• Heavy duty one-piece body with extended neck for 2 piping insulation. Standard coating is two coats of hard, Zinc-rich epoxy for excellent corrosion resistance.
• Unique stem retention system to provide blow-out proof stem and easy assembly and disassembly of valve.

• Food Industry
• Dairy Industry
• Brewery Industry
• Pharmaceutical Industry
• Chemical Industry

We are Manufacturer, Exporter, Supplier, Authorized Dealer & Solution Provider. Our setup is situated in Pune, Maharashtra, India & majorly we serve our customers from countries like Shri Lanka, Bhutan, Bangladesh, Malaysia, Indonesian, Nepal, Europe, Africa, Gulf countries like UAE, Dubai, Bahrain, Oman, Qatar, Saudi Arabia, Egypt, Jordan, Lebanon, Syria, Yemen, Kuwait etc.

• PARTH VALVES AND HOSES has extensive experience in manufacturing wafer type, Swing type, In-Line type and Non-Slam Check Valves.
• Size : up to 12 (DN 15 up to DN 300)
• Pressure Rating : PN10 & PN16
• Materials : CI WCB, SS304, SS316, Carbon Steels, Polypropylene
• Design Standard : API 6D
• Temperature Rating : 80 degree to 180 degree.
• Test (Inspection) Standard : API 598
• Construction Details : Bolted Cover / Pressure Seal Bonnet, Lift Check Type, Swing Check, Piston Check, Tilting Disc, Non Slam Check
• End Connection: Screwed, Socket Weld, Flanged, Hub End, Butt-Weld
• Operator / Actuator : Manual

SALIENT FEATURES

• Compact : Requires little space in piping systems due to the short overall length.
• Light Weight : Wafer Check valve is much less in weight compared to conventional flanged end Swing Check valves.
• Bubble Tight Shut-off: The replaceable soft seal fitted in the body ensures a tight shut-off to prevent backflow.
• Long life of Seat Rings: The seat rings are fitted in the body in order to prevent contact with the flow, which results in longer life of the seat rings. This also ensures the retention of the seat rings in its original position. (i.e. the seat rings are not lost in the pipe due to the flow pressure)
• Easy Ft space saving installation : The valves are installed between two flanges and centering is achieved by means of body rim (outside diameter)
• Extremely low opening pressures.
• Easy to handle and maintain.
• Higher sizes available with counter balance and hydraulic cushioning on request.
• Low pressure drop: Decreasing with increasing valve size.
• Available in different materials of construction.
• Available in wide range of sizes

We are Manufacturer, Exporter, Supplier, Authorized Dealer & Solution Provider. Our setup is situated in Pune, Maharashtra, India & majorly we serve our customers from countries like Shri Lanka, Bhutan, Bangladesh, Malaysia, Indonesian, Nepal, Europe, Africa, Gulf countries like UAE, Dubai, Bahrain, Oman, Qatar, Saudi Arabia, Egypt, Jordan, Lebanon, Syria, Yemen, Kuwait etc.