Our Products
Fibermizer is the screening machine for the rejecthandling.itis used for reject handling in coarse screening where the amount of rejects are more in quantity and contains fiber flakes.
The paper stock enters tangentially into the machine into the feed chamber.The action between the rotor blades and defibrating ring bars creates mechanical shear which breaks down larger fiber flakes and bundles before they enters screening zone, due to reduction in size, fibers passes through the screen basket and leaves the machine as accept stock.the rejects from the screen basket are discharged continuously from the reject nozzle.
Due to differential pressure, portion of the rejects are recirculated back in the feed chamber again to reclaim maximum fiber
Refining is the back bone in stock preparation stage as well as paper making. Hence each every paper mill is trying to adopt latest technology in refining. PARASON CONFINER is a modified conical refiner designed to enhance the bonding ability of fibers with a minimized freeness drop and minimum decrease if fiber length with low energy consumption and easy maintenance.
CR | ||||
---|---|---|---|---|
MODEL | TPD | POWER (Kw) | MOTOR RPM (Kw) | |
25 | 10-15 | 37 | 980 | |
35 | 20-50 | 90 | 980 | |
45 | 50-100 | 200 | 980 | |
60 | 120-200 | 350 | 720 | |
75 | 200-250 | 400-500 | 600 | |
100 | 250-400 | 750 | 500 |
it is one typical last stage screen to handle last stage coarse screen. The reject sorter with special rotor is fitted with sweeping distributing blades of special hardened MOC. The rotor impels the stock fed in against the screen half, cleans the screen half, cleans the screen half and disaggergates the fiber bundle for better for sorting.
RSR | MOTOR RPM - 1450 | |
---|---|---|
MODEL | TPD | POWER(Kw) |
1 | 4--5 | 22 |
2 | 10--12 | 45 |
agitators are designed for all kind of fibers in chests, tanks and storage towers up to a consistency of 5% in the propeller area.
PAT | MOTOR RPM=980 | |
---|---|---|
MODEL | MOTOR RATING | RPM |
600 | 9-11 | 320-400 |
800 | 15-18.5 | 220-310 |
1000 | 22-30 | 180-260 |
1200 | 30-45 | 160-200 |
1300 | 45-55 | 165-200 |
1600 | 55-75 | 120-180-310 |
CD Basis weight Control System makes use of low frequency pulse adjusting dilution pump to feed white water in the same pressure condition. The dilution valves will respond to the signals from the dry end scanner.
In high basis weight areas the valves will open up further automatic, diluting the HeadBox stock in that zone. Oppositely, in low basis weight areas the valves will close a little automatic. Adjusting the location CD basis weight and improving the CD basis weight of the whole sheet.
Compact, Sturdy, Latest mechanism and most important the refiner plates bar design to suit specific application are special feature. TDR is the result of ACCUMULATED PRECISION making this machine so unique in the paper world. Parason has more than 2000 installation within a span of 15 years is direct indicator of its super performance.
The inclusion of splined shaft technology in Parason TDR, permits rotor movement with longer force resulting in uniform floating condition under stock pressure of 1 2 Kg/cm2. The use of unique and high technology of centrifugal casted martensitic stainless steel shaft sleeves offers maintenance free working for year and years.
TDR | ||||
---|---|---|---|---|
MODEL | TPD | POWER (Kw) | MOTOR RPM (Kw) | |
13 | 10-15 | 37 | 980 | |
17 | 15-40 | 110 | 980 | |
21 | 40-70 | 200 | 980 | |
22 | 40-80 | 250 | 980 | |
24 | 80-120 | 315 | 720 | |
26 | 120-150 | 350-400 | 720 | |
28 | 150-180 | 400-450 | 600 | |
30 | 180-200 | 400-500 | 600 | |
34 | 200-300 | 500-700 | 525 | |
38 | 200-450 | 600-900 | 500 |
Hi-Consistency pulper is connected with dilution pulper. The dilution pulper has a due function of separating the plastics and other foreign material as also dilute the high consistency for stock transfer for further processing. This pulp has 0 6-8 mm drilled screen plate with impeller rotating against the screen. The impact of impeller separates fiber from the rejects, hence working most efficiently for fiber recovery.
DLP | MOTOR RPM = 1470 | |
---|---|---|
MODEL | CAPACITY (M3) | POWER (Kw) |
7 | 0.5 | 25 |
9 | 1 | 45 |
12 | 2.3 | 55 |
13 | 3 | 75 |
12--15 | 4 | 75 |
15 | 4.5 | 90 |
15-18 | 6 | 132 |
High speed deflaker is needed for deflaking vergin pulp and various kinds of broker to obtain high quality product and better strength characteristics. With Parason Tri-Disc Deflaker fibre bundles and flakes are completely deflaked into individual fibres by hydro-dynamic shock waves created with high quality deflaker discs, which rotate at a high speed of 1500 to 3000 RPM.
The freeness of the stock is slightly increased, but deflaking contributes to the uniformity of sheets and substantially improves its strength & formation.
TDD-HOLE | MOTOR RPM=1500 | |
---|---|---|
MODEL | TPD | POWER (Kw) |
300 | 10-40 | 55-75 |
450 | 40-110 | 75-110 |
600 | 70-120 | 250-270 |
Provides maximum filtration surface area for a given floor space Clean Design Eliminates pockets and shelves where slime and stock could accumulate
Balanced Water Removal Water flows from individual disks through an internal manifold design core to maximum hydraulic capacity
The Inlet Box Design Uniform distribution of stock throughout the vat
Non-turbulent Flow Tapered or straight center shafts are to suit specific installation requirements
Broke Reduction:
Controlled Primary & Secondary arm reeling for reduction of broke especially at Tambour roll diameters
Continuous Break free Production:
Seamless & Smooth cyclic transition of reeling from Primary arm to Secondary arm & back to Primary through automated Reel Turn up controls
Ensure Winder optimum performance:
Trouble & break free subsequent winding performance
Vibrating Screen is designed for screening in lines for processing of chemical pulp, ground wood and waste paper where it is used mainly as an end part for final sorting of the reject from screening stages.
An advantage of this screen is its open design; the stock can be seen while being screened. Another advantage is that the screen eliminates possible clogging as it happens with the closed systems. Sorting screen is provided with bores or slots. Their dimensions depend on actual technological sorting requirements.
The vibrating screen can be anchored directly to a concrete floor or bolted to a steel frame. The vibrating screen itself consists of a tub that stands on anchor plates with springs. Those absorb the beats on the floor. The screen with a vibrator is located on four springs hitched to the tub. The vibrator is driven by an electric motor using a V-belt. There is a shower pipe hitched to the tub as well. When operating, the vibrator sets the screen in a vibrating motion. The motion is enabled by a shaft with eccentrics. The stock flows on a screen and, using the vibrating motion, the good stock goes through the screen into the tub, and the rest that cant pass through the screen is moved upwards into a reject trough.
The screen reject is washed by the shower pipe on the screening part.The water level under the screen is adjustable with a slide so that the screen self-cleaning process would start. The impurities outlet, the good stock outlet from the screen and its inlet on the screening part must be solved for each project separately depending on the screen location. These parts do not form a part of the screen. For safety reasons, the machine is equipped with a belt cover and eccentric cover
It is an Intergral part of ragger system whereby the ragger rope string is cut at regular interval
WSP | MOTOR RPM=980 | |
---|---|---|
MODEL | TPD | POWER(Kw) |
500 | 15-25 | 100-150 |
600 | 20-35 | 150-200 |
900 | 40-50 | 250-315 |
Horizontal Screen is designed for coarse screening at Pulp mill/Stock preparation stage and to work with waste papar/mill pulp.
HPS | MOTOR RPM - 1470 | |
---|---|---|
MODEL | CAPACITY(TPD) | POWER(KW) |
400 | 15-30 | 22-37 |
600 | 30-70 | 37-55 |
World class foundry and manufacturing facilities. Latest manufacturing machines like Laser, Wire cut, VTL, CNC Lathe, VMC.
Turbo Separator is a disc screen specially designed for coarse screening of primarily for pulp strainer with a high trash and flake consent like recycled paper
TS | TPD | POWER(KW) | MOTOR RPM |
---|---|---|---|
450 | 25-30 | 45 | 1470 |
650 | 55-60 | 55 | 1470 |
900 | 90-100 | 90 | 1470 |
1000 | 100-130 | 110 | 980 |
1200 | 150-180 | 180 | 980 |
Designed for gentle treatment of fiber at high consistency and temprature, ensure optimum development of fiber and dispersion of contaminants in microns. improves aesthetic look of paper.
Folded Thickner in compression to normal Thickeners provides a considerable larger filtration area. This can translate into smaller space requirement or higher capacity for specific floor space. The wire clothing is divided into sectors so that each section can be replaced without removing the drum/cylinder .
The stock suspension fed into cylinder through an inlet which evenly distributes the stock across the width of the thickener. The water passes through the wire mesh and the fiber mat is formed on the surface of the cylinder. Between the stock level in the vat and the surface of the drain water inside the cylinder, a hydrostatic pressure difference (Ah) is produced, which provides continuous filtration. The surface of the wire cloth cleaned by shower.
Disc Thickner works as a gravity filter and does not require any barometric legs for creating vacuum . it can be installed at lower elevation. Stock enters into the inlet chamber and directed in between two mesh covered disc. The level difference between feeding and filtrate chambers provides the necessary hydraulic pressure difference for a water / solid separation. water drains through the mash.
The rotation if disc has dual action. First, thickened stock is conveyed into the discharge chamber. Secondly, it creates' rolling effect' of the stock lump on the disc surface, producing a clearing action. The mesh of the discs is cleaned by spray nozzles pipes.
To lessen the contaminant load on Fiber Saver (PFS), the light rejects normally directed to Trommel Screen. Special heavy duty perforated drum with hole size ascending order and aided by suitable shower in side & out side allowing the recovery of fibers.
The coarse contaminants getting rejected and accepts returned to the Pulper.
TSR | MOTOR RPM=1500 | |
---|---|---|
MODEL | TPD | POWER(Kw) |
1 | 8--15 | 3.7 |
2 | 15--20 | 5.5 |
3 | 20--25 | 7.5 |
4 | 25--30 | 9.5 |
7 | 35--40 | 11 |
medium consistency screen with special design rotor is provided with both hole & slot. The special design rotor with fabricated & contoured foils generate lower positive pulse and higher negative pulse.
hence low energy consumption and higher purging effect to keep and basket clean.
dewatering screw which has both conical screw cone and pneumatically controlled counter pressure cone, ensures desired dewatering effect upto 12% consistency with flexibility of operation.
Centricleaners are designed to remove air, dirt, shives and specks from pulp stock efficiently and economically. it's smooth internal surface and small diameter ensure outstanding performance.
Efficient removal of contaminants like sand, glass, chips, pins etc. from the pulp stock.
Shredded stock Heated to 90-100oC in Heater Mixer with temperature control system. Steam nozzles provided throughout the length of Heater Mixer for uniform heating
Designed for efficient transportation of bulky contaminants like plastic and recovery fiber & water with minimum maintenance and maximum reliability.
Highly efficient removal of contaminants like Sand, Glass, Chips, Pins etc. from pulp stock.
MDC NON MOTORIZED | OPERATING CONSISTENCY - 3.0 - 3.5% | |
---|---|---|
MODEL | LPM | |
1 | 1000 | |
2 | 2000 | |
3 | 3000 | |
4 | 4000 | |
5 | 5000 | |
6 | 6000 |
For filtration of back water and white water as well as fiber recovery. reduce water consumption save fiber reduce effluent load.
Designed to avoid escaping of steam, thus reducing steam consumption and improve dispersing effect. Thickened stock is shredded uniformly to increase
surface area of pulp stock.
The purpose of de-inking is to remove the printing inks and other substances like stickies that might effect the paper making process or the final properties of the paper.
In a de-inking process the ink should be first detached from the fiber. Flotation technology with high efficiency provides high yield of fibers and simple handling with maximum operating reliability.