Papertex Speciality Chemicals Pvt. Ltd.

Batala Road, Amritsar, Punjab

PTSC WSR 3632 Wet Strength Resin PTSC WSR 3632 is a cationic polyamide wet strength resin supplied as an aqueous solution containing Approximate 12.5% solids. When applied under acidic or alkaline stock conditions, PTSC WSR 3632 will efficiently increase the wet strength properties of finished paper or paperboard products. Use and Application PTSC WSR 3632 resin is highly effective for developing wet strength in facial tissue, napkins, towels, carrier board, liquid packaging, bag paper, linerboard, medium, and other Speciality papers. PTSC WSR 3632 performs over a broad pH range of 4.0 – 9.0 (with best efficiency between 6.5 – 8.0) in the presence of normal papermaking additives. Typical furnish levels range from 0.2 to 0.75% (dry basis), which is dependent upon the wet strength level desired and the grade being manufactured. PTSC WSR 3632 can be added to either the thin or thick stock systems. Best results are achieved with sufficient random dilution and maximum available stock agitation at the point of addition. PTSC WSR 3632 should be added after rosin size and alum addition

The wet strength is not fully developed by the time a paper product reaches the end of a paper machine, and strength continues to develop as the paper is stored. The rate of curing is affected by the temperature and the length of time in contact with heat. The bonds that are eventually formed are not readily broken under either acid or slightly alkaline conditions, and the wet strength is therefore permanent. Whilst this can be an advantage in certain applications, it does make the paper or paperboard more difficult to disintegrate. However, the difficulties for the disintegration of WSR -treated paper have not been reported practically when the dosage level of WSR resin is below 4%.

Benefits

• Effective at the pH 4 to 8, optimum wet strength is obtained in a neutral or slightly alkaline medium.
• It is used extensively in all types of wet-strength papers. e.g paper towels, napkins, facial tissue, and packaging materials like liquid packaging, corrugated boxes, paper bags, and specialties such as photographic papers, wrappings and disposables.

Safety

According to the experience we have gained over many years and other information they do not exert any harmful effect on health, provided they are used properly. For details go through the safety data sheet

Handling & Storage

Should be stored in original packaging in cool and dry place, away from sources of heat, flame and direct sunlight, this product will be stable for at least 24 months.

Standard Package

PTSC WSR 3632 is delivered in 225 kg HDPE drum. other packing sizes on request

Our firm is offering Dry Strength Resin to our highly valued clients. It is most suitable product for short fiber pulp like Bagasse, Straw, Waste paper, Bamboo, hard wood etc. It also improves strength properties like burst factor, stiffness, breaking length, ply bonding, tear factor of Kraft, Duplex board and writing and printing paper also increases machine run ability. It improves retention of fillers and eliminates press picking problem of paper.