• Fixed Column, built-in Rotary Indexing Table which also travels transversally
• Wide range of spindle speeds & gearbox feeds allow for high output with the use of high-speed steel and carbide tools
• Hardened & ground alloy steel spindle
• Facing Head coupled with main spindle facilitates large diameter boring and facing operations
• Auto Rapid Travel for Facing Slide for improved productivity
• Independent motors for Spindle & Motor with Centralized Pendant Control for easy operation
• Telescopic Steel Covers for Guide ways to prevent ingress from damaging the guide ways
• Turcite B-Lining on all guide ways for smooth operation
• Machine is provided with Boring Bar and Support, Five Limit Switches
• Bigger main motor available, if required
• Bigger Rotary Table available, if required

Accuracy: As per Grade-I limits of Dr. G. Schlesingers Acceptance Test

• Quality of bore attainable H-7
• Ovality in bore: 0.01mm
• Position accuracy of Rotary Table: 0.02mm

Application:

• Horizontal boring, drilling and surface milling
• Reaming, turning and facing using facing head slide
• Machining bores in gearboxes & machine bodies
• 30 taper boring for 100-300 mm diameter using Taper Boring Attachment
• Inch threading (5-128) and Metric threading (0.28-7.5) using Threading Attachment
• 360 vertical milling up to 600mm depth using Vertical Milling Attachment

Accessories:Digital Read Out, Threading Attachment, Vertical Milling Attachment, Taper Boring Attachment

Introduction: Thermal Drilling Technology for Sheet Metal Drilling & Tapping

What is Thermal Drilling: Making Holes without Removing Material

• Drilling holes removes metal from the work piece
• If the metal is retained, the hole becomes stronger
• It can allow formation of a collar which can be tapped or used as a through hole for welded, soldered or brazen connections

Thermal Drilling Process:Formdrill tools are made from Tungsten Carbide. Their conical body has specially developed lobed geometry. Thermal drilling process is a method of making a hole and simultaneously producing a bush from the parent metal to give additional support as a bearing surface or for a thread.

Make a hole and form a bush in one operation.Frictional heat is generated by speed and pressure to form the material.Fast cycles(2-4 sec for M8-M10 holes

The completed bush gives additonal support as a bearing for a thread.Threads are produced by roll forming. No material is removed.Strong connection with no parts to break free improves joint connection.

Advantages of Thermal Drilling Process:

• Description: Heavy Duty Radial Drilling Machine

• Large base plate with broad column to withstand heavy load
• Column sleeve carrying arm rotates on ball bearing at top & bearing rollers at bottom
• Spindle is made of alloy steel. It moves on taper roller bearing
• Auto Feed 0.115 mm/rev is standard. Six Feed Range of 0.12- 1.2 mm/rev is optional
• Optional: Spindle Speed of 50-1600 RPM with Dual Speed Motor

Accuracy: As per IS Standard 2199

• Movement of drilling head parallel to base plate 0.015mm/ 1000mm of traverse
• True running of taper in spindle at top position 0.015mm

Application:

• Machining of large components in Workshops and Fabrication Shops
• Drilling, Tapping, Counter Boring, Reaming, Screwing, Thread Cutting and Counter Sinking
• Suitable for Steel, Cast Iron, Alloy Steel, Stainless Steel, Medium Carbon Steel, Non-Ferrous Material

Accessories:Box Table, Drill Vice, Machine Vice, Coolant System, Tapping Attachment

• Description:

  • Machines are made of High Grade Casting FG 260, IS 210
  • Spindles are Steel-Case, Hardened & Ground, making them very durable
  • Heavy weight machines which are highly vibration resistant even at peak loads
  • Components made on CNC machines, giving high accuracy and easy part interchangeability

  Specifications: (In mm unless specified otherwise)

• Bigger motor available on request

Accuracy: As per IS Standard 2425

Applications:

• High speed drilling and tapping
• Precision thread cutting & screw cutting
• Suitable for Steel, Cast Iron, Alloy Steel, Stainless Steel, Medium Carbon Steel, Non-Ferrous Material

Accessories: Drill Chuck, Drill Vice, Coolant System, Tapping Attachment

• Fixed Column, built-in Rotary Indexing Table which also travels transversally
• Wide range of spindle speeds & gearbox feeds allow for high output with the use of high-speed steel and carbide tools
• Hardened & ground alloy steel spindle
• Facing Head coupled with main spindle facilitates large diameter boring and facing operations
• Auto Rapid Travel for Facing Slide for improved productivity
• Independent motors for Spindle & Motor with Centralized Pendant Control for easy operation
• Telescopic Steel Covers for Guide ways to prevent ingress from damaging the guide ways
• Turcite B-Lining on all guide ways for smooth operation
• Machine is provided with Boring Bar and Support, Five Limit Switches
• Bigger main motor available, if required
• Bigger Rotary Table available, if required

Accuracy: As per Grade-I limits of Dr. G. Schlesingers Acceptance Test

• Quality of bore attainable H-7
• Ovality in bore: 0.01mm
• Position accuracy of Rotary Table: 0.02mm

Application:

• Horizontal boring, drilling and surface milling
• Reaming, turning and facing using facing head slide
• Machining bores in gearboxes & machine bodies
• 30 taper boring for 100-300 mm diameter using Taper Boring Attachment
• Inch threading (5-128) and Metric threading (0.28-7.5) using Threading Attachment
• 360 vertical milling up to 600mm depth using Vertical Milling Attachment

Accessories:Digital Read Out, Threading Attachment, Vertical Milling Attachment, Taper Boring Attachment

Introduction: Thermal Drilling Technology for Sheet Metal Drilling & Tapping

What is Thermal Drilling: Making Holes without Removing Material

• Drilling holes removes metal from the work piece
• If the metal is retained, the hole becomes stronger
• It can allow formation of a collar which can be tapped or used as a through hole for welded, soldered or brazen connections

Thermal Drilling Process:Formdrill tools are made from Tungsten Carbide. Their conical body has specially developed lobed geometry. Thermal drilling process is a method of making a hole and simultaneously producing a bush from the parent metal to give additional support as a bearing surface or for a thread.

Make a hole and form a bush in one operation.Frictional heat is generated by speed and pressure to form the material.Fast cycles(2-4 sec for M8-M10 holes

The completed bush gives additonal support as a bearing for a thread.Threads are produced by roll forming. No material is removed.Strong connection with no parts to break free improves joint connection.

Advantages of Thermal Drilling Process:

• Description: Heavy Duty Radial Drilling Machine

• Large base plate with broad column to withstand heavy load
• Column sleeve carrying arm rotates on ball bearing at top & bearing rollers at bottom
• Spindle is made of alloy steel. It moves on taper roller bearing
• Auto Feed 0.115 mm/rev is standard. Six Feed Range of 0.12- 1.2 mm/rev is optional
• Optional: Spindle Speed of 50-1600 RPM with Dual Speed Motor

Accuracy: As per IS Standard 2199

• Movement of drilling head parallel to base plate 0.015mm/ 1000mm of traverse
• True running of taper in spindle at top position 0.015mm

Application:

• Machining of large components in Workshops and Fabrication Shops
• Drilling, Tapping, Counter Boring, Reaming, Screwing, Thread Cutting and Counter Sinking
• Suitable for Steel, Cast Iron, Alloy Steel, Stainless Steel, Medium Carbon Steel, Non-Ferrous Material

Accessories:Box Table, Drill Vice, Machine Vice, Coolant System, Tapping Attachment

• Description:

  • Machines are made of High Grade Casting FG 260, IS 210
  • Spindles are Steel-Case, Hardened & Ground, making them very durable
  • Heavy weight machines which are highly vibration resistant even at peak loads
  • Components made on CNC machines, giving high accuracy and easy part interchangeability

  Specifications: (In mm unless specified otherwise)

• Bigger motor available on request

Accuracy: As per IS Standard 2425

Applications:

• High speed drilling and tapping
• Precision thread cutting & screw cutting
• Suitable for Steel, Cast Iron, Alloy Steel, Stainless Steel, Medium Carbon Steel, Non-Ferrous Material

Accessories: Drill Chuck, Drill Vice, Coolant System, Tapping Attachment