Our Products
Brake Parts
2 Products availableTextile Chemicals
2 Products availablePetrochemicals & Petroleum Products
1 Products availableEngine Components
1 Products availableRadiators & Radiator Accessories
1 Products availableWe are leaders in the market for providing best range of Water Displacing Rust Preventive Fluid, Pal Rustop 247 Mineral Oil Based Rust Preventive Fluid, Pal Rustnil L & H Mineral Oil Based Rust Preventive Fluid, Solvent Based Rust Preventive Fluid and Ultra Cool Coolant
PAL RUSTRANS- L & H
These are water displacing type corrosion & rust preventives. On application on wet metal surfaces, it displaces water and offers a soft film that can withstand subsequent handling and provide rust protection. PAL Rustrans - L leaves a residual, thin, soft, waxy like film on application and evaporation of solvent. PAL Rustrans - H offers a soft, tacky, oily film on application and evaporation of solvent. These can be easily applied by dipping, spraying or by brush. These are easily removable by wiping with cloth soaked in petroleum solvents. These products are formulated with film-forming ingredients, rust inhibitors and water displacing additives in solvent.
Applications
PAL Rustrans - L is widely used for temporary corrosion protection during storage and transportation. As a lubricant in mild metal pressing operations. Very effective for protection on steel tubes, wires, strips, bare sheeting’s, wheel rings, auto parts & machined components.
PAL Rustrans - H is widely used for protection on highly finished components e.g. cylinder liners, gears, die etc.
Characteristics
Properties | Pal Rustrans- L | Pal Rustrans - H |
---|---|---|
Appearance | Amber Fluid | |
Kinematic Viscosity, Cst @ 40ºc, Min. | 44260 | 44355 |
Flash Point, Min. Abel, ºc | 30 | 30 |
Film Forming Property | Passes | Passes |
Water Displacement Properties | Passes | Passes |
Coverage Sq. M/Ltr. | 100 | 35-45 |
Film Thickness | 3 Micron | 7-9 Micron |
Protection: Indoor Outdoor |
9 Months 2months |
9 Months 2 Months |
* The Specifications Are Subject To Variations/Development/Customization |
PAL RUSTOP - 247
Application
PAL RUSTOP – 247 is especially recommended as protective for all types of bearings, machine tools & components.
Characteristics
Properties | Pal Rustop- 247 |
---|---|
Appearance | Amber Clear Fluid |
Flash Point, Coc,ºc, Min.. | 40 |
Copper Strip Corrosion D130, 3 Hr At 100 ºc | 1 |
Water Displacement Test | Pass |
Coverage, Sq M / Litre | 75 |
* The Specifications Are Subject To Variations/Development/Customization. |
PAL RUSTNIL L & H
These are lubricant type corrosion & rust preventive. The protective film of these grades have lubricating properties besides preventing moist air coming into contact with metal surfaces. They can be applied by dipping, spraying, roller coating, flow coating, flushing or circulation. Since the protective film has lubricating properties, it is not necessary to be removed. However it is easily removable by wiping.
These oils are formulated with high quality base stocks and carefully selected additive system to ensure formation of soft oily film over the metal surfaces and protection against rusting.
Application
Characteristics
Properties | Pal Rustnil- L | Pal Rustnil- H |
---|---|---|
Appearance | Amber Clear Fluid | |
Kinematic Viscosity, Cst@40ºc, | 44481 | 20-25 |
Flash Point, Coc, ºc, Min. | 70 | 150 |
Pour Point, ºc, Max. | -3 | -6 |
Protection: Indoor Outdoor |
4 Months 1 Month |
6 Months 1 Month |
* The Specifications Are Subject To Variations/Development/Customization. |
PAL RUSTOP
These are water displacing type rust & corrosion preventives. These form soft film, solvent deposited & can be applied directly to the wet metal surfaces where they form a protective film after the displacement of water.
PAL RUSTOP 910, 920, 930, 940 are based on blends of film forming materials, corrosion inhibitors to enhance the performance in salt spray & humidity cabinet tests. These are also incorporated with special type of wetting agents which will adhere to the parts.
The protective films of these grades can be removed by wiping off with rags or waste soaked in kerosene / mineral turpentine oils or by alkaline degreasents.
Application
PAL RUSTOP 910 is especially recommended for protection during storage of machine tools & components.
PAL RUSTOP 920 has a wide application for protection of components with high degree of finish, in machine shops & heavy machinery & plant manufacturing e.g. machinery tools, fasteners, metal strips etc. Because of its excellence performance in salt spray & humidity cabinet, it can be applied on components to be freighted by sea.
PAL RUSTOP 930 is recommended for the protection of components like machine tools, fasteners etc.
PAL RUSTOP 940 is recommended for the protection of components which are wrapped in paper especially fasteners etc.
Characteristics
Properties | Pal Rustop 910 | Pal Rustop 920 | Pal Rustop 930 | Pal Rustop 940 |
---|---|---|---|---|
Appearance | Amber Clear Fluid | |||
Flash Point ºc, Min. | 45 | |||
Protection: Indoor Outdoor |
6 Months 1 Month |
9 Months 2 Months |
6 Months 1 Month |
1 Month |
Film Thickness Microns | 44291 | 44386 | 44322 | 44292 |
Salt Spray Test | 24 Hrs. | 60 Hrs. | 48 Hrs. | 15 Hrs. |
Dewatering Test | Time 120 Second Or Below Passes The Test – Pass | |||
De-Emulsification Test | Time 60 Minutes Or Below Passes The Test - Pass | |||
* The Specifications Are Subject To Variations/Development/Customization. |
PALKNIT -22, 32
These are non - corrosive, easily washable, non-abrasive knitting oils which are self emulsifiable in water and provide high level of scour ability from knitted yarns or fabrics.
Formulated by using high quality of mineral oils & fortified with selected additives so as to provide good anti-wear, antirust antistatic & anti oxidant properties.
Recommended as non - staining type needle lubricants for large diameter circular knitting machines as well as for various other types of knitting machines & are suitable for automatic oiling units commonly fixed to circular knitting machines or by manual oiling methods. These are recommended for knitting of cotton or cotton - polyester, synthetics & dyed / undyed yarns etc.
Characteristics
Properties | Palknit-22 | Palknit-32 |
---|---|---|
Appearance | Clear Liquid Free From Suspended Matter | |
Colour | Colour Less Liquid | |
Ph Of 10% Emulsion | 44385 | 44385 |
Kinematic Viscosity, Cst @40°C | 20-24 | 29-35 |
Ionic Nature | Non- Ionic | Non-Ionic |
Specific Gravity @ 15 °C | 0.86-0.87 | 0.86-0.87 |
Flash Point, Coc, °C, Min. | 180 | 180 |
Wash Ability | Excellent | Excellent |
* The Specifications Are Subject To Variations/Development/Customization. |
These are economical type washable knitting oils which are self-emulsifier in water and provide high level of scour ability from knitted yarns or fabrics.
Formulated by using high quality of mineral oils & fortified with selected additives so as to provide good anti-wear, antirust, antistatic & anti-oxidant properties.
Recommended as non-staining type needle lubricants for large diameter circular knitting machines as well as for various other types of knitting machines & are suitable for automatic oiling units commonly fixed to circular knitting machines or by manual oiling methods. These are recommended for knitting of cotton or cotton-polyester, synthetics & dyed / undyed yarns etc.
Characteristics
Properties | Palknit-22 (E) | Palknit-32 (E) |
---|---|---|
Appearance | Amber Fluid | |
Colour | Colourless To Slightly Yellowish | |
Ph Of 10% Emulsion | 44385 | 44385 |
Kinematic Viscosity, Cst @40°C | 20-24 | 29-35 |
Ionic Nature | Non- Ionic | Non-Ionic |
Specific Gravity @ 15 °C | 0.86-0.87 | 0.86-0.87 |
Flash Point, Coc, °C, Min. | 180 | 180 |
Wash Ability | Good | Good |
* The Specifications Are Subject To Variations/Development/Customization. |
These are developed to meet satisfactory lubrication under moderate oxidation & thermal performance. Blended from high performance solvent refined & hydro cracked base stocks with suitable selected antioxidants, antiwear, antirust & antifoam additives.
Features
Recommended for moderate performance reciporcating rotary air / screw compressors upto a discharge air temperature of 220ºC. These oils are suitable for use in air vacuum pump designed to deliver at a pressure greater then the atmosphere pressure.
These are specially developed compressor oils to provide satisfactory lubrication under prolonged high temperature & load conditions. These are formulated with selected base stocks & special compounding agent to give excellent resistance to washing effect of water. These are further fortified with anti-rust & anti-corrosion agent & have good fluidity at low temperature.
Features
Recommended for cylinder lubrication of single & multistage compressors handling moist air, PALCOMP C are not recommended for crankcase lubrication.
Characteristics
Properties | Palcomp C | |||
100 | 150 | 220 | 320 | |
Appearance | Clear, Bright Colour | |||
Kinematic Viscosity, Cst @40ºC | 90-100 | 140-160 | 200-240 | 300-340 |
Viscosity Index, Min. | 90 | 80 | 80 | 80 |
Flash Point, Coc,ºc, Min. | 180 | 180 | 200 | 200 |
Saponification Number, Koh/G | 2.5-5.0 | 2.5-5.0 | 2.5-5.0 | 44357 |
* The Specifications Are Subject To Variations/Development/Customization. |
This is a specially developed compressor oil to provide satisfactory lubrication under prolonged high temperature & load conditions. Formulated from highly refined & saturated oil molecules derived by the process of isomerization & severe hydrogenation & fortified with balanced combination of anti-oxidants, EP / Anti wear, anti-rust & anti foam additives.
Features
Recommended for modern rotary air screw compressors up to a discharge temperature of 220°C. This oil is also suitable for use in air vacuum pump designed to deliver at a pressure greater than the atmosphere pressure.
Characteristics
Properties | Palcomp (S) -68 |
---|---|
Appearance | Clear & Bright |
Kinematic Viscosity, Cst @40ºC | 64-72 |
Viscosity Index, Min. | 90 |
Flash Point, Coc,ºc, Min. | 180 |
Ccr, % Wt., Max. | 0.3 |
* The Specifications Are Subject To Variations/Development/Customization. |
ENERGY- 20W50 & 20W40 are super-premium multigrade oils for gasoline / diesel engines, meeting API: SL/CF, performance requirements. They are made from highly refined Group II base oils and selected additives to keep the engine easy start in all weather conditions. Due to excellent oxidation and nitration resistance, it extends the oil drain interval reducing the operation cost.
Features
Application
Recommended for the modern petrol engine passenger cars and can also be used in cars using CNG/LPG as fuel.
Characteristics
Properties | Energy-20w50 | Energy -20W40 |
---|---|---|
Appearance | Clear Golden Natural | |
Kinematic Viscosity, Cst @ 100° C | 16.5-20 | 44546 |
Viscosity Index, Min. | 120 | |
Pour Point, °C, Max. | -21 | |
Flash Point, Coc, °C, Min | 220 | |
Tbn, Mg. Koh/Gm. | 44355 | |
* The Specifications Are Subject To Variations/Development/Customization. |
It is a high boiling Synthetic Brake fluid which is made from mixed Polyalkylene Glycol ethers and Borate esters and doped with various high performance additives and inhibitors which give ultimate system protection against the effects of rust and corrosion and high temperature vapour lock. The Formulations are balanced so that the Vapour lock point is able to sustain at higher level than the conventional glycol ether based fluids during the service life of the product.
Features
Applications
Recommended for Hydraulic system for Modern fuel efficient motor vehicles such as passenger cars ( Maruti, Hyundai, General Motors, BMW, Diamler Benz, Tata etc), Trucks, Buses, Tractors, Heavy Earth Moving Equipment’s etc. operating under moderate to severe duty Conditions.
Characteristics
Properties | Dot-4 |
---|---|
Colour | Light Yellow |
Kinematic Viscosity,-40ºc, Max. | 1800 |
Kinematic Viscosity, Cst,@ 100ºc, Min. | 1.5 |
Ph Value | 7 To 11.5 |
Wet Erbp, °C, Min., | 155 |
Erbp, °C, Min (Equilibrium Reflux Boiling Point) | 230 |
* The Specifications Are Subject To Variations/Development/Customization. |
ICY KOOL & MINT KOOL
These are non petroleum base engine coolant formulated from ethylene glycol and special inhibitors, free from nitrite borates, silicates, phosphates and amines. It is the prue organic acid technology. It is used in all types of automotive vehicles/industrial engines' radiators, for protection against corrosion / deposits and ensure efficient heat transfer.;
Features
Applications
All kinds of petrol/diesel engine driven passenger cars, jeeps, vans, commercial vehicles and stationery engines operating with water as a cooling medium.
Dilution Recommended
Performance Level
Characteristics
Properties | Coolant | |
Icy Kool | Mint Kool | |
Appearance | Clear Fluorescent Green Colour Liquid. | Clear Fluorescent Green Colour Liquid. |
Ph Value | 38573 | 44386 |
Reserve Alkalinity, Ml. | 21-25 | 21-24 |
* The Specifications Are Subject To Variations/Development/Customization. |
These are non petroleum base engine coolant cum-antifreeze, formulated from ethylene glycol and special inhibitors. It is used in all types of automotive vehicles/industrial engines' radiators, for protection against winter - freezing and summer boil out of cooling liquid.
Features
Applications
All kinds of petrol/diesel engine driven passenger cars, jeeps, vans, commercial vehicles and stationery engines operating with water as a cooling medium.
Characteristics
Properties | Coolant | |
Ultra Cool | Extra Cool | |
Appearance | Clear Fluorescent Green Colour Liquid. | Clear Fluorescent Green Colour Liquid. |
Boiling Point, °C, Min. | 160 | 105 |
Freezing Point. °C, Max. | (-)34 ( For 50:50 Solution) | (-)32 |
Ph Value | 38573 | 44386 |
Reserve Alkalinity, Ml. | 21-25 | 44322 |
Water Content, %,max | 5 | 66 |
* The Specifications Are Subject To Variations/Development/Customization. |
It has been developed to improve viscosity and viscosity Index of engine oil, thus reducing oil consumption & smoke exhaust levels and improving engine compression. It is premium quality mineral oil base product, carefully blended from selected hermavis based additives. The product is most efficient and popular, particularly in extending the life of an old worn out engine and to plan for major overhaul of an engine of a vehicle.
Features
Applications
To be added in 5 to 10% by volume in engine oil, depending upon the condition of old engines of cars, commercial vehicles, stationery engine etc. or as recommend by service centers.
Characteristics
Properties | Engine Oil Saver |
---|---|
Appearance | Light Golden |
Kinematic Viscosity, Cst @ 100° C | 160-170 |
Viscosity Index, Min. | 180 |
Pour Point, °C, Max. | -6 |
Flash Point, Coc, °C, Min. | 200 |
* The Specifications Are Subject To Variations/Development/Customization. |
It is a non-petroleum base, polyglycol type brake fluid meeting DOT-3 performance requirements. It is designed for use in brake and clutch system, fitted with rubber cups and seals made from natural rubber (NR), styrene-butadiene rubber (SBR), or a terpolymer of ethylene, propylene, and a diene (EPDM).
Features
Applications
Hydraulic braking system of modern fuel efficient motor vehicles such as passenger cars (Maruti, Hyundai, Fiat, Tata, etc.), trucks, buses, tractors, trailers, heavy earth moving machinery etc. operating under moderate duty service conditions.
Characteristics
Properties | Hawk |
---|---|
Kinematic Viscosity, Cst, @ -40ºC, Max. | 1500 |
Kinematic Viscosity, Cst,@ 100ºc, Min. | 1.5 |
Ph Value | 7 To 11.5 |
Erbp, °C, Min., | Dry - 205, Wet -140 |
Colour | Red (crimson) |
Rubber Swelling Properties | Passes |
* The Specifications Are Subject To Variations/Development/Customization. |
These are heavy viscous black bituminous product, fortified with special EP and thickness agents. They have excellent film strength to withstand the high pressure normally encountered in heavily loaded open gears. They also possess good antiwear and antirust properties. They are homogeneous and heat reversible, i.e., they return to the same homogeneous state after heating as before heating. Thus they have the ability to stay in place and provide protection to open gears and wire ropes.
Recommended for lubrication of open gears, cable and wire ropes.
Not recommended for lightly loaded open gears and not to be used in food processing industries.
Characteristics
Properties | Pal Ogc 120 | Pal Ogc 140 |
---|---|---|
Kinematic Viscosity, Cst @100ºC | 200-250 | 400-550 |
Flash Point, Coc, ºc, Min. | 210 | 210 |
Copper Strip Corrosion Test, 3 Hrs, @ 100ºc, Max. | Negative | Negative |
Acidity, Inorganic | Nil | Nil |
Water Content, %by Mass, Max. | 1 | 1 |
Homogeneity Test | Passes | Passes |
Colour | Black | Black |
* The Specifications Are Subject To Variations/Development/Customization. |