Panchvaktram Engineering Pvt. Ltd.

Netaji Subhash Place, Delhi

The self-drilling Hollow bar anchor system is comprised of a hollow threaded bar with an attached drill bit that can perform drilling, anchoring and grouting in a single operation. The hollow bar allows air and water to freely pass through the bar during drilling to remove debris and then allow grout to be injected immediately after drilling is completed. Grout fills the hollow bar and completely covers the entire bolt. Couplers can be used to join hollow bars and extend the bolt length while nuts and plates are used to provide the required tension.

Panchvaktram Engineering offers Self Drilling Anchors in variants of R25, R32, R38, R51 and T76 and their accessories including the Anchor Nut, Anchor Plate, Anchor Coupler and Drilling bits depending on the geological condition of the project site (Type EX, EXX, ES, ESS, EY, EYY)

FiReP REBAR FRP reinforcement is the production range for internal reinforcement of concrete structures. It offers a wide range of different shapes, that almost every shape known from steel rebar can be produced in FRP.

FiReP REBAR FRP reinforcement can either be used for permanent applications e.g. in case of requirements of highest durability, maintenance free and corrosion free structures as well as in the case of the requirement to avoid disturbances of electric or magnetic fields or for temporary application (e.g. Soft-Eyes)

For temporary reinforcement of diaphragm walls, it is now state of the art to use a mixed cages of steel in the upper and lower section and FRP in the middle section. This section, called Soft-Eye, that will later be cut by TBM, is important for time and cost effective operation of TBM.

Key advantages include high corrosion resistance for permanent application, proper bonding to concrete high tensile strength, low weight, magnetic neutrality / antimagnetic and easy cutting

Key applications include the use of rebars in temporary application (soft eye), exposed structures, infrastructural buildings, waterway engineering, railways/ aprons using induction loops, industrial plants, foundations to name a few

Nelson offers a complete line ofStud Welding Machineunder the Nelson Nelweld, N800i, N1500i, and NCD+ brands and offers custom designed modular, fixed production and robotic TARC and NUT welding systems. The company offers its products through two categories, namely,

• Studs :Offers variety of specialised and standardised fasteners including threaded and non-threaded studs, collar studs, deformed bar anchors, headed concrete anchors, T-studs, lagging studs, shear connectors, insulation pins, wide flange studs and a full complement of specialised fasteners
• Equipment & Systems :Offers a complete line of portable and feed stud welding systems, including custom designed systems for a variety of end use applications including fixed manual and automatic feed systems for high production environments

• Automotive Sector :Typical applications include securing body trims, electrical fuel and hydraulic lines, components and insulation
• Construction Sector :Offers a full complement of stud welding fasteners and application equipment to non-residential building contractors and OEMs for use in applications ranging from bridges and high-rise buildings to construction machinery and power generation equipment including nuclear power plants
• Industrial sector :Offers products that are used by OEM's in the manufacture of arm machinery, drilling machinery, maintenance vehicles, power transformers, industrial control systems, gas turbine engines and conveyor belts to consumer and commercial products such as kitchen ranges, washers, recreational vehicles and medical equipment

ACE is a turnkey solution provider covering the design, manufacture, testing and installation of high quality bespoke winching equipment and deck machinery.

Key products include drum winches, spooling winches, linear winches, traction winches, umbilical winches, tensioners and powered reel systems, launch & recovery systems, control & monitoring systems, hydraulic power units, rollers, sheaves & fairleads

Primary applications include lifting winches, abandonment and recovery winches, mooring and anchor winches, subsea umbilical, riser and flowline (SURF) installation, salvage and decommissioning, pipelay and trenching operations among others

ACE Hire Equipment supplies a comprehensive range of winch and deck machinery equipment for use on floating vessels, fixed offshore installations and land-based projects.

Key products offered for hire include drum winches, spooling winches, linear and wire storage winches, chain winches, synthetic rope traction winches, hose reelers, running line monitors, rollers, sheaves & fairleads and other ancillary equipment

All equipment is manufactured or refurbished and serviced in a dedicated maintenance facility, accredited to ISO 9001:2008 standard by BSI

BBV develops and produces low to high grade threaded steel bars and related accessories with a focus on post-tensioning, geotechnical, mining and concrete reinforcing systems

Primarily applied in the field of civil engineering including bridges, buildings and industrial construction projects demand for the application of pre-stressed or post-tensioned concrete members

Engages in the manufacture and trade in high tensile steel bars, related hardware, post tensioning components and systems, ground anchors and specialized post tensioning equipment.

The RTA Bolt comes together with a suitable grouting cup to facilitate grouting of the stressed bolts. Less complex rock nails for strata control can be supplied as slash cut mild steel bars with black steel plates and hexagonal nuts

Designs, produces and delivers sophisticated Gangway Systems, which are easy to change according to client demands. These systems are used to give personal and crew access to ship and shore. The access gangway can be fully automatic in standard execution or tailor-made to meet client requirements

Key products include access towers, telescopic gangways with self levelling steps, electric or hydraulic cranes, control cabins, (EX) radiographic remote control systems and fire fighting equipment

Designs, produces and delivers a wide range of cranes for: seagoing ships, ships for inland waterways, dredgers, on- and off-shore usage, hose handling and for ex purposes. SHF Cranes can be manual, electric, and hydraulic or diesel driven. With all the cranes

Offers various types of towers depending upon the clients project needs including fixed jib slewing deck crane, luffing by cylinder, telescopic cranes, folding jib cranes, customised overhead cranes, rack and pinion driven pump- and engine room cranes or trolleys

The Dowelock system is a boltless connection device for joining two segmental rings together on the circumferential joint. Dowelock is designed to operate with compressible gaskets (Hydrophilic or Elastomeric with or without molded corners). The performance of the dowel is compatible with the compression characteristics of these types of gasket and copes with varying joint gaps whilst minimising gasket offset.

Dowelock consists of a connecting dowel moulded from a high strength, high durability plastic, together with two locking assemblies; one cast into each of the adjacent tunnel lining segments. These locking assemblies incorporate patented locking collets that allow the dowel to enter with a minimal insertion force and then lock, thus preventing the dowel from withdrawing. These collets are retained in such a way as to allow the dowel to be entered off line as they have the capability to rotate whilst the dowel is inserted and therefore aligning and securing the precast concrete units.

Product range includes Dowelock 20, 30, 38 and 45 with tensile strength ranging from 60kn to 20 tons+

Designs and manufactures a wide range of grout/lifting socket assemblies, bolting systems, alignment dowels and miscellaneous products to work alongside the Dowelock system

Switches and crossings play an essential role in connecting the rail network. They are used to guide trains from one track to another and to enable lines to cross paths. Put simply, they're the junctions that allow us to create a multi-lined, multi-routed rail network.

Junction Boxes are made out of CRCA/FRP/Stainless Steel designed to accommodate the required number of terminals with adequate / comfortable space for the multi pair cable entry and distribution.