Low Consistency pulper is connected with Fiber Saver and basically the reject contaminants over the pulper screen plate is treated in fiber saver The Fiber Saver has due function of separating the plastics and other foreign material. The Fiber saver screen plate normally has the same perforation as that of pulper and the impeller rotating against the screen. The impact of impeller separates fiber from the rejects and before the heavy rejects dump it is throughly washed to recover good fiber hence working most efficiently for fiber recovery.

• Uncut contaminants from Low-consistency pulper are removed with negligible fiber loss.
• The Fiber saver works as continuous cleaning equipment for pulper and helps in throughput increase.
• Removal of large foreign contaminants eliminates risk of pulp jamming in successive operation.
• The contaminants discharge cycle can be operated through PLC based (Time control) panel.

For removal of spinning contaminants such as wires, rags, strings, plastics by means of ragger rope.

• Easy installation with horizontal and vertical type of pulper.
• Adjustable time relay for intervals and running time of the drive motor, the ragger's speed can be matched to the level of contaminants of the waste paper and the production rate required.
• Pneumatic loading and relieving of the loading rope.
• Ragger control panel is designed to
  • Loading and lifting of the roller in auto mode.
  • Speed control at 0-10RPM
  • Emergency stop
  • Visual indications of ragger motor 'ON' and air pressure.

• Innovative & Power Effective Impellers
• Improved Metallurgy
• Higher Life
• Hard Facing Techniques

Low Consistency pulper is connected with Fiber Saver and basically the reject contaminants over the pulper screen plate is treated in fiber saver The Fiber Saver has due function of separating the plastics and other foreign material. The Fiber saver screen plate normally has the same perforation as that of pulper and the impeller rotating against the screen. The impact of impeller separates fiber from the rejects and before the heavy rejects dump it is throughly washed to recover good fiber hence working most efficiently for fiber recovery.

• Uncut contaminants from Low-consistency pulper are removed with negligible fiber loss.
• The Fiber saver works as continuous cleaning equipment for pulper and helps in throughput increase.
• Removal of large foreign contaminants eliminates risk of pulp jamming in successive operation.
• The contaminants discharge cycle can be operated through PLC based (Time control) panel.

For removal of spinning contaminants such as wires, rags, strings, plastics by means of ragger rope.

• Easy installation with horizontal and vertical type of pulper.
• Adjustable time relay for intervals and running time of the drive motor, the ragger's speed can be matched to the level of contaminants of the waste paper and the production rate required.
• Pneumatic loading and relieving of the loading rope.
• Ragger control panel is designed to
  • Loading and lifting of the roller in auto mode.
  • Speed control at 0-10RPM
  • Emergency stop
  • Visual indications of ragger motor 'ON' and air pressure.

• Innovative & Power Effective Impellers
• Improved Metallurgy
• Higher Life
• Hard Facing Techniques