Parksons Engineering Corporation

Fort, Mumbai, Maharashtra

• Description: Hydraulic Horizontal Single Column Bandsaw Machine

• Hydraulic operated pivot type band saw machine
• Improved worm reduction gearbox enabling low power consumption
• Auto shut off after job completion
• Chip removal brush and chip tray provided to avoid mixing of chips with coolant water
• Please use bimetal blades for optimal cutting output

Accuracy: For 100 mm diameter

• Cutting taper: 0.1 mm
• Cutting length: 0.2 mm

Application:

• Cutting round/ square bars, tubes and pipes
• Large profiles and solid materials

Accessories:Job Roller Stand, Swivel vice for angular cutting, Bimetal blades

• Description: Hydraulic Universal Cylindrical Grinding Machine

  • Hydraulic table traverse with infinitely variable speed range
  • Work head swivel of 90 with rapid approach for easy operation
  • Wheel head swivels 45, allowing conical and angular grinding
  • The slides are coated with Turcite-B linear bearing material to give stick slip free movements, reduce vibration and improve repetitive positioning accuracy
  • Hand-operated lubrications pump for sufficient lubrication of Slides

  Specifications: (In mm unless specified otherwise)

Accuracy: As per IS Standard 2368

• Surface finish 0.002 mm/100 mm
• True Run Out of Spindle Taper: 0.005 mm

Applications:

• Face grinding, Transverse grinding, Taper grinding, Plunge grinding, Angle grinding, Internal grinding
• Automobile components, Bearings, Rollers, Fasteners, Tool Room, Dies & Punches

Accessories:Internal Grinding Attachment, Balancing Stand with Mandrel, Steady Rest, Radius Truing Device, 4-Jaw Chuck, Magnetic Coolant Pump, Grinding Gauge

• Hydraulic cutting feed maintains constant cutting rate regardless of work piece cross section
• Hydraulic blade tensioning system and guides keep blade under constant load during cutting
• Automatic saw frame height adjustment and blade shut off after job completion
• Blade breakage sensor / motion detector providing automatic shut off
• Roller bearings with carbide tipped blade guides
• Motorized chip removal wire brush
• Optional Automatic Version (DCA): having PLC based control panel with:

• Hydraulic shuttle vice with 1500 mm roller table
• Multiple indexing with max. 400 mm single stroke
• Digital piece counter and Precise length counter with 0.2 mm accuracy
• Please use bimetal blades for optimal cutting output

Accuracy: For 100 mm diameter

• Cutting taper: 0.1 mm
• Cutting length: 0.2 mm

Application:

• High volume cutting of bars, rods, tubes with high productivity
• Layer and bundle cuts of large work piece dimensions
• Large profiles and solid materials

Accessories:Motorized Job Roller Stand, Automatic Chip Conveyor, Hydraulic Bundle Clamping, Variable Speed Drive, Digital Feed Rate Meter, Blade Tension Meter, Electrostatic Oil Filter, Floating Shuttle Vice for Uneven Bars, Bimetal blades

Description: All Geared Heavy-Duty Roll Turning Lathe

• Specialists in customizing roll turning lathes
• Machine is hand-scrapped for high accuracy and perfectly balanced to handle large rolls of 25-30 metric tons
• Graded Casting with flame hardened Guide ways

Specifications: (In mm unless specified otherwise)

• Bigger main motor and large bore sizes available, if required
• Machines up to 1, 000 mm Center Height and 10, 000 mm Distance Between Centers available

Accuracy: As per IS Standard 1878 (Part-II) / (Part- III)

• 0.02mm/800mm (diameter), taper of roundness and 0.03mm/300mm (length), for turning job when work piece is held on chuck/ through bore
• 0.025mm/300mm (diameter), concave of flat surface for facing job when work piece is held between centers

Applications:

• Across Iron & Steel, Metals industries to re-grind roll mills
• Roll turning operations in Sugar, Paper, Cement, Power and Heavy Engineering industries
• Useful in plastic and metal die-making

Accessories:Double Slotted Chuck, Grinding Attachment, Roller Steady Rest, Motorized Cross Slide, Taper Turning Attachment, Revolving Tailstock with inbuilt Chuck, Coolant System

Description:

• Fixed Column, built-in Rotary Indexing Table which also travels transversally
• Wide range of spindle speeds & gearbox feeds allow for high output with the use of high-speed steel and carbide tools
• Hardened & ground alloy steel spindle
• Facing Head coupled with main spindle facilitates large diameter boring and facing operations
• Auto Rapid Travel for Facing Slide for improved productivity
• Independent motors for Spindle & Motor with Centralized Pendant Control for easy operation
• Telescopic Steel Covers for Guide ways to prevent ingress from damaging the guide ways
• Turcite B-Lining on all guide ways for smooth operation
• Machine is provided with Boring Bar and Support, Five Limit Switches

• Bigger main motor available, if required
• Bigger Rotary Table available, if required

Accuracy: As per Grade-I limits of Dr. G. Schlesingers Acceptance Test

• Quality of bore attainable H-7
• Ovality in bore: 0.01mm
• Position accuracy of Rotary Table: 0.02mm

Application:

• Horizontal boring, drilling and surface milling
• Reaming, turning and facing using facing head slide
• Machining bores in gearboxes & machine bodies
• 30 taper boring for 100-300 mm diameter using Taper Boring Attachment
• Inch threading (5-128) and Metric threading (0.28-7.5) using Threading Attachment
• 360 vertical milling up to 600mm depth using Vertical Milling Attachment

Accessories:Digital Read Out, Threading Attachment, Vertical Milling Attachment, Taper Boring Attachment

Hydraulic movement of cutting arm, The arm lifts out of contact of the work piece in the forward stroke to prevent damage to the blade or work piece, Three speed cutting feed controlled by a lever allows to adjust speed according to the material, Auto lift of cutting arm after job completion.

• Description: Hydraulic Power Hacksaw Machine

• Hydraulic movement of cutting arm
• The arm lifts out of contact of the work piece in the forward stroke to prevent damage to the blade or work piece
• Three speed cutting feed controlled by a lever allows to adjust speed according to the material
• Auto lift of cutting arm after job completion
• Motorized Coolant System allows smooth cutting operation

• Accuracy: Accuracy: As per IS Standard 3405

  • Cutting taper: 0.1 mm/ 100 mm diameter
  • Axial play of saw carriage: 0.3 mm

  Application:

  • Cutting round/ square bars, tubes and pipes
  • Large profiles and solid materials

  Accessories:Adjustable Bar Rest, V-jaws for Bundle Clamping, Coolant System, Adjustable Material Stop, Machine Lamp

Specialists in customizing Plano Miller machines The machine bed is of box type casting with vibration free construction, The table is driven by Rack & Pinion. It has T-slots for clamping work pieces, Auto lubrication is provided for table and cross slide, Motorized vertical movement of cross slide.

• Description: Heavy Duty Plano Miller

• Specialists in customizing Plano Miller machines
• The machine bed is of box type casting with vibration free construction
• The table is driven by Rack & Pinion. It has T-slots for clamping work pieces
• Auto lubrication is provided for table and cross slide
• Motorized vertical movement of cross slide
• Milling Head swivels 45 for versatile operations
• AC Drive with Centralized Electric Control Panel

Accuracy: As per IS Standard 2877Parallelism of top surface of work piece to bearing surface by horizontal feed of rail head:

• 0.02mm/2000m length of work piece (lengthwise)
• 0.03mm/2000mm length of work piece (crosswise)

Application:

• First operation for horizontal, vertical and angular surfaces
• Edge Milling of plates in V, Double-V, J Grooving, Double-J, Beveling & Square Edge
• Grinding & Milling large components

Accessories:Grinding Attachment, Second Milling Head on Cross Slide, Side Milling Head, Universal Milling Head with 360 movement

• Description: Heavy Duty All Geared Shaping Machine

  • The table can move 600
  • The tool head also swivels 600
  • The casting of the column, ram, cross slide and table are of high grade C.I.

  Specifications: (In mm unless specified otherwise)

Accuracy: As per IS Standard 2310

• Parallelism of the guide for the table support to traverse movement of table is 0.03mm/300mm
• Working accuracy of the machine parallelism of 0.03mm/300mm

Application:

• Shaping of Grooves, Slots, Steps and Keyways
• Shaping inclined surfaces, beveled surfaces, dovetails
• Cutting of splines and gear teeth
• Irregular cutting and contour shaping

Accessories:

Auto tool lifting, Auto down feed, Keyway cutting attachment, Hydro-copying attachment

• Description: Double Ended Pedestal Grinder

  • Double Ended Pedestal Grinder (1 Fine + 1 Coarse)
  • Adjustable tool rests are provided to ensure maximum usage of grinding wheels
  • Ball bearings are provided for vibration-free performance
  • Dynamically balanced stamping and die cast rotor minimizes vibrations and ensures smooth running
  • Safety features such as wheel guard, adjustable tool rest (to prevent the tool from getting stuck between the wheel and rest) and wheel guard are provided as standard supply

  Specifications: (In mm unless specified otherwise)

Accuracy: As per IS Standard 2538

• True Run Out of Spindle Taper: 0.05 mm
• Axial slip of spindle: 0.1 mm

Applications:

• Forging Industries, Foundries and for heavy duty grinding jobs
• Grinding and sharpening cutting tools
• Can be used for dry as well as wet (optional) grinding

Accessories:Twist drill grinding attachment, coolant system, dust exhaust equipment

• Description:

  • Bimetal Blade of M-42 grade with variable tooth pitch
  • Positive Rake Angle Blade made of 4%-chrome-tempered steel
  • Tooth tips with high Cobalt and Molybdenum content are of 68-69 HRC hardness
  • These blades facilitate high cutting rates and longer lifetime
  • The blades ensure optimal wear resistance and highest possible dynamic load capacity

  Materials suitable to cut:

  • Structural Steels, Deep Drawing Steel, Machining Steel
  • Case Hardened Steel, Spring Steel, Tempered Steel
  • Low Alloy Hot Working Steel, Unalloyed Tool Steels
  • Nitriding Steel, High Alloyed Hot Working Steel
  • Cold Working Steels and High Speed Steels
  • Rust and Acid Resistant Light Steel
  • Cast Iron, Nickel Based Alloys, Copper, Aluminum, Brass

The column has a deep throat to enable a variety of parts to be machined The circular table is provided with T-slots, A taper hole in the center of the table is useful for reception of cantering mandrel while machining circular slotting work.Steel gear slide on multi-spline shafts. All shafts are carried on ball bearings.

• Highly versatile machine capable of performing complex operations
• Table has 3 nos. T-Slots, with a graduated scale to obtain exact angle up to 45
• Working pressure of the table lead screw is through pressure-thrust bearing
• The heavy knee is made as a box and rests on a vertical column equipped with thrust bearings
• Hardened & ground gears, arbors, spindle and shaft
• The vertical head can swivel 90

• Bigger motor available on request

Accuracy: As per IS Standard 2201Surface milling by automatic longitudinal movement and manual vertical displacement is

• 0.005mm/200mm on flat surface
• 0.01mm/200mm on perpendicular surface

Application:

• Machining flat surfaces, contoured surfaces, surfaces of revolution, external and internal threads, and helical surfaces, of various cross sections
• Face Milling, Perpendicular Milling, Slotting, Rack Cutting, Hobbing, Gear Cutting, Drilling, Boring

Accessories:Swivel Base Vice, Rotary Table, Collet Adaptor, Collets, Clamping Kit, Long Arbor, Stub Arbor, Digital Read Out

• he column has a deep throat to enable a variety of parts to be machined
• the circular table is provided with t-slots
• 360 direct indexing to accurately locate positions
• a taper hole in the center of the table is useful for reception of cantering mandrel while machining circular slotting work.
• steel gear slide on multi-spline shafts. All shafts are carried on ball bearings.

accuracy: as per is standard 2308

• perpendicularity of the ram movement to table surface in longitudinal direction 0.02mm/300mm
• perpendicularity of the ram movement to table surface in traverse direction 0.02mm/300mm

application:

• cutting slots, splines, keyway- internal and external
• machining internal and external gears, concave, circular, semi circular and convex surfaces, dies, punches
• shaping internal and external forms or profile
• internal machining of blind holes
• machining of shapes which are difficult produce on shaper

accessories:5 tilting head, auto feed for x & y axes, auto rotary feed, bellows, true chuck, 10 swivel head, coolant system

• Description: Pyramid type three roll plate bending and rolling machine

• Hydro-Mechanical operation with Fixed Bottom Rolls and Top Roll rotating by hydraulic system
• Electric Motor Brake and Independent Control Panel allows user to stop the machine at any point, thus allowing any shape in rolling
• Double gear box design (worm and spur reduction), prevents fatigue in motion and overload of motor even if the machine is bending at over capacity
• Housing is made from M.S. Plate of suitable strength and mounted on heavy base frame; Rolls are made from forged steel and perfectly machined for accurate result.

• Accuracy: As per IS Standard 14878

  Applications:

  • Fabrication of Pipes, Tanks, Pressure Vessels, Shipping Industry and Chimneys
  • Cylindrical, Right Angle and Conical Bending
• Accessories:Pre-bending, Conical Bending, Digital Readout, PLC Controller

Description: Universal Knee Type Milling Machine

• Highly versatile machine capable of performing complex operations
• Table has 3 nos. T-Slots, with a graduated scale to obtain exact angle up to 45
• Working pressure of the table lead screw is through pressure-thrust bearing
• The heavy knee is made as a box and rests on a vertical column equipped with thrust bearings
• Hardened & ground gears, arbors, spindle and shaft
• Heavy pair of braces holds the arbor and over arm to ensure accuracy under heaviest cut.

• Bigger motor available on request

Accuracy: As per IS Standard 2200Surface milling by automatic longitudinal movement and manual vertical displacement is:

• 0.005mm/200mm on flat surface
• 0.01mm/200mm on perpendicular surface

Application:

• Machining flat surfaces, contoured surfaces, surfaces of revolution, external and internal threads, helical surfaces, various cross sections
• Face Milling, Perpendicular Milling, Slotting, Rack Cutting, Hobbing, Gear Cutting, Drilling, Boring

Accessories:Vertical Milling Head, Universal Dividing Head, Swivel Base Vice, Rotary Table, Collet Adaptor, Collets, Slotting Attachment, Rack Cutting Attachment, Hobbing Attachment, Micro Boring Head, Clamping Kit, Long Arbor, Stub Arbor, Digital Read Out

• Description: Hydraulic Motorized H Frame Four Pillar Press

• All steel construction provides a sturdy frame for low vibration under heavy load
• Easy to operate. Machine can be stopped at any position.
• Safety valve to prevent overloading
• Adjustable table height for versatile operations
• The machine is equipped with Pressure Manometer and V blocks

Accuracy: As per IS Standard 14877

• Perpendicularity between vertical movement of slide and upper surface of bolster: 0.4 mm
• Parallelism of lower face of slide with respect to the upper face of bolster: 0.8 mm

Applications:

• Straightening bent fabricated bodies or sheets
• General Purpose Press for Repair Workshops
• Pressing of Ball Bearings
• Removal of Old Bushes And Mounting New Bushes

• Description:

• All geared Milling Head, made of high grade stress-relieved C.I.
• Change gear system provides a 6 step spindle speed range and reduces the weight of the head
• Since changing of the cutter is not frequent in a Plano miller (unlike a milling machine), it is convenient to change the spindle speed through change gear pairs
• Spindle is provided with P5 Class Taper Roller Bearings (Total 4) + 1 Cylindrical Roller Bearing for rigid support
• Drive though ground splines in the spindle
• Gears, spindle, quill etc made of case hardening steel
• Case hardened & ground helical bull gear and mating gears for high torque transmission
• Spindle bearings lubricated for life with molybdenum sulphide grease
• Self contained, cam operated automatic lubrication system for gear box

Accuracy:

• Spindle run-out on face, inner & out diameter: 0.01 mm

Application:

• Increasing productivity by conversion of Planer to Plano miller. Single point tool cutting can be replaced by high speed, multi-point cutting by carbide cutters
• Cutting load is taken over by Milling Head reducing the load and speed of the table, thereby improving productivity and increasing machine life

Accessories:Fixed Back Plate, Tilting Back Plate 45

Right angle attachment: In combination with cross feed and vertical feed, adds floor boring capabilities to your converted Plano miller. The right angle attachment can be set to any angle 360 allowing the user to machine all 4 sides of a rectangular job in the same setting

• Description:

  • Steel construction frame, fabricated from rolled steel plates with suitable cross ribbings. This reduces vibration under heavy load.
  • Crank shaft is made of special alloy steel machined to closed accuracy and fitted in bronze bushes for smooth working, longer life and accuracy. The gears are steel fabricated.
  • The high grade C.I. flywheel stores and releases sufficient power for pressing operation.
  • The heavy duty table and ram are also made of high grade C.I. They are perfectly aligned to obtain high precision pressing output.
  • The lubrication system allows smooth sliding surfaces and moving parts to increase the lifespan of the machine

  Specifications: (In mm unless specified otherwise)

Accuracy: As per IS Standard 8711

Application:

• Cutting, Bending, Punching, Embossing

Accessories:Inclination Arrangement