PARIDA ENGINEERING

Sailashree Vihar, Bhubaneswar, Odisha

With us, one can stay assured about the security of their payments as we follow safe and secure online and offline payment modes. We facilitate our patrons with the methods like bank deposits, cash, electronic funds transfer and various others. The offered lot is in complete compliance with the industry standards thus, high in demand.

LEDs have many advantages over incandescent light sources, including lower energy consumption, longer lifetime, improved physical robustness, smaller size, and faster switching. They are also significantly more energy efficient and have fewer environmental concerns linked to their disposal.

Aphotovoltaic(PV) module is a packaged; connect assembly of typically 6x10 photovoltaicsolar cells. Photovoltaic modules constitute the photovoltaic array of aphotovoltaic systemthat generates and suppliessolar electricityin commercial and residential applications. Each module is rated by itsDCoutput power under standard test conditions (STC), and typically ranges from 100 to 365Watts (W). Theefficiencyof a module determines the area of a module given the same rated output an 8% efficient 230 W module will have twice the area of a 16% efficient 230 W module. A single solar module can produce only a limited amount of power; most installations contain multiple modules. A photovoltaic system typically includes an array of photovoltaic modules, aninverter, abattery packfor storage, interconnection wiring, and optionally asolar trackingmechanism.
The majority of modules usecrystalline silicon cells orthin film cell. Cells must also be protected from mechanical damage and moisture. The cells must be connected electrically in series, one to another. Externally, most of photovoltaic modules useMC4 connectorstype to facilitate easy weather proof connections to the rest of the system.
Modules electrical connections are madein seriesto achieve a desired output voltage and/orin parallelto provide a desired current capability. The conducting wires that take the current off the modules may contain silver, copper or other non-magnetic conductive transition metals. Bypassdiodesmay be incorporated or used externally, in case of partial module shading, to maximize the output of module sections still illuminated.

Now procure Solar Street Light at extremely reasonable prices from us. Our organization is its famous supplier. Keeping in compliance with the international standards, we ensure that the raw materials used for varied products are 100% certified and quality approved. This helps us in maintaining a set standard of our products.

A standalone solar photovoltaic street lighting system is an outdoor lighting unit used for illuminating a street or an open area. Recent advances in LED lighting have brought very promising opportunities for application in street lighting. Combining LEDs low power, high illumination characteristics with current photovoltaic (PV) technology, PV powered street light utilizing LED has become a norm in many places. In todays application, most of the common High Intensity Discharge (HID) lamps, often High Pressure Sodium (HPS) lamps are being replaced by more low powered Light Emitting Diode (LED) lamps.

A basic solar powered LED street light system components are :

• Solar Panel or Photovoltaic Module
• Lighting Fixture LED lamp set
• Rechargeable Deep Cycle Battery
• Solar Charge Controller
• Light Pole

The Solar Panel will provide electricity to charge the battery during day time. The batterys charging is controlled by a charge controller. The operation of the LED bulb is controlled by a control circuit either by using sensors such as Light Dependent Resistor (LDR) or voltage or current sensor. All these components will be fixed on a pole as shown in Figure 1 below. The solar panel is mounted at the top of the pole to minimize the possibility of any shading on the panels.

Defining of packages :The packages have been defined based on the power consumption of lamps. The package will be selected based on the nature and size of the road for which the solar street light system is being designed.

Our team professionals and experts ensure that the transactions done are exactly as per the guidelines. We maintain stern records of all the transactions done to gain complete satisfaction of our clients. We have hired a team of professionals who work in complete adherence with the industry norms to deliver the best quality products to our valued patrons.

Features :

• Advanced technology
• Precision engineered
• Long power backup

Solar panels are one of the important and most promising renewable energy technologies in India for energizing solar based application such as heating, desalination, cooking, cooling and power generation system. As there is tremendous availability of sunshine throughout the year. For ambitious, smart urban cities program solar PV based technology is prime, an ideal choice for power generation. In all these solar based application, the amount of solar radiation plays an important role which is mainly affected by tilt and azimuth angle of location. So in order to have maximized annual average incident solar energy on the surface of PV system, it is required to determine optimal tilt angle. Optimization of tilt angle ensures the maximum energy generation, thereby reducing the cost of power generation. The simulated result shows that the majority of average solar radiation is above 5kWh/m2/d and falls in the range of 5-6.5kWh/m2/d. The yearly optimal angles obtained are having variation of +2 to +3 from the latitude of the location.

Making sure your home solar electric or photovoltaic (PV) system is sized, sited, installed, and maintained correctly is essential for maximizing its energy performance. When installing a PV system, consider:

• How much sun you have (solar resource)
• How big the system needs to be to meet your electricity needs
• Where the system will be located and how much room it needs (system sitting)
• Whether you want your system to be connected to the grid or not
• What needs to be done to ensure that the system is safe?
• As with any mechanical or electrical appliance, PV systems require routine, periodic maintenance. System components may also need repair or replacement from time to time.
• An efficient and long-lasting system will depend on a periodic check of system components and completion of any preventive maintenance as necessary. Talk with your system installer about routine and periodic maintenance. In the event of a system malfunction, effective troubleshooting and repair is necessary.

Ours is a professionally managed firm and understand the importance of regular repairing and negative factors that impact your system. Keeping this in mind, we are providing solar panel repairing services to our worthy patrons in the country. We are operating from Bhubaneswar (Odisha, India). We are supported by a team of professionals having in-depth knowledge and expertise in this arena. With our services, we inspect the solar panel, diagnose the faulty parts, prepare a list of malfunctioning items and after getting approval from the clients, we execute the undertaken repairing operations.

FPC (Flat Plate Collectors) system: These are metallic type systems and have a longer life.

Technical Requirements

• Flat Plate Collectors : ISI mark (2 sq. m. absorber area for 100 liter tank capacity system in colder region and 125 liter for other regions)

ETC (Evacuated Tube Collectors) system: These systems are made up of glass and are fragile.

Technical Requirements Evacuated Tube Collectors/ Heat pipes Type of tubes 3 layer solar selective (Inner layer of copper coating should be visible). Detailed specifications of tubes will be as per the guidelines laid down by MNRE for empanelment of manufacturers of ETC based systems.

Inner tank material:SS 304 or 316 grade min/ MS or any other material with anticorrosive coating for hard water with chlorine contents.

Outer cladding & Frames:Al/SS/FRP or GI powder coated. MS may also be used with special anti-corrosive protective coatings.

Salient Features:

• 5 Years tank replacement guarantee.
• Compact and sleek design of the system adds to the aesthetics.
• Specially insulated storage tank retains hot water for considerable amount of time, with minimal temp drop at night and suitable for hard water.
• Corrosion resistance aluminum alloy stand for longer life in SS system.
• Triple layer evacuated tube technology for rapid water heating.
• Easy installation and maintenance features make the system suitable for varied projects, right from individual bungalows, row house, multistoried apartments to large townships and swimming pools.

Both these type of water heaters come with or without pump. Pump is used to move water from collectors to the storage tank. Those without pump use thermo siphon principle to move water from collectors to storage tank automatically.

We make available Solar Lanterns which are easy-to-operate and have the long service life.There are many places in the country that receive electricity only for a few hours in a day, and then there are some that do not get electricity at all. In many parts of the country, kerosene is still used as fuel to generate light during emergency. Burning of kerosene not only causes air pollution but also has potential to cause a lot of disastrous health effects. In recent years many innovators have come out withsolarpowered-LED based emergency lighting solutions that provide a great alternative to the old form of emergency lighting.

Are you in search of a trustworthy name providing solutions for Solar Water Heater Installation? If the answer is yes, then you have come to the right place. Operating from Bhubaneswar (Odisha, India), we have all the arrangements necessary for the installation of the solar water treatment plant. Our professionals work in coordination with clients and make sure that the provided solutions stand high on the counts of elevated service standards. For detailed information, one can reach us anytime through our official website.