Our Products
Gaskets
2 Products availableNatural And Synthetic Resin
2 Products availableIndustrial Plastic Pipes
1 Products availableValves & Valve Fittings
1 Products availablePVC, PP & Plastic Products
1 Products availableFashion Jewelry
1 Products availableBearings And Bearing Components
1 Products availableLeading Manufacturer, Supplier & Retailer of Acrylic Balls, Hollow Plastic Balls, Nylon Balls, PTFE Balls and Polypropylene Balls.
TYPICAL PROPERTIES OF ACRYLIC PMMA
PHYSICAL | ||
---|---|---|
ASTM or UL test | Property | Acrylic |
D792 | Density (lb/in3), (g/cm3) | 0.0433, 1.183 |
D570 | Water Absorption, 24 hrs (%) | 0.3 |
MECHANICAL | ||
D638 | Tensile Strength (psi) | 8,000-11,000 |
D638 | Tensile Modulus (psi) | 350,000-500,000 |
D638 | Tensile Elongation at Break (%) | 2 |
D790 | Flexural Strength (psi) | 12,000-17,000 |
D790 | Flexural Modulus (psi) | 350,000-500,000 |
D695 | Compressive Strength (psi) | 11,000-19,000 |
D695 | Compressive Modulus (psi) | - |
D785 | Hardness, Rockwell | M80-M100 |
D256 | IZOD Notched Impact (ft-lb/in) | 0.3 |
THERMAL | ||
D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./oF) | 5-9 |
D648 | Heat Deflection Temp (oF/oC) at 264 psi | 150-210/65-100 |
D3418 | Melting Temp (oF/oC) | -/- |
- | Max Operating Temp (oF/oC) | 150-200/65-93 |
C177 | Thermal Conductivity (BTU-in/ft2-hr-oF), (x 10-4 cal/cm-sec-oC) | 3.93, 1.23 |
UL94 | Flammability Rating | - |
ELECTRICAL | ||
D149 | Dielectric Strength (V/mil) short time, 1/8 inch thick | 400 |
D150 | Dielectric Constant at 60 Hz | 4.0 |
D150 | Dissipation Factor at 60 Hz | 0.05 |
OPTICAL | ||
- | Light Transmission, minimum (%) | 92 |
- | Refractive Index | 1.48-1.50 |
TYPICAL PROPERTIES OF TEFLONĀ® PTFE
PHYSICAL | ||
---|---|---|
ASTM or UL test | Property | PTFE (unfilled) |
D792 | Density (lb/in3), (g/cm3) | 0.0783, 2.163 |
D570 | Water Absorption, 24 hrs (%) | < 0.01 |
MECHANICAL | ||
D638 | Tensile Strength (psi) | 3,900 |
D638 | Tensile Modulus (psi) | 80,000 |
D638 | Tensile Elongation at Break (%) | 300 |
D790 | Flexural Strength (psi) | No Break |
D790 | Flexural Modulus (psi) | 72,000 |
D695 | Compressive Strength (psi) | 3,500 |
D695 | Compressive Modulus (psi) | 70,000 |
D785 | Hardness, Shore D | D50 |
D256 | IZOD Notched Impact (ft-lb/in) | 3.5 |
THERMAL | ||
D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./oF) | 7.5 |
D648 | Heat Deflection Temp (oF/oC) at 264 psi | 132/55 |
D3418 | Melting Temp (oF/oC) | 635/335 |
- | Max Operating Temp (oF/oC) | 500/260 |
C177 | Thermal Conductivity (BTU-in/ft2-hr-oF), (x 10-4 cal/cm-sec-oC) | 1.703, 5.863 |
UL94 | Flammability Rating | V-O |
ELECTRICAL | ||
D149 | Dielectric Strength (V/mil) short time, 1/8 ?? thick | 285 |
D150 | Dielectric Constant at 1 MHz | 2.1 |
D150 | Dissipation Factor at 1 M Hz | < 0.0002 |
D257 | Volume Resistivity (ohm-cm) at 50% RH | > 1018 |
TYPICAL PROPERTIES OF POLYPROPYLENE
PHYSICAL | ||
ASTM or UL test | Property | Homopolymer |
D792 | Density (lb/in3), (g/cm3) | 0.0333, 0.9053 |
D570 | Water Absorption, 24 hrs (%) | < 0.01 |
MECHANICAL | ||
D638 | Tensile Strength (psi) | 4,800 |
D638 | Tensile Modulus (psi) | 195,000 |
D638 | Tensile Elongation at Yield (%) | 12 |
D790 | Flexural Strength (psi) | 7,000 |
D790 | Flexural Modulus (psi) | 180,000 |
D695 | Compressive Strength (psi) | 7,000 |
D695 | Compressive Modulus (psi) | - |
D785 | Hardness, Rockwell | 92 |
D256 | IZOD Notched Impact (ft-lb/in) | 1.9 |
THERMAL | ||
D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./oF) | 6.2 |
D648 | Heat Deflection Temp (oF/oC), at 66 psi, at 264 psi | 210/99, 125/52 |
D3418 | Melting Temp (oF/oC) | 327/164 |
- | Max Operating Temp (oF/oC) | 180/82 |
C177 | Thermal Conductivity (BTU-in/ft2-hr-oF), (x 10-4 cal/cm-sec-oC) | 0.76-0.813, 2.6-2.83 |
UL94 | Flammability Rating | HB |
ELECTRICAL | ||
D149 | Dielectric Strength (V/mil) short time, 1/8 inch thick | 500-660 |
D150 | Dielectric Constant at 1 kHz | 2.25 |
D150 | Dissipation Factor at 1 kHz | 0.0005-0.0018 |
D257 | Volume Resistivity (ohm-cm) at 50% RH | 8.5 x 1014 |
D495 | Arc Resistance (sec) | 160 |
We feel proud to introduce ourselves as one of the overriding glass balls manufacturers and suppliers in India. We provide you superlative quality colored glass balls. Our glass balls are used in non-return valves, light-duty corrosion-resistant bearings, flowmeters and as insulators. Also available, 'Black Glass' balls with super precision tolerances in sizes from 1/16" to 1/4" diameter for use in medical and chemical flow- meters. Our decorative glass balls have excellent resistance to most chemicals except hydrofluoric acid. They are not suitable for applications involving thermal or mechanical shock. Mechanical Properties
Size Range
Tolerances
Corrosion ResistanceGlass balls have excellent resistance to most chemicals except hydrofluoric acid. They are not suitable for applications involving thermal or mechanical shock.
RATE DEPEND ON REQUIRED QTY AND SIZE.
We are a well recognized acetal delrin balls manufacturer and supplier in India. Our delrin plastic balls are very much popular in the market worldwide. With the help of our advanced integrated technology we are able to produce high quality delrin balls. GENERAL PROPERTIESAcetal is the common name for a family of thermoplastics with the chemical name PolyOxy-Methylene. Acetal provides high strength and stiffness, enhanced dimensional stability, and is easy to machine. As a semi-crystalline material, acetal is characterized by a low coefficient of friction and good wear properties. FEATURES
TYPICAL PROPERTIES OF ACETALS
PHYSICAL | ||
---|---|---|
ASTM or UL test | Property | Delrin® Homopolymer |
D792 | Density (lb/in3), (g/cm3) | 0.0513, 1.413 |
D570 | Water Absorption, 24 hrs (%) | 0.2 |
MECHANICAL | ||
D638 | Tensile Strength (psi) | 11,000 |
D638 | Tensile Modulus (psi) | 450,000 |
D638 | Tensile Elongation at Break (%) | 30 |
D790 | Flexural Strength (psi) | 13,000 |
D790 | Flexural Modulus (psi) | 450,000 |
D695 | Compressive Strength (psi) | 16,000 |
D695 | Compressive Modulus (psi) | 450,000 |
D785 | Hardness, Rockwell | M89-R122 |
D256 | IZOD Impact Notched (ft-lb/in) | 1.0 |
THERMAL | ||
D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./oF) | 4.70 |
D648 | Heat Deflection Temp (oF/oC) at 264 psi | 250/121 |
D3418 | Melting Temp (oF/oC) | 347/175 |
- | Max Operating Temp (oF/oC) | 180/82 |
C177 | Thermal Conductivity (BTU-in/ft2-hr-oF), (x 10-4 cal/cm-sec-oC) | 2.53, 8.63 |
UL94 | Flammability Rating | HB |
ELECTRICAL | ||
D149 | Dielectric Strength (V/mil) short time, 1/8 inch thick | 450 |
D150 | Dielectric Constant at 1 MHz | 3.7 |
D150 | Dissipation Factor at 1 MHz | 0.005 |
D257 | Volume Resistivity (ohm-cm) at 50% RH | 1015 |
TYPICAL PROPERTIES OF PVC
Physical | ||
---|---|---|
ASTM or UL test | Property | PVC |
D792 | Density (lb/in3), (g/cm3) | ? 0.0513, ? 1.413 |
D570 | Water Absorption, 24 hrs (%) | 0 |
Mechanical | ||
D638 | Tensile Strength (psi) | 7500 |
D638 | Tensile Modulus (psi) | 411000 |
D638 | Tensile Elongation at Break (%) | - |
D790 | Flexural Strength (psi) | 12800 |
D790 | Flexural Modulus (psi) | 481000 |
D785 | Hardness | 115 (Rockwell R) |
D256 | IZOD Notched Impact (ft-lb/in) | 1 |
Thermal | ||
D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./oF) | 6.1 |
D648 | Heat Deflection Temp (oF/oC) at 264 psi | 176/80 |
D3418 | Melting Temp (oF/oC) | n.a. |
- | Max Operating Temp (oF/oC) | 140/60 |
C177 | Thermal Conductivity (BTU-in/ft2-hr-oF), (x 10-4 cal/cm-sec-oC) | ? 0.903, ? 3.13 |
UL94 | Flammability Rating | V-O |
Electrical | ||
D149 | Dielectric Strength (V/mil) short time, 1/8 inch thick | 544 |
D150 | Dielectric Constant at 60 Hz | 3.2 |
D150 | Dissipation Factor at 60 Hz | 0.01 |
D257 | Volume Resistivity (ohm-cm) at 50% RH | 5.4 x 1015 |
Properties
Properties | Unit | Result |
---|---|---|
Operating temperature | oC | 125 |
Specific gravity | g/cm | 1.76 |
Tensile Strength(min) | Mpa | 5.7 |
Melting point | oC | 144 |
Melt index | g/10min | 6-10 |
Decomposition temperature | oC | 300 |
Elongation(min) | % | 300 |