Our Products
Router, Cables & Networking Devices
1 Products availableLimit Controller
1 Products availableTransducer
1 Products availableLeading Manufacturer, Supplier & Retailer of Distribution Transformer Meter, Digital Panel Energy Meter, single phase electronic meter, three phase electronic meter and LT/HT CT/PT Operated Energy Meter.
We are one of the well-known Suppliers of Distribution Transformer Meter in Mumbai. Distribution Transformer Meter offers revenue protection features for consumer tariff applications including anomaly detection. Distribution Transformer Meter is a composite unit operating over a current range from 40-200A through built-in CTs. Distribution Transformer Meter is a composite metering unit specially designed for Low Tension Current Transformer (LTCT) segment. Distribution Transformer Meter offers load profiling and anomaly detection for consumer tariff applications and energy audit. Distribution Transformer Meter is suitable for distribution transformer (DT), industrial and commercial metering segments. Features and Benefits of Distribution Transformer Meter
Technical Specifications
Electrical | |
---|---|
Connection type | Direct connected |
Wiring configuration | 3 phase 4 wire |
Voltage range | 240 V/230 V (P-N) |
Current range | 40 - 200 A |
Accuracy | Class 1.0 |
Main frequency | 50 Hz ±5% |
Burden | As per standards |
Insulation class | 4 kV RMS 50 Hz |
Impulse withstand | 6 kV |
Approvals | |
Standards compliance | IS13779, IEC62053-21, IEC62052-11 |
Mechanical | |
Dimensions (WXH) | 273 x 365 x 199 mm (approx.) |
Weight | 4.5 kg |
Enclosure | Double insulated glass-filled polycarbonate |
Terminals | Thread through design suitable up to 200 A current |
Environmental | |
Ingress protection | IP 54 |
Temperature | -10 °C to +55 °C (operating) | -25 °C to +70 °C (storage) |
Humidity | 95% non-condensing |
Features | |
Tariff rates | Up to 8 zones |
MD energy type | Up to 2 |
Load survey | 400 parameter days with 30 minute integration period |
Communication | PACT port, optional RS232, RS485 Modbus |
Our company is one of the reliable Suppliers of Digital Panel Energy Meter in Mumbai. Digital Panel Energy Meter is a 96x96 digital polyphase panel meter to measure power and energy parameters. Digital Panel Energy Meter is an ideal replacement for analogue voltmeters, ammeters and energy meters. Digital Panel Energy Meter has pulse output and other advanced features for use in control panels, relay panels and building management systems (BMS). Features and Benefits of Digital Panel Energy Meter
Technical Specifications
Electrical | |
---|---|
Connection type | CT operated, CT / PT operated |
Wiring configuration | LT (3P4W), HT (3P3W, 3P4W) |
Voltage range | LT: 240V (L-N) 415V (L-L) HT: 63.5V (L-N), 110V (L-L) |
Current range | 1-1.2A (Starting :1mA);5-6A(Starting: 5mA) |
Overload | Confirms class of accuracy up to 120%Ib continuous Withstand up to 130% Imax continuous | 20 X Imax for 0.5 sec |
Accuracy | Class 0.5s,1.0 |
Main frequency | 50Hz ± 5% |
Burden | Voltage circuit- <1.5W, <1VA Current circuit- <0.5VA |
Approvals | |
Standards | IS14697, IS13779 IEC 62052-11, IEC 62053-21, 22, 23 |
Mechanical | |
Dimensions (WXH) | 96 x 96 mm |
Cut out size | 92 x 92 mm |
Depth behind bezel | 84mm |
Weight | 650gms |
Enclosure | Extruded aluminium |
Terminals | Combicon connector |
Max conductor size | 2 2.5 mm2 |
Environmental | |
Ingress protection | IP 50 (Front face) |
Dielectric strength | 1. Isolation: 2kV RMS, 50Hz | 2. Impulse withstand: 6kV |
Temperature | -10 oC to +55 oC (operating) | -25 oC to +70 oC (storage) |
Humidity | 95% non-condensing |
Features | |
Favourite page | Configurable through keypad |
CT/VT primary | Programmable through keypad |
Communication | PACT port |
Pulse output | Voltage rating : 240 V | Current rating : 100 mA DC max Parameter : Configurable | Extra pulse output : On request |
Display | Customised LCD display |
Our company is a reliable Supplier of Single Phase Electronic Meters in Mumbai. Single Phase Electronic Meter meets the present day need of utilities for an accurate, reliable and cost effective electronic meter for single phase consumers. Single Phase Electronic Meter provides an affordable solution in a dynamic market through comprehensive and advanced functionalities. Single Phase Electronic Meter features intelligent revenue protection facilities for installations where tampering is prevalent. Benefits of Single Phase Electronic Meter
Features of Single Phase Electronic Meter
Technical Specifications
Electrical | |
---|---|
Connection type | Direct connected |
Wiring configuration | 1 phase 2 wire |
Voltage range | 230/ 240 V (P-N), -40% to +30% |
Current range | 5-30 A, 10-60 A, 10-100 A |
Metrological accuracy | Class 1.0 |
Mains Frequency | 50 Hz ± 5 % |
Burden (voltage inputs) | As per relevant standards |
Burden (current inputs) | As per relevant standards |
Compliance | |
Standard | IS 13779, CBIP 88, IEC 62052-11, IEC 62053-21 |
Mechanical | |
Dimensions (WxHxD) | 135x168x68 mm |
Weight | 600 gms (Approx) |
Enclosure | Engineering plastic |
Sealing | Sealing screw provision |
Environmental | |
Ingress protection | IP 51 |
Insulation class | As per IS 13779 |
Impulse withstand | As per IS 13779 |
Temperature | -10 oC to +60 oC (operating) | -20 oC +80 oC (storage) |
Humidity | 95 % non-condensing |
Programming and Features | |
Tariff Rates | Up to 4 |
MDs | Up to 2 types, configurable in 4 registers |
Load Survey | Minimum 35 parameter days with 30 mins Integration Period |
Communications | Optical 1107 port for local and remote |
We are one of the reliable Suppliers of Three Phase Electronic Meter in Mumbai. The Three Phase Electronic Meter provided by our company offers a unique approach to energy metering and data collection for domestic, commercial and industrial metering. Three Phase Electronic Meter is a cost effective solution for direct current metering applications. Three Phase Electronic Meter is provided with Time of Use (TOU) registration, MD recording, load survey profiling and advanced tamper detection features. Features and Benefits of Three Phase Electronic Meter
Technical Specifications
Electrical | |
---|---|
Connection type | Direct connected |
Wiring configuration | 3 phase 4 wire |
Voltage range | 240 V/230 V (P-N), 415/400 V (P-P) |
Current range | 5 - 30 A, 10-40 A,10-60 A, 20-100 A |
Accuracy | Class 1.0, 2.0 |
Mains Frequency | 50 Hz ±5% |
Burden | As per relevant standards |
Compliance | |
Standards compliance | IS13779, CBIP88, IEC62052-11, IEC62053-21 |
Mechanical | |
Dimensions (WxHxD) | 175 x 250 x 73 mm |
Weight | 2.1 kg (approx.) |
Enclosure | Engineering plastic |
Sealing | Sealing screw provision |
Environmental | |
Ingress protection | IP 51 |
Insulation class | As per IS13779 |
Impulse withstand | As per IS13779 |
Temperature | -10 oC to +55 oC (operating) | -25 oC +70 oC (storage) |
Humidity | 95 % non-condensing |
Programming and Features | |
Tariff Rates | Up to 8 zones |
MDs | Up to 2 types, configurable in 8 registers |
Load Survey | Minimum 200 parameter days with 30 minute integration period |
Communications | PACT port, optional RS232 (RJ11 port) |
Our company is one of the well-known Suppliers of LT/HT CT/PT Operated Energy Meter in Mumbai. LT/HT CT/PT Operated Energy Meter is a cost effective solution for low tension current transformers (LT CT) and CT/PT metering applications. The features of LT/HT CT/PT Operated Energy Meter include load profiling, time of use and maximum demand recording, and event detection and logging. LT/HT CT/PT Operated Energy Meter is equipped with optical communication port for local meter reading and optional RS232/ RS485 port for AMR. LT/HT CT/PT Operated Energy Meter is a high precision metering solution for LT, CT and CT/PT metering installations. LT/HT CT/PT Operated Energy Meter offers various features suitable for load analysis and energy audit applications. Features and Benefits of LT/HT CT/PT Operated Energy Meter
LT/HT CT/PT Operated Energy Meter
Electrical | LT | HT |
---|---|---|
Connection type | CT operated | CT/PT operated |
Wiring configuration | 3 phase 4 wire | 3 phase 3 wire, 3 phase 4 wire |
Voltage range | 240 V/230 V (P-N) | 110 V (P-P), 63.5 V (P-N) |
Current range | 5 - 10 A | 1 - 2 A, 5 - 10 A |
Accuracy | Class 0.5s, 1.0s | Class 0.2s, 0.5s |
Main frequency | 50 Hz ±5% | 50 Hz ±5% |
Burden | As per standards | As per standards |
Insulation class | Protective class II | Protective class II |
Impulse withstand | 6 kV | 6 kV |
Approvals | ||
Standards compliance | IS14697, IS13779, IEC62052-11 IEC62053-21, IEC62053-22, CBIP 88 |
IS14697, IEC62052-11 IEC62053-22, CBIP 88 |
Mechanical | ||
Dimensions (WXHXD) | 175 x 250 x 77 mm (standard module) 175 x 301 x 77 mm (communication module) |
175 x 250 x 77 mm (standard module) 175 x 301 x 77 mm (communication module) |
Weight | 1.8 ±0.1 kg (standard module) 2.0 ±0.1 kg (communication module) |
1.8 ±0.1 kg (standard module) 2.0 ±0.1 kg (communication module) |
Enclosure | Engineering plastic | Engineering plastic |
Terminals | Nickel plated brass terminals with two screws per conductor | Nickel plated brass terminals with two screws per conductor |
Environmental | ||
Ingress protection | IP 51 | IP 51 |
Temperature | -10 oC to +55 oC (operating) -25 oC to +70 oC (storage) |
-10 oC to +55 oC (operating) -25 oC to +70 oC (storage) |
Humidity | 95% non-condensing | 95% non-condensing |
Features | ||
Tariff rates | Up to 8 | Up to 8 |
MD energy type | Up to 5 | Up to 5 |
Load survey | 400 parameter days with 30 min IP Option for 15/30/60 minutes integration period | 400 parameter days with 30 min IP Option for 15/30/60 minutes integration period |
Communication | PACT port, optional RS232/RS485/RS485 Modbus | PACT port, optional RS232/RS485/RS485 Modbus |
Our company is one of the major Suppliers of Prepayment Meter in Mumbai. Prepayment Meter 1P, a single phase prepayment meter offers a flexible and secure revenue management system to deliver a bill-less revenue cycle. Prepayment Meter provides convenient payment options to the consumer and eliminates all the hassles associated with a post paid system. Prepayment Meter prepayment metering system is designed to suit customized requirements and consumer acceptance. Benefits and features of Prepayment Meter
Technical Specifications
Electrical | |
---|---|
Connection type | Direct connected |
Wiring configuration | 1 phase 2 wire |
Voltage range | 230/ 240 V (P-N), -30% to +30% |
Current range | 5(30)A, 10(60)A, 20(80)A |
Metrological accuracy | Class 1.0 |
Mains frequency | 50 Hz ± 5 % |
Burden | As per relevant standards |
Approvals | |
Standards compliance | IS 13779, CBIP 88, IEC 62052-11, IEC 62053-21 |
Time Clock & Calendar | |
Normal power source | Mains supply |
RTC backup source | Lithium Battery |
Battery life (typical) | 10 years |
Min shelf life (typical) | 3 years |
Mechanical | |
Dimensions (WxHxD) | 125x193x48 mm |
Enclosure | Engineering plastic |
Sealing | Sealing screw provision |
Environmental | |
Temperature | -10 oC to +50 oC (operating) | -25 oC to +70 oC (storage) |
Humidity | Upto to 95 % non-condensing |
Ingress protection | IP 51 |
Insulation class | As per IS 13779 |
Impulse withstand | As per IS 13779 |
Programming and Features | |
Tariff rates | 8 rate registers |
Data retention | 10 years (minimum) |
Communications | Optical port |
Our company is one of the major Suppliers of Apex Meter in Mumbai. Apex Meter is a true four quadrant import and export metering system. Apex Meter facilitates Availability Based Tariff (ABT) implementation. Apex Meter metering system has been specially designed to provide online monitoring as well as local and remote on-demand meter reading. Apex Meter comes in single and four meter rack variants. Apex Meter offers utilities a complete grid metering solution with Availability Based Tariff (ABT) metering, interface to modern communication technologies and software integration. True four quadrant metering with modular rack design and error compensation makes Apex Meter a flexible, easy to use and accurate system. Benefits and Features of Apex Meter
Technical Specifications
Electrical | |
---|---|
Accuracy Class | 0.2s |
Connection type | CT/PT operated |
Measuring element | 3P3W, 3P4W |
Voltage input | 63.5 V (P-N), 110V (P-P) |
Current rating | 1-1.2 A, 5-6 A |
Mains frequency | 50 Hz ±5% |
Burden | As per relevant standards |
Metrology indicator | LED - per metering module, keypad configurable |
Approvals | |
Standards compliance | IEC62053-22, CBIP88, IS14697 |
Mechanical | |
Dimensions (WxHxD) 19” Rack Single meter rack |
436 x 132 x 260 mm (approx.) 253 x 132 x 260 mm (approx.) |
Enclosure | Anodised aluminium |
Sealing | Sealing screws on meter front |
Environmental | |
Temperature | -20 oC to +55 oC (operating) |
Humidity | 95% non-condensing |
Features | |
Auxiliary supply* | 110 V/240 V AC, 24/30/48/110/220 V DC |
Display type | 80 character, alphanumeric LCD with backlit and keypad |
Pulse output Type Voltage rating Current rating Pulse width |
Each metering module supports up to 4 pulse outputs Volt free contact 240 V AC 100 mA 80 ms] |
Communication Local reading On-demand remote reading Online monitoring |
Front optical port on each meter module RS 232 port on rack Optical port on rack |