Pall India Pvt. Ltd. Bangalore, Karnataka

Coalescer is a high efficiency separation cartridge that is designed to handle the toughest emulsions. Constructed with a fluoropolymer medium, Pall PhaseSep HE Series Coalescers can be used in a wide range of liquid / liquid separations in the refinery, chemical, flavor & fragrance, and biotechnology industries. The Pall PhaseSep HE Coalescer should be used for difficult emulsions where improved performance is required.  Performance of PhaseSep HE Series Coalescers: Removes sodium down to ≤  1 ppmw in cumene hydroperoxide Decreases sodium to

100% Polypropylene Materials of Construction Retention Ratings from 1.5 to 90 microns (µm) Biologically and Chemically Inert Materials for Wide Compatibility Fast Rinse-Up to 18 Megohm-cm Four Inlet and Outlet Connection Options Allow for Easy Retrofits Proprietary Filter Media Provides High Product Consistency

porous metal fiber medium is specifically designed to optimize particulate capture via its asymmetrical graded pore structure. This structure exhibits the finest pores on the upstream side of the filter media, insuring the capture of particulates at the filters’ first surface, where they are easily removed by in-situ, reverse flow operations. Manufacturing is done completely in-house, including the production of the metal fibers, the formulation of the proprietary base medium, and the design of the element. The process concludes with Pall's scientifically controlled sintering process. The sintering process fuses the structure of the filter media, insuring a “weld-bond” which utilizes no “binders” that might otherwise shed and contaminate downstream equipment and/or final product quality. Produced from fine metal fibers ranging from 2 to 38 μm in diameter, the resulting filtration medium exhibits high-efficiency particulate capture and low flow resistance characteristics. Gaseous service filter cartridge configurations are available in point-of-use designs (i.e. cleaned off-line), or as self-cleaning elements (i.e. blowback filters).

 coalescer housings provide a range of standard vessels to complement the Pall SepraSol and SepraSol Plus liquid/gas coalescers, which are used to remove liquid and solids from a wide range of gas streams found in process industries including refinery, natural gas conditioning, chemical production, and power generation. These housings are available for both the single open-ended and double openended SepraSol coalescer designs and the larger SepraSol Plus coalescer designs. Standard sizes accommodate from 1 to 70 coalescers.   Key Benefits   Combination of these housings with Pall SepraSol elements provide many benefits, including: Lower operating costs Lower capital costs (minimized envelope size) Lower weight Maximum flexibility All Pall SepraSol products contain a patented oleophobic/hydrophobic treatment that enables them to: Drain liquids more quickly and handle higher liquid loads Recover quickly from slugs and upsets Require fewer elements resulting in the smallest vessel for the separation efficiency provided Housings are designed and stamped in accordance with ASME/ANSI BPVC Section VIII Design ratings - three standard design classifications are available: Low Pressure: ANSI - 150 lb., 285 psig (19.65 bar) @ 100°F (37.8°C) Medium Pressure: ANSI - 300 lb., 740 psig (51.02 bar) @ 100°F (37.8°C) High Pressure: ANSI - 600 lb., 1480 psig (102.04 bar) @ 100°F (37.8°C) Carbon steel construction Vent and drain connections, as well as pressure tap ports provided Automatic control options available External paint  

Positive Seal: Standard seal material is Nitrile (H13) available as either an internal o-ring or flat gasket depending on coalescer size.   Outer Drainage Layer:  Drainage of coalesced liquid and protection from re-entrainment is provided by a polymeric outer drainage layer. This ensures consistent, high efficiency performance. Metal Support Core:  Axial strength and protection against liquid slugs are provided by a perforated inner support core constructed of 304 stainless steel. Outer Cage:  Media support during operation is provided by a 304 stainless steel outer support cage. Primary Coalescer:  Coalescing is achieved by use of a high area pleated glass fiber medium that is surrounded by a non-woven polymeric support and drainage layers. A patented surface treatment is used that enhances coalescer performance and lowers fouling tendency and pressure drop. End Caps:  304 stainless steel end caps are used to improve cartridge strength and prevent contaminant bypass.   Key Benefits   Protects process analyzers Safeguards instrument air operated equipment and systems Prevents orifice plugging in pneumatic controllers Improves accuracy of gas measurements in the field or plant Decreases freeze-out and corrosion problems Reduces fouling in small gas-driven engines Provides reproducible high-quality gas for all operations using produced gas

Features Welded construction of bags completely eliminates unfiltered liquid bypass from occurring due to needle holes Available in standard polypropylene, polyester and extended life felt for broad range of product compatibility Glazed finish eliminates fiber migration for clearer results PolyLoc® ring creates a hermetic seal that prevents liquid bypass and produces clearer results Silicone free to eliminate cratering for improved surface results Please refer to the Pall FSI QA Department for compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.