Paramount Chill Rolls Pvt Ltd

Malerkotla, Sangrur, Punjab

We offer fluted rolls of superior quality. These are made of alloyed or unalloyed cast iron. They have a good surface hardness. These are ideal to be used in different industries. Among the various types of fluted rolls, corrugated fluted rolls and straight fluted stalk rolls are very much popular. Best quality raw materials and the most sophisticated technologies are used to make these products highly durable and more performance oriented. We are among the reputed manufacturers and exporters of fluted rolls. functionthe function offluted rolls depends essentially onthe following influences : (a) roll parameters:roll materialroll diametersurface profile (number and angle offlutes, flutemomentum and base flute face)flute edge-sharpness at the profile surface. (b) roller mill and lor roll unit parameters. Niproll perimeter speedroll differentialflute positionrate of feed (c) mechanostructural properties of the grinding stock/bulk materialkind of grain I grinding stockcollochemical structuresgranulation spectrumcombination of mattermoistureresistance to cutting, clipping, splitting, crushing scrapping, grinding, rubbing and pressure, as well assusceptibility to fragmentation.

We offer Fluted Rolls of superior quality. These are made of alloyed or unalloyed cast iron. They have a good surface hardness. These are ideal to be used in different industries. Among the various types of Fluted Rolls, Corrugated Fluted Rolls and Straight Fluted Stalk Rolls are very much popular. Best quality raw materials and the most sophisticated technologies are used to make these products highly durable and more performance oriented. We are among the reputed Manufacturers and Exporters of fluted rolls. FunctionThe function offluted rolls depends essentially onthe Following Influences : (A) Roll parameters:

• Roll material
• Roll diameter
• Surface profile (number and angle offlutes, flutemomentum and base flute face)
• Flute edge-sharpness at the profile surface.

(b) Roller mill and lor roll unit parameters.

• Nip
• Roll Perimeter Speed
• Roll Differential
• Flute position
• Rate of Feed

(c) Mechanostructural properties of the grinding stock/bulk material

• Kind of grain I grinding stock
• Collochemical structures
• Granulation spectrum
• Combination of matter
• Moisture
• Resistance to cutting, clipping, splitting, crushing scrapping, grinding, rubbing and pressure, as well as
• Susceptibility to fragmentation.

We offer premium quality Self Surfacing Smooth Rolls made of best quality materials. These are manufactured using the most sophisticated technology so as to make more performance oriented. The Smooth Rolls Mill offered by is frequently used in different industries with great results. Our Chill Cast Smooth Rolls are well-known in the market for its quality. We are prominent self surfacing smooth rolls exporters in India. Field Of Application

• In all passages of wheat milling plant where classical smooth rolls have been employed to -date.
• For sizing reduction, tailing reduction and later and last middling where for milling engineering reasons I fluted rolls hadto be used until now.
• For middling passages in combined wheat-rye flour mills where fluted rolls had to be used for reasons of milling engineering.
• For many specific crushing, cracking and milling tasks where in the absence of specific methods of comminution classical smooth rolls, fluted rolls, impact grinders or other systems were necessary so far.This applies to the milling and cracking or processing of bulk material in all fields, mainly however to the foodstuffs, stimulants, spices, fodder and chemical and pharmaceutics industries.

We are offering self surfacing flaking rolls for solvent plant, flacking machinery. self surfacing flaking rolls offered by us are made of best quality alloy iron. The flaking rolls manufactured by us are highly durable and performance oriented. These are found with different specifications. We are among the leading industrial flaking rolls manufacturers of india. Consequently, we are among the prominent suppliers of self surfacing flaking rolls. filed of applicationin all oil and grease flaking roll systems and for all ranges of comminution where a high surface activityof the milled stock on grounds of the surface-to-volume ratio is to be achieved and where relatively highpressure and cutting forces (abradant forces) are exerted. as smooth rolls in oil milling, e.g. Soybeans, sunflower seed, pea nuts, guar gum, rape, sesame coco, palm seed, etc.as smooth rolls for making cereals, (e.g. Cornflakes, chips, rice flaking etc.) and for certain mixed provender's or constituents thereof.as smooth rolls in certain roller mills for processing tobacco, pastry and dough, chocolate, cocoa, soap, varnish, and paints and pulverized pourable matter off all kind and for all application. benefits:superior exposure and disintergration ofthe oil cells.reduction of energy consumption.constantly higher rate of feed.improve extraction.less or no edge spalling.no pitting.wrapping.no shell spallinguniform flake thickness.extended servicing in tervals.excellent and constant feeding capacity.less grinding off with re paris.elimination and I or considerable reduction of roller mill vibrations (whether inherent with the individual system or caused by the foundation) and consequently reduction also of operational and structure borne noise and damage to the building.roll cooling may be dispensed with in a number of applications as -due to an improved roughness and or non skid property, less energy is required and less heating up occurs. The efficiency of this special quality relies mainly on the above points that- to the benefit ofthe user - add up to considerable saving in the costs of the rolls (e.g. Investment and the upkeep of fuctionability) ordering and order processingthe useful life and consequently, the efficiency of this by no means "cheap" though considering the quality good value roll depends mainly on the customers detailed description of the prospective working conditions. a main point in this context is that, the better we, as the roll manufacturers are informed, the better will we be able to select and prepare the right roll material. The user may well consider the questionnaire to be a "chore". However, if he wishes to run his plant economically then every detail counts. Today, with system as advanced as they are, one can hardly reduce costs by just one lucky shot. It's the little things that count nowadays, and they can well be of decisive moments where it comes to holding one's own with the competitors. therefore every user should spend time and effort on formulating the specific conditions regarding this all-importanttool, the roll! our roll offer the following significant characteristics :produced as single or double poured castings according to specification and/or requirement.( double poured casting is preferable for high alloy qualities.)bored through to uniform wall thickness.steel journals shrunk in or bolted on depending on the type of roller mill.stress rei ieved by heat treatment.dynamically balanced.outside diameter completely stone ground with max. 5 radial deviations (o.003in).aii surface shapes are feasible: cylindric, crowned chamfered edges, diameters tapered towards the barrel end and/or any and every individual curve.we supply rolls ready to be installed in all types of roller mills. We regenerate and repair rolls at short notice and a fair price. Our technical staff is at your disposal for advising you on all problems of a technological and comminution - related nature.

Self Surfacing Flaking Rolls offered by us are made of best quality alloy iron. The Flaking Rolls manufactured by us are highly durable and performance oriented. These are found with different specifications. We are among the leading Industrial Flaking Rolls Manufacturers of India. Consequently, we are among the prominent Suppliers of Self Surfacing Flaking Rolls. Filed Of Application

• In all oil and grease flaking roll systems and for all ranges of comminution where a high surface activityof the milled stock on grounds of the surface-to-volume ratio is to be achieved and where relatively highpressure and cutting forces (abradantforces) are exerted.
• As smooth rolls in oil milling, e.g. soybeans, sunflower seed, pea nuts, guar gum, rape, sesame coco, palm seed, etc.
• As smooth rolls for making cereals, (e.g. cornflakes, chips, rice flaking etc.) and for certain mixed provender's or constituents thereof.
• As smooth rolls in certain roller mills for processing tobacco, pastry and dough, chocolate, cocoa, soap, varnish, and paints and pulverized pourable matter off all kind and for all application.

Benefits:

• Superior exposure and disintergration ofthe oil cells.
• Reduction of energy consumption.
• Constantly higher rate of feed.
• Improve extraction.
• Less or no edge spalling.
• No pitting.
• Wrapping.
• No Shell Spalling
• Uniform flake thickness.
• Extended servicing in tervals.
• Excellent and constant feeding capacity.
• Less grinding off with re paris.
• Elimination and I or considerable reduction of roller mill vibrations (Whether inherent with the individual system or caused by the foundation) and consequently reduction also of operational and structure borne noise and damage to the building.
• roll cooling may be dispensed with in a number of applications as -due to an improved roughness and or non skid property, less energy is required and less heating up occurs.

The efficiency of this special quality relies mainly on the above points that- to the benefit ofthe user - add up to considerable saving in the costs of the rolls (e.g. investment and the upkeep of fuctionability)

Ordering And Order ProcessingThe useful life and consequently, the efficiency of this by no means "cheap" though considering the quality good value roll depends mainly on the customers detailed description of the prospective working conditions. A main point in this context is that, the better we, as the roll manufacturers are informed, the better will we be able to select and prepare the right roll material. The user may well consider the questionnaire to be a "chore". However, if he wishes to run his plant economically then every detail counts. Today, with system as advanced as they are, one can hardly reduce costs by just one lucky shot. It's the little things that count nowadays, and they can well be of decisive moments where it comes to holding one's own with the competitors. Therefore every user should spend time and effort on formulating the specific conditions regarding this all-importanttool, the roll! Our Roll Offer The Following Significant Characteristics :

• Produced as single or double poured castings according to specification and/or requirement.( double poured casting is preferable for high alloy qualities.)
• Bored through to uniform wall thickness.
• Steel journals shrunk in or bolted on depending on the type of roller mill.
• Stress rei ieved by heat treatment.
• Dynamically balanced.
• Outside diameter completely stone ground with max. 5 radial deviations (O.003in).
• AII surface shapes are feasible: cylindric, crowned chamfered edges, diameters tapered towards the barrel end and/or any and every individual curve.We supply rolls ready to be installed in all types of roller mills. We regenerate and repair rolls at short notice and a fair price. Our Technical staff is at your disposal for advising you on all problems of a technological and comminution - related nature.

With excellent and reliable shipping facilities, our team delivers the product range in the dedicated time period. Ours is the known organization deeply ingrained in the Malerkotla(India) and make sure to reach any destination with ease.

Besides manufacturing and supplying, we also provide Repair & Maintenance Services of chiller plants. Our highly skilled workers provide time to time maintenance services to the valuable customers as per their requirements. We have achieved a good name in the Machine Repair & Maintenance services by maintaining the credibility towards the clients. As soon as we get any kind of complaint from any client, we are very prompt to reach there and solve his problem as early as possible. In fact, we have made Chiller Plant Repair in India, an easy task that too in a cost effective manner.