Cylindrical (Dowel) or Parallel Pinsare used either to retain parts in a fixed position or to preserve alignment. A few of them are illustrated above. Type A, B, C, & D are unhardened from C-40 (EN-8) material. Our manufacturing range for Cylindrical (Dowel) Pins is 2mm to 25mm in diameter and 5mm to 150mm in length. Type E is hardened from silver steel material.

Internal Threaded Cylindrical (Dowel) Pinare for easy extraction, from blind holes. They are manufactured in soft condition (Type G) from C-40 material. Hardened Pins (Type F) are manufactured from case hardened alloy steel or as per buyers requirement. Air Vent may be provided.

Taper Pinsare preferred for parts which have to be taken apart frequently and when driving out the Cylindrical Pins, would tend to wear the holes and also to very accurate constructed tools and gauges which have to be kept in absolute alignment. Taper Pins are manufactured as per IS:6688 or DIN-1 or BS-46.

External & Internal Threaded Taper Pins

Taper Pinsare preferred for parts which have to be taken apart frequently and when driving out the Cylindrical Pins, would tend to wear the holes and also to very accurate constructed tools and gauges which have to be kept in absolute alignment. Taper Pins are manufactured as per IS:6688 or DIN-1 or BS-46.

External & Internal Threaded Taper Pins

Grooved Pins are parallel pins with three equi-spaced longitudinal grooves. They are rolled or pressed into the cylindrical body to deform the pin stock outward within controlled limits. When this pin is forced into a drilled hole of proper diameter, a locking fit is obtained. Only a straight drilling hole is required and no reaming is needed. A few of them are illustrated above.

Grooved Pins are manufactured from C-40 (EN-8) material. They are supplied in soft condition and natural finish unless otherwise specified by the customer. Our manufacturing range for Grooved pins is from 2 to 16 mm in diameter and 5 to 150 mm in length.

Cylindrical (Dowel) or Parallel Pinsare used either to retain parts in a fixed position or to preserve alignment. A few of them are illustrated above. Type A, B, C, & D are unhardened from C-40 (EN-8) material. Our manufacturing range for Cylindrical (Dowel) Pins is 2mm to 25mm in diameter and 5mm to 150mm in length. Type E is hardened from silver steel material.

Internal Threaded Cylindrical (Dowel) Pinare for easy extraction, from blind holes. They are manufactured in soft condition (Type G) from C-40 material. Hardened Pins (Type F) are manufactured from case hardened alloy steel or as per buyers requirement. Air Vent may be provided.

Cylindrical (Dowel) or Parallel Pinsare used either to retain parts in a fixed position or to preserve alignment. A few of them are illustrated above. Type A, B, C, & D are unhardened from C-40 (EN-8) material. Our manufacturing range for Cylindrical (Dowel) Pins is 2mm to 25mm in diameter and 5mm to 150mm in length. Type E is hardened from silver steel material.

Internal Threaded Cylindrical (Dowel) Pinare for easy extraction, from blind holes. They are manufactured in soft condition (Type G) from C-40 material. Hardened Pins (Type F) are manufactured from case hardened alloy steel or as per buyers requirement. Air Vent may be provided.

Taper Pinsare preferred for parts which have to be taken apart frequently and when driving out the Cylindrical Pins, would tend to wear the holes and also to very accurate constructed tools and gauges which have to be kept in absolute alignment. Taper Pins are manufactured as per IS:6688 or DIN-1 or BS-46.

External & Internal Threaded Taper Pins

Taper Pinsare preferred for parts which have to be taken apart frequently and when driving out the Cylindrical Pins, would tend to wear the holes and also to very accurate constructed tools and gauges which have to be kept in absolute alignment. Taper Pins are manufactured as per IS:6688 or DIN-1 or BS-46.

External & Internal Threaded Taper Pins

Grooved Pins are parallel pins with three equi-spaced longitudinal grooves. They are rolled or pressed into the cylindrical body to deform the pin stock outward within controlled limits. When this pin is forced into a drilled hole of proper diameter, a locking fit is obtained. Only a straight drilling hole is required and no reaming is needed. A few of them are illustrated above.

Grooved Pins are manufactured from C-40 (EN-8) material. They are supplied in soft condition and natural finish unless otherwise specified by the customer. Our manufacturing range for Grooved pins is from 2 to 16 mm in diameter and 5 to 150 mm in length.

Cylindrical (Dowel) or Parallel Pinsare used either to retain parts in a fixed position or to preserve alignment. A few of them are illustrated above. Type A, B, C, & D are unhardened from C-40 (EN-8) material. Our manufacturing range for Cylindrical (Dowel) Pins is 2mm to 25mm in diameter and 5mm to 150mm in length. Type E is hardened from silver steel material.

Internal Threaded Cylindrical (Dowel) Pinare for easy extraction, from blind holes. They are manufactured in soft condition (Type G) from C-40 material. Hardened Pins (Type F) are manufactured from case hardened alloy steel or as per buyers requirement. Air Vent may be provided.