Panchasara Machine Tools

Udyog Nagar, Jamnagar, Gujarat

We are listed at the apex in the list of the prominent Round Wire Straightening Machines Manufacturers & Exporters from India. The Round Wire Straightening Machines are ideally designed for round rodswires. Sizes Available : Diameter 4mm to 10mmDiameter 10mm to 25mm Diameter 25mm to 50mmLength = as per wire size Raw Material Used : Structures : C Channel ( 3 inch to 6 inch)Roll Material : EN 31 Hard Temper Attributes : C Channel Heavy StructuresTwo Rolls Reeling MethodFour Gear SpeedHeavy Duty Reduction Gear Box as per machineDifferent wire size adjustable by HandleBest Finishing of Rod Surface Finishing Uses : Rod Straightening (Bar, Rod & Pipe)Brass, Copper & Alloy Material Extrusion Plan Rolling Mill Fasteners Manufa cturers Straigh tening in gold rod Colors Available : Green and Blue Blue & YellowAs per customers

==>Wire Drawing Machine (9 Blocks) (Extra Heavy Duty, High speed)1. Inlet wire size: 2.5 M.M.Finished wire size: 1 M.M. /0.9 M.M.2. Drum Dia. = 300mm, Height = 200mm with graded cast Iran (Hardening and Polishing surface)3. Heavy duty Vertical gear box = 5 Center 4. Variable Speed Change by Panel Board5. Motor Recommended = 10/960, 7.5/960, 7.5/1440 & rest 5/1440.6. Dog Chain for start drawing 3 nos. with lock and chain7. Draw Material = Mild steel Annealed Wires8. Finishing Speed: 1500 to 1680 Ft. per minute.9. Production (Average): 0.9 M. Tons per shift in 8 hours @ 75% efficiency. (For 1mm wire)10. STANDARD ACCESSORIES = Seven Continuous Attachments fittings with the Machines, Six-V Pulleys for Electric Motors, Electric motors fitting in Back side of machine (not any extra foundation for motor)

We are listed at the apex in the list of the prominent round wire straightening machines manufacturers & exporters from india. The round wire straightening machines are ideally designed for round rods/wires. Sizes available : diameter 4mm to 10mmdiameter 10mm to 25mm diameter 25mm to 50mmlength = as per wire size raw material used : structures : c channel ( 3 inch to 6 inch)roll material : en 31 hard temper attributes : c channel heavy structurestwo rolls reeling methodfour gear speedheavy duty reduction gear box as per machinedifferent wire size adjustable by handlebest finishing of rod surface finishing uses : rod straightening (bar, rod & pipe)brass, copper & alloy material extrusion planrolling millfasteners manufacturersstraightening in gold rod colors available : green and blueblue & yellowas per customers

We are looked upon as one of the supreme square wire straightening machines manufacturers & exporters from india. Our square wire straightening machines are widely demanded for square, hex & strip straightening. Sizes available :diameter 4mm to 10mmdiameter 10mm to 25mmdiameter 25mm to 50mmlength = as per wire sizeattributes :c channel heavy structurestotal roll = 13 nos.strip size adjustable setting by 8 slidesheavy duty reduction gear box as per machine. Uses :use in rod straightening (hex, strip & square rod/wire)use in brass, copper & alloy material extrusion planuse in rolling milluse in fasteners manufacturersuse in straightening in gold rodcolors available :green and blueblue & yellowas per customers

Our company is counted as one amidst the preeminent wire draw machines manufacturers & exporters from india. Various national as well as international clients to place repeated orders for our wire draw machines as no alternative is available when it comes to quality and performance. Sizes available :diameter 3mm to 60mm capacitylength 3 feet to 85 feetas per customer requirementsraw material used :structures : I beam ( 6 inch to 14 inch)2. Chain : original renold/subuki japan chain (2 inch to 4 inch pitch)steel gear (maximum dia. 30 inch)attributes :I beam heavy structuresfour gear speedheavy duty gear & single/double gear countercounter gear fitting by 6318 bearing housinguses :draw (bar, rod, strip & pipe)brass, copper & alloy material extrusion planrolling millfasteners manufacturersdraw in gold rodcolors available :green and blueblue & yellowas per customers

We offer Wire Draw Machine.our company is counted as one amidst the preeminent wire draw machines manufacturers & exporters from india. various national as well as international clients to place repeated orders for our wire draw machines as no alternative is available when it comes to quality and performance.sizes available :diameter 3mm to 60mm capacitylength 3 feet to 85 feetas per customer requirementsraw material used :structures : i beam ( 6 inch to 14 inch)2. chain : original renold/subuki japan chain (2 inch to 4 inch pitch)steel gear (maximum dia. 30 inch)attributes :i beam heavy structuresfour gear speedheavy duty gear & single/double gear countercounter gear fitting by 6318 bearing housinguses :draw (bar, rod, strip & pipe)brass, copper & alloy material extrusion planrolling millfasteners manufacturersdraw in gold rodcolors available :green and blueblue & yellowas per customers

We are offering round wire straightening machine (4mm to 10mm). we are listed at the apex in the list of the prominent round wire straightening machines manufacturers & exporters from india. The round wire straightening machines are ideally designed for round rods/wires. sizes available :diameter 4mm to 10mmdiameter 10mm to 30mmdiameter 30mm to 60mmlength = as per wire sizeraw material used :structures : c channel ( 3 inch to 6 inch)roll material : high chromium high carbon (wps) hard temper + grainingattributes : c channel heavy structurestwo rolls reeling methodfour gear speedheavy duty 4 speed gear boxdifferent wire size adjustable by handlebest finishing of rod surface finishinguses :rod straightening (bar, rod & pipe)brass, copper, m.s., s. S. & alloy material extrusion plantrolling millfasteners manufacturersstraightening in gold rod/wirecolors available :green and blue-blue & yellowas per customers requirements.

Our company is counted as one amidst the preeminent wire draw machines manufacturers & exporters from india. Various national as well as international clients to place repeated orders for our wire draw machines as no alternative is available when it comes to quality and performance. Sizes available :diameter 3mm to 60mm capacitylength 3 feet to 85 feetas per customer requirementsraw material used :structures : I beam ( 6 inch to 14 inch)2. Chain : original renold/subuki japan chain (2 inch to 4 inch pitch)steel gear (maximum dia. 30 inch)attributes :I beam heavy structuresfour gear speedheavy duty gear & single/double gear countercounter gear fitting by 6318 bearing housinguses :draw (bar, rod, strip & pipe)brass, copper & alloy material extrusion planrolling millfasteners manufacturersdraw in gold rodcolors available :green and blueblue & yellowas per customers

Our company is counted as one amidst the preeminent wire draw machines manufacturers & exporters from india. Various national as well as international clients to place repeated orders for our wire draw machines as no alternative is available when it comes to quality and performance. Sizes available :diameter 3mm to 60mm capacitylength 3 feet to 85 feetas per customer requirementsraw material used :structures : I beam ( 6 inch to 14 inch)2. Chain : original renold/subuki japan chain (2 inch to 4 inch pitch)steel gear (maximum dia. 30 inch)attributes :I beam heavy structuresfour gear speedheavy duty gear & single/double gear countercounter gear fitting by 6318 bearing housinguses :draw (bar, rod, strip & pipe)brass, copper & alloy material extrusion planrolling millfasteners manufacturersdraw in gold rodcolors available :green and blueblue & yellowas per customers

Our company is counted as one amidst the preeminent wire draw machines manufacturers & exporters from india. Various national as well as international clients to place repeated orders for our wire draw machines as no alternative is available when it comes to quality and performance. sizes available :diameter 3mm to 60mm capacitylength 3 feet to 85 feetas per customer requirementsraw material used :structures : I beam ( 6 inch to 14 inch)2. Chain : original renold/subuki japan chain (2 inch to 4 inch pitch)steel gear (maximum dia. 30 inch)attributes :I beam heavy structuresfour gear speedheavy duty gear & single/double gear countercounter gear fitting by 6318 bearing housinguses :draw (bar, rod, strip & pipe)brass, copper & alloy material extrusion planrolling millfasteners manufacturersdraw in gold rodcolors available :green and blueblue & yellowas per customers

Easy to adjust and change, our Wire Straightening Cum Cutting Machines are highly acclaimed for their high productivity and low maintenance. We are a renowned Manufacturer, Supplier and Exporter of Wire Straightening Cum Cutting Machines from Gujarat. The Wire Straightening Cum Cutting Machines offered by us have very low power consumption. We hold the expertise of delivering bulk orders of the Machines within the promised time frame.

 

Features :

• Fast Feeding & Straightening speed can be 25m per min
• Double set of feed rollers for smooth feeding
• High speed rotating spinner for getting exact straight wire
• Sound is slight during running and no vibrations
• Built on rigid Steel Fabricated Frame
• Low Maintenance with High Productivity
• Cutting tools have simple construction,  
• Easy to adjust and change
• Quickly and easily adjustable dies in spinner
• Consumes less Power

 

Application Areas :

• Threaded Bar
• “U” Bolt
• “J” Hooks
• RCC Pipe
• Spring Steel Wire
• Kitchen Wares
• Wire Manufacturers
• Bright-Bar Manufacturers

We are a nonpareil Manufacturer, Supplier and Exporter of Wire Drawing Machines from Gujarat. The Wire Drawing Machines offered by us feature sturdy construction and unmatched durability. Our Wire Drawing Machines are manufactured in adherence with international quality standards and norms. Owing to our brilliant logistics network, we are capable of delivering bulk orders of the Machines within the allocated time. One can obtain the Machines at affordable rates.

 

Technical Details :

• Wire Drawing Machine : 7 Blocks
• Inlet Wire Size : 8.00MM / 5.50MM
• Finished Wire Size : 3.37MM / 2.50MM
• Drum Dia. : 610mm
• Material Graded Cast Iron with Hardening & Polishing Surface
• Heavy Duty Vertical Gear Box : 10" Center
• Draw Material : Mild Steel
• Motor Recommended : 40/1440, 30/1440 & rest 25/1440
• Finishing Speed : 780 feet/minute
• Production : 4 MT per Shift @ 75% efficiency

 

Wire Drawing Machine : 9 Blocks

• Inlet Wire Size : 2.50MM
• Finished Wire Size : 1MM / 0.70MM
• Drum Dia. : 300mm
• Material Graded Cast Iron with Hardening & Polishing Surface
• Heavy Duty Vertical Gear Box : 5" Center
• Draw Material : Mild Steel
• Motor Recommended : 10/1440, 7.5/1440, 7.5/1440 & rest 5/1440
• Finishing Speed : 1680 feet/minute
• Production : 0.9 MT per Shift @ 75% efficiency

 

Features :

• Extra Heavy Duty and High Speed
• Sturdy Structure
• No Maintenance

The company is a prominent Manufacturer, Suppliers and Exporter of Wire Pointing Machines from Gujarat. Wire Pointing Machines we make available have a pointing length of 150mm. The entire range of the Wire Pointing Machines is manufactured in compliance with international quality standards and norms. We hold the expertise of delivering bulk orders of the Wire Pointing Machines within the stipulated time. One can obtain the Machines at reasonable rates.

Technical Specification :

• Wire Size : 0.5mm to 25mm (as per Customers required)
• Pointing Length : 150mm
• Roll Material : HCHC (Rolls making by Solid One peace material)
• Groove Radius machining by CNC Turning
• Operating : Panel Board (Automatic)
• Roll Rotation by Heavy Duty Gears
• H.P. Recommended : 3 H.P./ 1440RPM
• Roll Pressure adjustable by Two Screws and Operated by 1 Handle
• Oil Lubrication System fittings

Attributes :

• Easy Operation
• High Durability
• Heavy Duty design
• High Productivity
• Low Maintenance Cost

We offer bull block machine, triple die clamping wire drawing machine.

We are offering copper wire drawing machine.